Jump to content
XPEnology Community

chechill

Transition Member
  • Posts

    17
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

chechill's Achievements

Junior Member

Junior Member (2/7)

0

Reputation

  1. Many thanks Peter. Can you tell me witch is the better thread i must copy that info?
  2. Nope. Booting TC Linux is fast, IP is assigned in 10-20 seg from power on. Testing with DSM 7.1.0 3615. Boots in 1 min, always. Attached /var/log/messages from last 918+ install. Maybe helps var log messages.txt ergio@synology:/$ dmesg | grep error [ 13.001726] intel-lpss: probe of 0001:00:16.0 failed with error -22 [ 13.001739] intel-lpss: probe of 0001:00:18.0 failed with error -22 [ 13.001751] intel-lpss: probe of 0001:00:19.0 failed with error -22 [ 13.001762] intel-lpss: probe of 0001:00:19.2 failed with error -22 [ 19.015211] ahci: probe of 0001:01:00.0 failed with error -22 [ 19.021247] ahci: probe of 0001:00:12.0 failed with error -22 [ 49.835627] xhci_hcd: probe of 0001:00:15.0 failed with error -16 [ 52.755200] <redpill/bios_shim.c:215> Symbol #54 in mfgBIOS "apollolake_synobios" {synobios_sata_error_report}<ffffffffa00e5460> [ 52.779446] <redpill/bios_shim.c:215> Symbol #56 in mfgBIOS "apollolake_synobios" {synobios_record_scsi_error_event}<ffffffffa00e5510> [ 52.792120] <redpill/bios_shim.c:215> Symbol #57 in mfgBIOS "apollolake_synobios" {synobios_error_btrfs_meta_corrupted_event}<ffffffffa00e5570> [ 52.805619] <redpill/bios_shim.c:215> Symbol #58 in mfgBIOS "apollolake_synobios" {synobios_error_fs_btrfs_event}<ffffffffa00e55c0> [ 52.818040] <redpill/bios_shim.c:215> Symbol #59 in mfgBIOS "apollolake_synobios" {synobios_error_fs_event}<ffffffffa00e5610> [ 52.866460] <redpill/bios_shim.c:215> Symbol #63 in mfgBIOS "apollolake_synobios" {synobios_error_oom_event}<ffffffffa00e5840> [ 281.694534] igb: probe of 0001:02:00.0 failed with error -5 [ 281.694558] igb: probe of 0001:03:00.0 failed with error -5 [ 285.627759] <redpill/bios_shim.c:215> Symbol #54 in mfgBIOS "apollolake_synobios" {synobios_sata_error_report}<ffffffffa028b460> [ 285.627762] <redpill/bios_shim.c:215> Symbol #56 in mfgBIOS "apollolake_synobios" {synobios_record_scsi_error_event}<ffffffffa028b510> [ 285.627764] <redpill/bios_shim.c:215> Symbol #57 in mfgBIOS "apollolake_synobios" {synobios_error_btrfs_meta_corrupted_event}<ffffffffa028b570> [ 285.627766] <redpill/bios_shim.c:215> Symbol #58 in mfgBIOS "apollolake_synobios" {synobios_error_fs_btrfs_event}<ffffffffa028b5c0> [ 285.627768] <redpill/bios_shim.c:215> Symbol #59 in mfgBIOS "apollolake_synobios" {synobios_error_fs_event}<ffffffffa028b610> [ 285.627777] <redpill/bios_shim.c:215> Symbol #63 in mfgBIOS "apollolake_synobios" {synobios_error_oom_event}<ffffffffa028b840> [ 295.224389] r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168h-2.fw failed with error -2
  3. Tryed again. Same problems, after install, on next reboot, about 10-15 min to get IP. Always the same problem. Installation goes OK. Download time goes long like you but 100% downloaded. I have done the last tests with the integrated LAN card. This time same tests with a new PCIe Gigabit LAN TP-link TG-3468 with Realteck chipset RTL8168B. 1º No LAN link led after the reboot. 2º Power OFF the NAS 3º Power ON the NAS 4º Now LAN link led blinks 5º Makint a ping -t <IP> - Time 13 Min to get IP 6º logging to DSM OK. Dissable IPV6 in Manager LAN options 7º Reboot NAS. Making ping -t and gets 6 min to get IP Those timmings happens with PCIe NIC and internal NIC.
