Jump to content
XPEnology Community

VANTOM

Member
  • Posts

    43
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

VANTOM's Achievements

Junior Member

Junior Member (2/7)

0

Reputation

  1. Leider bleibt sie da hängen und ich habe keinen Zugriff
  2. was ist das und was bringt mir das? benutze quickconnect nicht
  3. Was känntest du mir für eine karte empfehlen? 8 ports würden reichen
  4. Das ist das teil: MZHOU PCIe SATA Karte 10 Port, PCI-E zu SATA Erweiterungskarte,6Gbps Controllerkarte Unterstützung von SSD und HDD für Windows10/8/7/XP/Vista/Linux https://amzn.eu/d/4NKUxVi
  5. I use VMM and a have a rx 570 and want to use it in a vm in VMM
  6. habe eine 10 Port sata karte eingebaut, leider werden jetzt aber platte 13 -40 angezeigt, kann ich die Port irgendwie auf 1-12 mappen?
  7. Is it possible? I want a plex player (linux witch plex app) in a VM. Can i use the internal grafik to show it on my tv?
  8. Ist es möglich? Würde eigentlich nur ein System benötigen wo ich plex abspielen kann. Wär optimal wenn ich nicht noch ein Gerät verwenden müsste und das nas läuft ja sowieso immer?
  9. Super danke. Habe mir die zweite bestellt. Das is ja preislich voll im Rahmen Außerdem habe ich dann 2 Plätze mehr zum stecken
  10. Welche karten könntest du mir empfehlen? Habe nur 1gbit lan im Haus
  11. admin@DiskStation:/$ lspci -v |grep 0106 0000:00:1f.2 Class 0106: Device 8086:8c02 (rev 05) (prog-if 01) 0000:02:00.0 Class 0106: Device 1b4b:9172 (rev 11) (prog-if 01) 0000:03:00.0 Class 0106: Device 1b4b:9215 (rev 11) (prog-if 01) admin@DiskStation:/$ ash-4.3# dd bs=10M count=256 if=/dev/zero of=/volume1/testx conv=fdatasync 256+0 records in 256+0 records out 2684354560 bytes (2.7 GB) copied, 37.8063 s, 71.0 MB/s ash-4.3# dd bs=10M count=256 if=/dev/zero of=/volume2/testx conv=fdatasync 256+0 records in 256+0 records out 2684354560 bytes (2.7 GB) copied, 12.5612 s, 214 MB/s ash-4.3# dd bs=10M count=256 if=/dev/zero of=/volume3/testx conv=fdatasync dd: error writing ‘/volume3/testx’: No space left on device 1+0 records in 0+0 records out 0 bytes (0 B) copied, 0.00222423 s, 0.0 kB/s ash-4.3# dd bs=10M count=256 if=/dev/zero of=/volume4/testx conv=fdatasync 256+0 records in 256+0 records out 2684354560 bytes (2.7 GB) copied, 16.3883 s, 164 MB/s ash-4.3# dd bs=10M count=256 if=/dev/zero of=/volume5/testx conv=fdatasync 256+0 records in 256+0 records out 2684354560 bytes (2.7 GB) copied, 22.362 s, 120 MB/s ash-4.3# dd bs=10M count=256 if=/dev/zero of=/volume6/testx conv=fdatasync 256+0 records in 256+0 records out 2684354560 bytes (2.7 GB) copied, 27.2905 s, 98.4 MB/s ash-4.3# dd bs=10M count=256 if=/dev/zero of=/volume7/testx conv=fdatasync 256+0 records in 256+0 records out 2684354560 bytes (2.7 GB) copied, 5.54715 s, 484 MB/s ash-4.3# das kommt raus dabei
  12. Ist leider ewig her. Wo kann ich den loader nachsehen? Ja hab genau das board mit 10 Platten also 1 pci-e 4x sata adapter
  13. Meine dsm ist beim internen kopieren nur max 60 mb/s schnell(bzw langsam) währenddessen kann man die Oberfläche kaum bedienen. Nur mit sehr viel Geduld und Wartezeit. CPU ist ein i7 4770s mit 32gb ram. Auslastung beiedes laut Anzeige max 3% was könnte mein Problem sein?
  14. Hat funktioniert. Hab jetz nen i7 4770s und 32gb ram drin wie kann ich die DSM updaten?
×
×
  • Create New...