snake2005

My media server is back to normal after doing this: MEDIA SERVER showing empty folders on TV: 1. login as admin 2. type sudo -i for root access and type your admin password 3.check if folders exist : /homes /homes/admin 3a. if yes : root@BlackBox:~# chown admin: /var/services/homes/admin root@BlackBox:~# synoservice --stop pgsql some service depend on service [pgsql] is still running, use --hard-stop to stop all related service root@BlackBox:~# synoservice --hard-stop pgsql warn: The runkey of service [pgsql] and its dependency services have been set to "No" root@BlackBox:~# synoservice --hard-start pgsql 3b. if no, do: mkdir /var/services/homes mkdir /var/services/homes/admin and go to step 3a. 4. shutdown diskstation 5. power on diskstation

I've tried but still not working. I've un-installed media server and installed MiniDLNA from here http://synology.nimloth.pl/ and works fine. Thank you for your advice.

I've tried but still showing empty folders. I've updated dsm to 6.1.3u5 and still same issue.

1 LAN Adapter

I've updated DSM 5.2 to 6.1.3. I can see the shared folders (video, music, photo) from any tv in house but these folders are empty. Was working fine on dsm 5.2. Tried to reindex folders and reinstalled media server but same thing folders with no content. Any advice ?

Hi JMMR, Drivers for TBS6281SE are the same with TBS6281 ? Thanks Sent from my iPhone using Tapatalk

Hi, I have a new system and I have DSM 5.2-5592 Update 4. I insmod all modules in the exact same order as you recommended me in previous posts and the modules are insmoded without any errors and when I start tvheadend the tuner is not shown, I tried also in DVBlink but the tuner is not shown as well. Do you have any clue how to fix it ? Thanks

I have dvblink with license installed with dvblink tvbutler tuner and it works, but there are only a few TBS tuners that are accepted and works with dvblink ( TBS5922 DVB-S2 TV Tuner USB (DVB-S/S2) ,TBS 5980 CI (DVB-S/S2), TBS 5680 CI (DVB-C), TBS DVB-C USB stick) and unfortunately TBS5881 is not supported and will not be supported by dvblink.