  4. Yes, i have baremetall install on asrock J4205 motherboard. Sure that i'm doing something wrong but i don't know what. tc@box:~$ wget https://github.com/PeterSuh-Q3/tinycore-redpill/raw/main/my.sh.gz ; tar -zxvf my.sh.gz; Connecting to github.com (140.82.112.4:443) Connecting to raw.githubusercontent.com (185.199.108.133:443) saving to 'my.sh.gz' my.sh.gz 100% |********************************| 3015 0:00:00 ETA 'my.sh.gz' saved my.sh tc@box:~$ ./my.sh DS918+ MODEL is DS918+ Checking Internet Access -> OK Checking if a newer mshell version exists on the repo -> There is a newer versio n of m shell script on the repo should we use that ? [yY/nN]y OK, updating, please re-run after updating m.sh Updating m shell with latest updates tc@box:~$ ./my.sh DS918+ MODEL is DS918+ Checking Internet Access -> OK Checking if a newer mshell version exists on the repo -> Version is current tcrppart is sdb3 making directory /mnt/sdb3/auxfiles and make link custom-module TARGET_PLATFORM is apollolake Checking Internet Access -> OK Checking if a newer version exists on the repo -> There is a newer version of th e script on the repo should we use that ? [yY/nN]OK, updating, please re-run aft er updating Updating tinycore loader with latest updates Backing up files to /mnt/sdb3//mydata.tgz Done. Performing a full TCRP upgrade Warning some of your local files will be moved to /home/tc/old/xxxx.2022-May-04- 06-11 Updating custom_config.json % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 33840 100 33840 0 0 44351 0 --:--:-- --:--:-- --:--:-- 202k Updating global_config.json % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 5692 100 5692 0 0 8992 0 --:--:-- --:--:-- --:--:-- 8992 Updating modules.alias.3.json.gz mv: cannot stat 'modules.alias.3.json.gz': No such file or directory % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 5591 100 5591 0 0 12424 0 --:--:-- --:--:-- --:--:-- 12424 Updating modules.alias.4.json.gz mv: cannot stat 'modules.alias.4.json.gz': No such file or directory % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 89007 100 89007 0 0 182k 0 --:--:-- --:--:-- --:--:-- 182k Updating rpext-index.json % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 211k 100 211k 0 0 325k 0 --:--:-- --:--:-- --:--:-- 325k Updating user_config.json % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 431 100 431 0 0 687 0 --:--:-- --:--:-- --:--:-- 10775 Updating dtc mv: cannot stat 'dtc': No such file or directory % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 146k 100 146k 0 0 194k 0 --:--:-- --:--:-- --:--:-- 194k Updating rploader.sh % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 78809 100 78809 0 0 164k 0 --:--:-- --:--:-- --:--:-- 164k Updating ds1621p.dts mv: cannot stat 'ds1621p.dts': No such file or directory % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 3026 100 3026 0 0 4864 0 --:--:-- --:--:-- --:--:-- 73804 Updating ds920p.dts mv: cannot stat 'ds920p.dts': No such file or directory % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 100 2423 100 2423 0 0 3833 0 --:--:-- --:--:-- --:--:-- 3833 Please make sure you are using the latest 1GB img before using backup option Current /home/tc size is 2.5M , try to keep it less than 1GB as it might not fit into your image Should i update the sdb with your current files [Yy/Nn] OK, keeping last status Do you want to restore your own user_config.json from old directory ? [Yy/Nn] y Before changing user_config.json { "extra_cmdline": { "pid": "0xa4a5", "vid": "0x0525", "sn": "1230LWN009033", "mac1": "0011322A46E7", "SataPortMap": "58", "DiskIdxMap": "0A00" }, "synoinfo": { "internalportcfg" : "0xffff", "maxdisks" : "16", "support_bde_internal_10g" : "no", "support_disk_compatibility" : "no", "support_memory_compatibility" : "no" }, "ramdisk_copy": { } } Serial Number for Model : 1860PDN021237 Mac Address for Model DS918+ : 00:11:32:CB:B9:22 Should i update the user_config.json with these values ? [Yy/Nn] Found Kingston DT SerialNumber: 001CC0EC34D1BC31F63A02A0 Vendor ID : 0x0951 Product ID : 0x1642 Should i update the user_config.json with these values ? [Yy/Nn] HBA: 00:12.0 Disks : 2 HBA: 00:13.2 Disks : 2 