jpopfans1
Member-
Posts
21 -
Joined
-
Last visited
Everything posted by jpopfans1
-
[SOLVED] Install on vmware ESXI
jpopfans1 replied to frank_zero's topic in DSM 5.2 and earlier (Legacy)
There is a thread , look for it -
[SOLVED] Install on vmware ESXI
jpopfans1 replied to frank_zero's topic in DSM 5.2 and earlier (Legacy)
You might have been hacked. Update to a higher version -
XPEnology DS3612xs DSM 4.3 build 3827 (ESXi v1.2)
jpopfans1 replied to Trantor's topic in DSM 5.2 and earlier (Legacy)
I am using the default MAC address and serial number in this build for ESXi. I am getting sudden and frequent shutdown of the VM but not ESXi And possible reason for that ? -
Synology DS3612xs - DSM 4.2 build 3202
jpopfans1 replied to odie82544's topic in DSM 5.2 and earlier (Legacy)
For trying out HA ...... I tried on 3202, the passive DSM is giving out errors .... anyone successful in HA ? -
XPEnology DS3612xs DSM 4.3 build 3827 (ESXi v1.2)
jpopfans1 replied to Trantor's topic in DSM 5.2 and earlier (Legacy)
For trying out HA ...... I tried on 3202, the passive DSM is giving out errors. but with 3810, it seems like the active DSM cannot communicate to the passive at all ......... -
[SOLVED] HP Proliant N40L MicroServer native support
jpopfans1 replied to jnus's topic in DSM 5.2 and earlier (Legacy)
went thru all the post in this thread. but seems no one mention they can do the HA (High Availability) functions. I tried but no luck, anyone has a success story to share ? -
Still can't get HA working in ESXi .......
-
XPEnology DS3612xs DSM 4.3 build 3827 (ESXi v1.2)
jpopfans1 replied to Trantor's topic in DSM 5.2 and earlier (Legacy)
I did the same today, it is working fine with my 2 N54L machines with ESXi, but I still cannot get HA working. I am suspecting the problem comes from the NIC MAC, it might need to be the real NIC MAC. but N54L might not be able to pass thru the real NIC MAC all the way to the VM. I don't know how to do that. ....... -
[SOLVED] Install on vmware ESXI
jpopfans1 replied to frank_zero's topic in DSM 5.2 and earlier (Legacy)
i am trying HA then I chang MAC addresses. have you tried this : viewtopic.php?f=2&t=1999 not sure if it works for ESXi -
I tried ESXi. 2 DSM run on 2 different ESXi boxes. I got some different log messages, but I don't know if those are critical ( caused by ESXi ) ============ Jan 2 01:56:10 DSM-43-AA ha.cgi: net_wol_enable.c:110 Cannot get current wake-on-lan settings Jan 2 01:56:10 DSM-43-AA ha.cgi: net_wol_enable.c:176 Failed to set wake-on-lan eth2 g Jan 2 01:56:10 DSM-43-AA ha.cgi: ha.cc:1666 Failed to set Wake on Lan 2 Jan 2 01:56:10 DSM-43-AA ha.cgi: net_wol_enable.c:110 Cannot get current wake-on-lan settings Jan 2 01:56:10 DSM-43-AA ha.cgi: net_wol_enable.c:176 Failed to set wake-on-lan eth3 g Jan 2 01:56:10 DSM-43-AA ha.cgi: ha.cc:1666 Failed to set Wake on Lan 3 Jan 2 01:56:10 DSM-43-AA kernel: [ 3992.332923] synobios_ioctl: SYNOIO_SET_AUTO_POWERON Jan 2 01:56:10 DSM-43-AA ha.cgi: external_auto_power_on_set.c:70 set auto poweron fail Jan 2 01:56:10 DSM-43-AA ha.cgi: ha.cc:4689 failed to clear rtc schedule poweron Jan 2 01:56:10 DSM-43-AA ha.cgi: ha.cc:1734 Failed to disable schedule power on and off. Jan 2 02:52:48 DSM-43-AA ha.cgi: main.cc:3734 Failed to get remote node information.
