lugggoos

Worked again. 5592 Update 4

THX @Cliffield Läuft prima auf dem N54L!

Worked again with 5.1-5022.4 Perfect Settings for the N54L are: esataportcfg=0x10 internalportcft=0x2F usbportcfg=0x1FC0

Worked again with 5.1-5022.4 Perfect Settings for the N54L are: esataportcfg=0x10 internalportcft=0x2F usbportcfg=0x1FC0

Seems to be netherlandish not german but: just says that now it is possible to install DSM5.1 on a DS*10 and higher. Before the update it was only possible to install on a DS*11 or higher.

Correct Settings for the N54l. This sets the ODD to internal and keeps the eSata as eSataport. esataportcfg=0x10 internalportcft=0x2F usbportcfg=0x1FC0

Keep in mind that your eSata Port at the back of the N54L is now also a internal Sata Port. Maybe you could try if one of the other Configs works for you. Then we would have a knowledge about which port is the ODD port.

Based on viewtopic.php?f=2&t=1502 Try this: esataportcfg=0x0 internalportcft=0x3f usbportcfg=0x1FC0 Meaning: No eSataports, every port ist used as internal Sata. Or this: esataportcfg=0x20 internalportcft=0x1F usbportcfg=0x1FC0 Meaning: One of the eSata ports ist used as eSata, all others are internal Sata. Or this: esataportcfg=0x10 internalportcft=0x2F usbportcfg=0x1FC0 Meaning: The other one of eSata ports is used as eSata, all others are internal Sata.

Seit dem Update von 5.0 4493 auf 4528 habe ich beim N54L mit WD Red kein Spindown der HDD mehr. Einstellungen wurden keine geändert. Unter 4493 hat der Spindown ohne Probleme funktioniert. Jemand ähnliche Erfahrungen?

https://www-user.tu-chemnitz.de/~ddet/t ... e-updates/

Look at my initial Post of this Thread. For handling just the ODD or! the external as eSata try: esataportcfg=0x20 or 0x10 internalportcft=0x1F or 0x2F usbportcfg=0x1FC0 Setting esataportcfg to 0x30 will use ODD and! External as eSata. If you understand the Bin to Hex then you could fingure out the Settings yourself.

Habe von U3 auf U7 geupdatet (mit ssh Befehlen). N40l ist nach dem Update nicht neu gestartet - Hardware aus und eingeschaltet und alles läuft ohne Probleme auf U7

Have a quick look at this: viewtopic.php?f=2&t=1502

Worked again at 5.0-4493 Update 3

Maybe try this: viewtopic.php?f=2&t=1502&p=15872&hilit=esata#p15872

Have a look over here: viewtopic.php?f=2&t=1502&p=15872&hilit=esata#p15872

Oh you´re right... i changed something. Instead of "Once you see the “DiskStation prompt”, load Synology Assistant and search for devices, Once found double click the device." i did a right-click and used "INSTALL".

Probiert das mal aus: viewtopic.php?f=2&t=1502

Just use the Guide you posted. Works like charm. Did the Upgrade from 4.2-3211 Trantor to 5.0 Update 2 yesterday without loosing Data. btw a Backup is alway a good idea doing this

Have a look over there: viewtopic.php?f=2&t=1502

Still works with gnoboot / DSM 5.0 (update2)

Solved it. SSH to your Station and edit /etc/synoinfo.conf and /etc.defaults/synoinfo.conf esataportcfg=0x30 internalportcfg=0xf usbportcfg=0x1FC0 This sets the odd and the esataport to esata. Edit: Hex in Bin ( 7 usb 2esata/odd 4internal) 0x30 = 0000000 11 0000 (you could try ´[0x20=0000000 10 0000] the other one should be the odd port) 0xf = 0000000 00 1111 0x1fc0 = 1111111 00 0000

From the main screen go to ‘Chipset > Southbridge Configuration > SB SATA Configuration’ and make sure your settings are the same as below: OnChip SATA Channel = Enabled SATA PORTS 4/5 IDE mode = Disabled SATA EPS on all PORT = Enabled SATA Power on all PORT = Enabled Return to the main screen then go to ‘Advanced > IDE Configuration’ and again, make sure your settings are the same as below. Embedded SATA Link Rate = 3.0Gbps MAX Yep. Did everything above. EDIT: Its weird. Everyone writes about how to use the eSata as an internal Sata. For me its never been a Problem... Even with the original HP Bios. EDIT2: viewtopic.php?f=2&t=1028&start=80#p5413 This might be the Solution. Mh have to figure out the correct Values.

Im using XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2) on a HP N54L. I connected an 3TB WD Harddrive via eSata. My Problem is that the eSata-Drive is not under external device. It appears in the Store-Manager. So no HotPlug! The Drive should be used as a Backup of the internal Drives. So Hotplug would be fine... Someone with the same Problem?? SOLVED: SSH to your Station and edit /etc/synoinfo.conf and /etc.defaults/synoinfo.conf For N54l edit this: esataportcfg=0x10 internalportcft=0x2F usbportcfg=0x1FC0