I tried your modules but no success, here is dmesg : [ 8868.903085] dvb_usb_tbs5881: Unknown symbol dvb_ca_en50221_init (err 0) [ 8868.903129] dvb_usb_tbs5881: Unknown symbol dvb_ca_en50221_release (err 0) [ 8868.903168] dvb_usb_tbs5881: Unknown symbol dvb_usb_device_init (err 0) [ 8868.903184] dvb_usb_tbs5881: Unknown symbol dvb_usb_device_exit (err 0) [ 9308.665780] ir_lirc_codec: Unknown symbol lirc_unregister_driver (err 0) [ 9308.665802] ir_lirc_codec: Unknown symbol lirc_dev_fop_poll (err 0) [ 9308.665872] ir_lirc_codec: Unknown symbol rc_core_debug (err 0) [ 9308.665889] ir_lirc_codec: Unknown symbol lirc_dev_fop_open (err 0) [ 9308.665929] ir_lirc_codec: Unknown symbol lirc_get_pdata (err 0) [ 9308.665949] ir_lirc_codec: Unknown symbol lirc_dev_fop_close (err 0) [ 9308.665967] ir_lirc_codec: Unknown symbol lirc_dev_fop_read (err 0) [ 9308.665983] ir_lirc_codec: Unknown symbol lirc_register_driver (err 0) [ 9308.666014] ir_lirc_codec: Unknown symbol ir_raw_handler_register (err 0) [ 9308.666030] ir_lirc_codec: Unknown symbol lirc_dev_fop_ioctl (err 0) [ 9308.666050] ir_lirc_codec: Unknown symbol ir_raw_handler_unregister (err 0) [ 9560.292495] lirc_dev: IR Remote Control driver registered, major 248 [ 9580.210023] ir_mce_kbd_decoder: Unknown symbol rc_core_debug (err 0) [ 9580.210060] ir_mce_kbd_decoder: Unknown symbol ir_raw_handler_register (err 0 ) [ 9580.210081] ir_mce_kbd_decoder: Unknown symbol ir_raw_handler_unregister (err 0) [ 9588.082972] ir_sony_decoder: Unknown symbol rc_core_debug (err 0) [ 9588.082997] ir_sony_decoder: Unknown symbol rc_keydown (err 0) [ 9588.083022] ir_sony_decoder: Unknown symbol ir_raw_handler_register (err 0) [ 9588.083041] ir_sony_decoder: Unknown symbol ir_raw_handler_unregister (err 0) [ 9605.174033] ir_jvc_decoder: Unknown symbol rc_repeat (err 0) [ 9605.174064] ir_jvc_decoder: Unknown symbol rc_core_debug (err 0) [ 9605.174093] ir_jvc_decoder: Unknown symbol rc_keydown (err 0) [ 9605.174124] ir_jvc_decoder: Unknown symbol ir_raw_handler_register (err 0) [ 9605.174148] ir_jvc_decoder: Unknown symbol ir_raw_handler_unregister (err 0) [ 9617.043495] ir_rc6_decoder: Unknown symbol rc_core_debug (err 0) [ 9617.043543] ir_rc6_decoder: Unknown symbol rc_keydown (err 0) [ 9617.043589] ir_rc6_decoder: Unknown symbol ir_raw_handler_register (err 0) [ 9617.043625] ir_rc6_decoder: Unknown symbol ir_raw_handler_unregister (err 0) [ 9636.570295] dvb_usb_tbs5881: Unknown symbol dvb_ca_en50221_init (err 0) [ 9636.570364] dvb_usb_tbs5881: Unknown symbol dvb_ca_en50221_release (err 0) [ 9636.570404] dvb_usb_tbs5881: Unknown symbol dvb_usb_device_init (err 0) [ 9636.570420] dvb_usb_tbs5881: Unknown symbol dvb_usb_device_exit (err 0) [ 9663.463117] ir_rc5_decoder: Unknown symbol rc_core_debug (err 0) [ 9663.463140] ir_rc5_decoder: Unknown symbol rc_keydown (err 0) [ 9663.463164] ir_rc5_decoder: Unknown symbol ir_raw_handler_register (err 0) [ 9663.463182] ir_rc5_decoder: Unknown symbol ir_raw_handler_unregister (err 0) [ 9676.158870] dvb_usb: Unknown symbol dvb_dmxdev_init (err 0) [ 9676.158989] dvb_usb: Unknown symbol dvb_register_adapter (err 0) [ 9676.159051] dvb_usb: Unknown symbol dvb_dmx_swfilter_204 (err 0) [ 9676.159075] dvb_usb: Unknown symbol dvb_dmx_release (err 0) [ 9676.159110] dvb_usb: Unknown symbol rc_register_device (err 0) [ 9676.159142] dvb_usb: Unknown symbol dvb_net_init (err 0) [ 9676.159163] dvb_usb: Unknown symbol dvb_dmx_swfilter (err 0) [ 9676.159187] dvb_usb: Unknown symbol dvb_dmxdev_release (err 0) [ 9676.159209] dvb_usb: Unknown symbol rc_free_device (err 0) [ 9676.159231] dvb_usb: Unknown symbol dvb_frontend_detach (err 0) [ 9676.159251] dvb_usb: Unknown symbol dvb_net_release (err 0) [ 9676.159270] dvb_usb: Unknown symbol rc_allocate_device (err 0) [ 9676.159293] dvb_usb: Unknown symbol dvb_unregister_frontend (err 0) [ 9676.159320] dvb_usb: Unknown symbol dvb_register_frontend (err 0) [ 9676.159338] dvb_usb: Unknown symbol dvb_unregister_adapter (err 0) [ 9676.159390] dvb_usb: Unknown symbol dvb_dmx_init (err 0) [ 9676.159417] dvb_usb: Unknown symbol rc_unregister_device (err 0) [ 9685.602488] TBS version 160405 [ 9697.333382] ir_nec_decoder: Unknown symbol rc_repeat (err 0) [ 9697.333404] ir_nec_decoder: Unknown symbol rc_core_debug (err 0) [ 9697.333425] ir_nec_decoder: Unknown symbol rc_keydown (err 0) [ 9697.333449] ir_nec_decoder: Unknown symbol ir_raw_handler_register (err 0) [ 9697.333466] ir_nec_decoder: Unknown symbol ir_raw_handler_unregister (err 0) i will wait for newer version . thanks again for your support.