-
[SOLVED] Install on vmware ESXI
jpopfans1 replied to frank_zero's topic in DSM 5.2 and earlier (Legacy)
I downloaded the VMDF file from ESXi datastore onto PC, then I use a hex editor to change the MAC address and serial number in the vmdk. then I uploaded back to the datastore, and I bootup the VM. I can see from the Synology assistant that my VM has the modified serial number and MAC address. but when I check inside the VM by bring out the system info, I have a blank serial number, do I need any more edit ? -
XPEnology DS3612xs DSM 4.3 build 3827 (ESXi v1.2)
jpopfans1 replied to Trantor's topic in DSM 5.2 and earlier (Legacy)
I downloaded the VMDF file from ESXi datastore onto PC, then I use a hex editor to change the MAC address and serial number in the vmdk. then I uploaded back to the datastore, and I bootup the VM. I can see from the Synology assistant that my VM has the modified serial number and MAC address modified. but when I check inside the VM by bring out the system info, I have a blank serial number, do I need any more edit ? -
[SOLVED] Install on vmware ESXI
jpopfans1 replied to frank_zero's topic in DSM 5.2 and earlier (Legacy)
Idha, I think you mean 2 VM on a ESXi of a N54L (since you cannot install 2 ESXi into 1 machine). 1 VM is Xpenology another VM with an OS that runs XBMC N54L does not support directpath i/o. But there are other succss stories about using a low cost (low energy is the main reason) display card that can be used from VM (forget if that is windows) and output to TV via HDMI. You can check more. Thank you So I will have to use a 'normal', and not so flexible, install : 1 native OS (with xbmc installed) that hosts a VM for XPenology ... Do you have some advice about Native OS (Linux, Win8.1, WHS2011 ?) and VM technology (Virtual Box, Hyper-V, Workstation, ?) to use in order to get 'honorable' disk performances ? Thank you for all your answers ldha sorry I have not tried myself for other OS with XBMC, but I guess Linux would not be a bad choice because I have read a lot of successful stories of Linux and XBMC, but not with Windows ..... -
[SOLVED] Install on vmware ESXI
jpopfans1 replied to frank_zero's topic in DSM 5.2 and earlier (Legacy)
believe changing the MAC addresses is the first step. I tried with 2xN54L and both are on ESXi 5.1 I did change the MAC addresses, but I got this error message "operation failed. Please re-login and try again" after confirming the HA name and addressess. -
XPEnology DS3612xs DSM 4.3 build 3827 (ESXi v1.2)
jpopfans1 replied to Trantor's topic in DSM 5.2 and earlier (Legacy)
Great build Thx ================= I managed to changed the MAC and serial number of the vmdx file of the 2nd N54L installation. But when I do a HA setup sync, it error out with "operation failed, please re-logon and retry again" any idea ? -
XPEnology DS3612xs DSM 4.3 build 3810++ (repack v1.0)
jpopfans1 replied to Trantor's topic in DSM 5.2 and earlier (Legacy)
is this pack contain LSI card drivers already ? how is the ESXi compatibility ? -
[SOLVED] Install on vmware ESXI
jpopfans1 replied to frank_zero's topic in DSM 5.2 and earlier (Legacy)
Idha, I think you mean 2 VM on a ESXi of a N54L (since you cannot install 2 ESXi into 1 machine). 1 VM is Xpenology another VM with an OS that runs XBMC N54L does not support directpath i/o. But there are other succss stories about using a low cost (low energy is the main reason) display card that can be used from VM (forget if that is windows) and output to TV via HDMI. You can check more. -
XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2)
jpopfans1 replied to Trantor's topic in DSM 5.2 and earlier (Legacy)
how do you resolve the Grub22 repeatedly showing up problem upon restart the DSM VM ? -
[SOLVED] Install on vmware ESXI
jpopfans1 replied to frank_zero's topic in DSM 5.2 and earlier (Legacy)
if the VM (vmdk) is in harddrive, the issue was that the shutdown has some process to write back to the vmdk and upon restart the error comes back. That is what I guess. As have seen other threads saying solutions are just terminate the VM (not shutdown) or don't use VM but boot from the thumb drive which the DSM is install into and unplug the thumb driver after boot up or write protect it. -
[SOLVED] Install on vmware ESXI
jpopfans1 replied to frank_zero's topic in DSM 5.2 and earlier (Legacy)
Seems the Grub 22 error of DSM 4.2 3211 upon restart after installed in ESXi cannot be solved. The repeated uploading the flat.vmdk is not practical. Plus the secondary drive needs to be an IDE drive is not a solution. so can only stick to 3202 for now. -
HP N54L Microserver - Getting Everything Working
jpopfans1 replied to Dadudeondacouch's topic in AMD
may I know the Trantor's DS3612xs DSM 4.2 build 3211++ (repack v1.2)" a 32bit or 64bit OS ?