_NAS?

I solved the problem by download the file again I have a problem however, the file station does not work (When I click it, it loads forever and nothing happens.)

yes, I followed the guide, and I have not activated MD5 hash on win32diskimager. I tried to use 3 different usb stick (250mb, 1gb and 4gb), but nothing to do Can there be any problem in the configuration of the bios?

hello, I'm trying to install Xpenology DS3612XS_3211 1.2v repack by Trentor on HP N54L, but I have a problem! I set the bios to have the first boot on usb. then turned off HP N54L. I prepared the usb stick with win32diskimager, I inserted on N54L and when the screen is black with the word "grub loading Stage 1.5. Grub loading, please wait ... Error 17". What can I do?

hello, I'm trying to install Xpenology DS3612XS_3211 1.2v repack by Trentor on HP N54L, but I have a problem! I set the bios to have the first boot on usb. then turned off HP N54L. I prepared the usb stick with win32diskimager, I inserted on N54L and when the screen is black with the word "grub loading Stage 1.5. Grub loading, please wait ... Error 17". What can I do?

Thank you For burn the usb stick whith Win 32 Disk Imager I have to select "MD5 hash"?

Hello, for download Synology Asisstant, is correct the version 4.3-4206 for this version of Xpenology?

Ok to burn the usb stick with Win32 disk imager, I have to select "MD5 hash"? The rest of the steps I've written before correct?

Perfect! Thank you On N54L install the version DS3612xs DSM 4.2 build 3202 or DS3612xs DSM 4.2 build 3211 repack v1.2?

I'm sorry, but what about the 8 point I do not understand what you mean. (google translate does not translate well meaning). Can you explain in other words, please?

Thank you again Making a list: 1) I have to burn the usb stick with WIN32DISKIMAGER 2) connect to N54L monitor with VGA cable and mouse + keyboard 2) insert the usb stick in N54L 3) start N54L 4) Open Synology Assistant on pc 5) synology assistant when he found N54L, confirm and remove the usb stick from N54L. Then you have to follow the instructions through the monitor. 6) when N54L is restarted because of Synology Assistant, insert the usb stick on N54L 7) the installation is finished on the inside N54L with usb stick, right? 8) leave the usb stick always on N54L, right?

Thank you. That's the reason, I was worried!

Hello, I used to copy the file xpenology .img win32disimager, then the usb was no longer recognized. I formatted. The original capacity was 250mb, now only 15.6 mb! Going on Windows 7 disk management, says there is a primary partition of 16MB and 235MB of unallocated, now how do I do?

Ah, now I understand! Considering that for the moment I'll just 1 hard drive, and I do not care put 5, I avoid to modify the BIOS , right? In my case that N54L does not go online but it is only connected via LAN cable crossover to the pc , I have to do what you did for changing the MAC address ? Practically the guide for my needs would start from " Started the install of XPEnology_trantor_v1.2_DSM_DS3612xs_3211.pat from Synology Assistant. Set the admin password and the name of my server. I went with DHCP , but you may Set the IP -address to be fixed During the install. When the server reboots in the process , I put in the USB stick again . The server finished the install and a few moments later it was ready for access from the browser. " ? I did not understand very well. I have to burn xpenology in the pen with win32diskmanager usb , pen usb to connect N54L , and from there you install it, right? (I think during installation, you must be connected to the internet and a monitor right?) . After installing it on N54L , N54L restarts, and I can remove the usb, right? The last thing , N54L connect to pc windows 7 professional 64bit with crossover LAN cable , install Synology Assistant on the PC, and then everything is ready to exchange data ? PS: now the download file works, but is very slow, I try to download it later

Hello, thank you I tried to download the files. zip the last link, but the download does not start for the fifth bay for HDD imagine that you took out of the slot 5.25 ", right? Why did you have to modify the BIOS and MAC address?

You need the IP address to start configuring. At least for the installation part. DHCP server on router or workstation will give this nas a starting ip. After you see it with synology assistant and have configured static address, you can use it with your crossover cable connected simple network. DHCP server will no longer needed. To get the IP address I connect N54L to the router at least when I configure xpenology? Then once this step is done, I can disconnect N54L from the router and connect it to the PC with only crossover cable? (can you tell me the procedure for configuring, please?)