No. I've told you earlier I get errors when I run insmod for all modules like for example : Synology> insmod tbs5881fe.ko insmod: can't insert 'tbs5881fe.ko': invalid module format then I run dmesg to see what happened and I get this : Synology> dmesg [ 383.780270] tbs5881fe: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' [ 1062.014102] dvb_usb_tbs5881: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' [ 1103.519260] ir_lirc_codec: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' [ 1130.125424] lirc_dev: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' [ 1146.017437] ir_mce_kbd_decoder: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' I think I need to install ubuntu with kernel version 3.10.35 on a separate machine again because I'm running kernel 4.2.0-27-generic and as seen on dmesg on xpenology the 3.10.35 is the current linux kernel running on xpenology, and then redo all steps . I hope this method will fix the invalid module format errors.

after I run dmesg I get this : [ 383.780270] tbs5881fe: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' [ 1062.014102] dvb_usb_tbs5881: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' [ 1103.519260] ir_lirc_codec: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' [ 1130.125424] lirc_dev: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' [ 1146.017437] ir_mce_kbd_decoder: version magic '4.2.0-27-generic SMP mod_unload modversions ' should be '3.10.35 SMP mod_unload ' I think it is something with the ubuntu version ? Any clues ?

Thank you! I will wait for newer version.

I have : DSM: DSM 5.2-5644 Update 5 Synology> uname -a Linux Synology 3.10.35 #1 SMP Tue Feb 2 17:44:24 CET 2016 x86_64 GNU/Linux synology_bromolow_3615xs XPEnoboot DS3615xs5.2-5644.5 The drivers are installed on Ubuntu Linux ubuntu14 4.2.0-27-generic #32~14.04.1-Ubuntu SMP Fri Jan 22 15:32:26 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

I've tried to run one by one as you said : insmod tbs5881fe.ko insmod ir-lirc-codec.ko insmod lirc-dev.ko insmod ir-mce-kbd-decoder.ko insmod ir-sony-decoder.ko insmod ir-jvc-decoder.ko insmod ir-rc6-decoder.ko insmod dvb-usb-tbs5881.ko insmod ir-rc5-decoder.ko insmod dvb-usb.ko insmod dvb-core.ko insmod ir-nec-decoder.ko insmod rc-core.ko but I get this message for all modules for example : Synology> insmod /lib/modules/backports_dvb/tbs5881fe.ko insmod: can't insert 'tbs5881fe.ko': invalid module format

Hi, Thank you for your tutorial. I followed your steps and I don't know what to do at step 2, please help. I installed latest TBS driver from http://www.tbsdtv.com/download/document ... 160630.zip for my TBS 5881 usb tuner on DVB-T mode on Ubuntu and when I run lsmod I get this : root@ubuntu14:/home/marcus# lsmod Module Size Used by ipt_MASQUERADE 16384 3 nf_nat_masquerade_ipv4 16384 1 ipt_MASQUERADE iptable_nat 16384 1 nf_nat_ipv4 16384 1 iptable_nat nf_nat 24576 2 nf_nat_ipv4,nf_nat_masquerade_ipv4 nf_conntrack_ipv4 16384 2 nf_defrag_ipv4 16384 1 nf_conntrack_ipv4 xt_conntrack 16384 1 nf_conntrack 106496 5 nf_nat,nf_nat_ipv4,xt_conntrack,nf_nat_masquerade_ipv4,nf_conntrack_ipv4 ipt_REJECT 16384 2 nf_reject_ipv4 16384 1 ipt_REJECT xt_CHECKSUM 16384 1 iptable_mangle 16384 1 xt_tcpudp 16384 6 bridge 114688 0 stp 16384 1 bridge llc 16384 2 stp,bridge ip6table_filter 16384 0 ip6_tables 28672 1 ip6table_filter iptable_filter 16384 1 ip_tables 28672 3 iptable_filter,iptable_mangle,iptable_nat ebtable_nat 16384 0 ebtables 36864 1 ebtable_nat x_tables 36864 11 ip6table_filter,xt_CHECKSUM,ip_tables,xt_tcpudp,ipt_MASQUERADE,xt_conntrack,iptable_filter,ebtables,ipt_REJECT,iptable_mangle,ip6_tables tbs5881fe 53248 1 ir_lirc_codec 16384 0 ppdev 20480 0 lirc_dev 20480 1 ir_lirc_codec ir_mce_kbd_decoder 16384 0 ir_sony_decoder 16384 0 ir_jvc_decoder 16384 0 coretemp 16384 0 ir_rc6_decoder 16384 0 vmw_balloon 16384 0 dvb_usb_tbs5881 24576 1 ir_rc5_decoder 16384 0 dvb_usb 28672 1 dvb_usb_tbs5881 crct10dif_pclmul 16384 0 dvb_core 106496 2 dvb_usb,dvb_usb_tbs5881 ir_nec_decoder 16384 0 crc32_pclmul 16384 0 rc_core 28672 8 ir_lirc_codec,ir_rc5_decoder,dvb_usb,ir_nec_decoder,ir_sony_decoder,ir_mce_kbd_decoder,ir_jvc_decoder,ir_rc6_decoder joydev 20480 0 vmwgfx 172032 1 input_leds 16384 0 cryptd 20480 0 serio_raw 16384 0 ttm 94208 1 vmwgfx 8250_fintek 16384 0 drm_kms_helper 126976 1 vmwgfx drm 360448 4 ttm,drm_kms_helper,vmwgfx shpchp 36864 0 vmw_vmci 65536 0 i2c_piix4 24576 0 parport_pc 32768 0 mac_hid 16384 0 lp 20480 0 parport 49152 3 lp,ppdev,parport_pc hid_generic 16384 0 usbhid 49152 0 hid 118784 2 hid_generic,usbhid psmouse 126976 0 mptspi 24576 2 mptscsih 40960 1 mptspi mptbase 98304 2 mptspi,mptscsih vmxnet3 49152 0 scsi_transport_spi 32768 1 mptspi pata_acpi 16384 0 I don't know which modules to copy because there are only 2 for TBS5881 and I don't see the others which needed to copy as you showed in your example : saa716x_tbs-dvb.ko saa716x_core.ko tbs62x1fe.ko (this one is the one related to my card, others are dvb-core.ko dependences) tbs6290fe.ko tbs6991se.ko tbs6928fe.ko tbs6922fe.ko tbs6983fe.ko tbs6618fe.ko tbs6991fe.ko tbs6982se.ko tbs6928se.ko tbs6985se.ko tbs6923fe.ko tbs6680fe.ko tbs6982fe.ko stv090x.ko rc-core.ko dvb-core.ko Thank you!

xpe team wont include tbs drivers because they have to be compiled in dvb-c or dvb-t mode, you have to build yourself, and its very simple. i can compile them for you if you want, you have to tell me what mode do you want, and you have to know what modules you need to start. i can compile both modes if someone want them, but you guys need to know all dependences that are needed. i have one tbs6281 in dvb-c mode, and i need this modules to work as exemple: saa716x_tbs-dvb.ko saa716x_core.ko tbs62x1fe.ko (this one is the one related to my card, others are dvb-core.ko dependences) tbs6290fe.ko tbs6991se.ko tbs6928fe.ko tbs6922fe.ko tbs6983fe.ko tbs6618fe.ko tbs6991fe.ko tbs6982se.ko tbs6928se.ko tbs6985se.ko tbs6923fe.ko tbs6680fe.ko tbs6982fe.ko stv090x.ko rc-core.ko dvb-core.ko Hi JMMR, Thank you for your answer. I need both drivers to be compiled in DVB-C mode if you can help me it will be brilliant or if you can explain the procedure of compiling them. I want to use them with TVheadend and DVBLogic packages. Thank you again.

Hi Trantor! Is there any possibilities to put TBS TV Tuners drivers for this models : TBS5881 USB DVB-T2/T/C CI TV Box TBS6205 Quad Tuner PCIe Card drivers can be downloaded from : http://www.tbsdtv.com/download/ Thank you!