SataPortMap=22 DiskIdxMap=0002 Should i update the user_config.json with these values ? [Yy/Nn] DSM PAT file pre-downloading in progress... https://global.download.synology.com/download/DSM/release/7.1/42661-1/DSM_DS918+_42661.pat % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 3322 100 3322 0 0 1753 0 0:00:01 0:00:01 --:--:-- 1752 Loader Building in progress... Rploader Version : 0.7.0.7 Loader source : https://github.com/pocopico/redpill-load.git Loader Branch : develop Redpill module source : https://github.com/RedPill-TTG/redpill-lkm.git : Redpill module branch : master Extensions : redpill-misc Extensions URL : "https://github.com/pocopico/redpill-load/raw/master/redpill-misc/rpext-index.json" TOOLKIT_URL : https://sourceforge.net/projects/dsgpl/files/toolkit/DSM7.0/ds.apollolake-7.0.dev.txz/download TOOLKIT_SHA : d349fa644392d4cfab8191243ee38aaa32bd517208c144678e0c855cb5a619ea SYNOKERNEL_URL : https://sourceforge.net/projects/dsgpl/files/Synology NAS GPL Source/25426branch/apollolake-source/linux-4.4.x.txz/download SYNOKERNEL_SHA : af815ee065775d2e569fd7176e25c8ba7ee17a03361557975c8e5a4b64230c5b COMPILE_METHOD : toolkit_dev TARGET_PLATFORM : apollolake TARGET_VERSION : 7.1.0 TARGET_REVISION : 42661 REDPILL_LKM_MAKE_TARGET : test-v7 KERNEL_MAJOR : 4 MODULE_ALIAS_FILE : modules.alias.4.json SYNOMODEL : ds918p_42661 MODEL : DS918+ Local Cache Folder : /mnt/sdb3/auxfiles DATE Internet : 04052022 Local : 04052022 Checking Internet Access -> OK Checking if a newer version exists on the repo -> Version is current Cloning into 'redpill-lkm'... remote: Enumerating objects: 1051, done. remote: Counting objects: 100% (251/251), done. remote: Compressing objects: 100% (34/34), done. remote: Total 1051 (delta 234), reused 217 (delta 217), pack-reused 800 Receiving objects: 100% (1051/1051), 441.74 KiB | 1.08 MiB/s, done. Resolving deltas: 100% (727/727), done. Cloning into 'redpill-load'... remote: Enumerating objects: 1720, done. remote: Counting objects: 100% (5/5), done. remote: Compressing objects: 100% (5/5), done. remote: Total 1720 (delta 0), reused 2 (delta 0), pack-reused 1715 Receiving objects: 100% (1720/1720), 28.45 MiB | 13.78 MiB/s, done. Resolving deltas: 100% (819/819), done. No extra build option specified, using default <static> Using static compiled redpill extension Removing any old redpill.ko modules Looking for redpill for : ds918p_42661 Getting file https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill/releases/redpill-4.4.180plus.tgz Extracting module Got redpill-linux-v4.4.180+.ko Testing modules.alias.4.json -> File OK ------------------------------------------------------------------------------------------------ It looks that you will need the following modules : Found VGA Controller : pciid 8086d00005a84 Required Extension : i915 Searching for matching extension for i915 Found SATA Controller : pciid 8086d00005ae3 Required Extension : ahci Searching for matching extension for ahci Found SATA Controller : pciid 1b21d00000612 Required Extension : ahci Searching for matching extension for ahci [#] Checking runtime for required tools... [OK] [#] Adding new extension from https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json... [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json to /home/tc/redpill-load/custom/extensions/_new_ext_index.tmp_json ######################################################################## 100.0% [OK] [#] ========================================== pocopico.r8169 ========================================== [#] Extension name: r8169 [#] Description: Adds RealTek RTL-8169 Gigabit Ethernet driver Support [#] To get help visit: <todo> [#] Extension preparer/packer: https://github.com/pocopico/rp-ext/tree/main/r8169 [#] Software author: https://github.com/pocopico [#] Update URL: https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json [#] Platforms supported: ds1621p_42218 ds918p_41890 dva3221_42661 ds3617xs_42621 ds3617xs_42218 ds920p_42661 ds918p_42661 ds1621p_42661 ds918p_25556 dva3221_42218 ds3615xs_42661 ds3622xsp_42661 ds3622xsp_42218 dva3221_42621 ds3615xs_41222 ds918p_42621 ds3617xs_42661 ds3615xs_25556 ds920p_42218 ds920p_42621 ds918p_42218 ds1621p_42621 ds3615xs_42621 ds3615xs_42218 ds3622xsp_42621 [#] ======================================================================================= Found Ethernet Interface : pciid 10ecd00008161 Required Extension : r8169 Searching for matching extension for r8169 Found matching extension : "https://raw.githubusercontent.com/pocopico/rp-ext/master/r8169/rpext-index.json" ------------------------------------------------------------------------------------------------ Starting loader creation Found tinycore cache folder, linking to home/tc/custom-module Checking user_config.json : Done Entering redpill-load directory Removing bundled exts directories Cache directory OK Found build request for revision greater than 42218 Getting required extraction tool ------------------------------------------------------------------ Checking tinycore cache folder Found tinycore cache folder, linking to home/tc/custom-module Creating temp folder /tmp/synoesp % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 345M 100 345M 0 0 66.5M 0 0:00:05 0:00:05 --:--:-- 68.4M Entering synoesp extract rd.gz finish cpio: dev/console: Cannot mknod: Operation not permitted cpio: dev/net/tun: Cannot mknod: Operation not permitted 42506 blocks extract rd mkdir: cannot create directory '/mnt/sdb3/auxfiles': File exists Copying required files to local cache folder for future use Copying usr/lib/libcurl.so.4 to /mnt/sdb3/auxfiles Copying usr/lib/libmbedcrypto.so.5 to /mnt/sdb3/auxfiles Copying usr/lib/libmbedtls.so.13 to /mnt/sdb3/auxfiles Copying usr/lib/libmbedx509.so.1 to /mnt/sdb3/auxfiles Copying usr/lib/libmsgpackc.so.2 to /mnt/sdb3/auxfiles Copying usr/lib/libsodium.so to /mnt/sdb3/auxfiles Copying usr/lib/libsynocodesign-ng-virtual-junior-wins.so.7 to /mnt/sdb3/auxfiles Copying usr/syno/bin/scemd to /mnt/sdb3/auxfiles Copying required libraries to local lib directory Linking lib to lib64 Copying executable Removing temp folder /tmp/synoesp Checking if tools is accessible /bin/syno_extract_system_patch: /usr/local/lib/libcurl.so.4: no version information available (required by /bin/syno_extract_system_patch) Copyright (c) 2003-2021 Synology Inc. All rights reserved. /bin/syno_extract_system_patch PATCH_PATH DEST_PATH Executed succesfully Creating temp folder /tmp/pat Checking for cached pat file Found tinycore cache folder, linking to home/tc/custom-module Found locally cached pat file /home/tc/custom-module/ds918p_42661.pat Could not determine if file /home/tc/custom-module/ds918p_42661.pat is encrypted or not, maybe corrupted -rwxrwxrwx 1 root root 3322 May 4 06:11 /home/tc/custom-module/ds918p_42661.pat 041 Backup in progress... Clearing local redpill files Please make sure you are using the latest 1GB img before using backup option Current /home/tc size is 2.3M , try to keep it less than 1GB as it might not fit into your image Should i update the sdb with your current files [Yy/Nn] Backing up home files to sdb : Backing up files to /mnt/sdb3//mydata.tgz Done. tc@box:~$ ls custom_config.json ds920p.dts global_config.json modules.alias.3.json my.sh rpext-index.json user_config.json ds1621p.dts dtc m.sh modules.alias.4.json my.sh.gz rploader.sh tc@box:~$ ls -la total 2240 drwxr-s--- 6 tc staff 580 May 4 06:12 ./ drwxrwxr-x 3 root staff 60 Nov 25 19:27 ../ drwxr-s--- 2 tc staff 40 Nov 25 19:27 .X.d/ -rw------- 1 tc staff 48 May 4 05:47 .Xauthority -rwxr-xr-x 1 tc staff 275 Nov 25 19:27 .Xdefaults -rw-rw-r-- 1 tc staff 117 May 4 06:15 .ash_history -rw-r--r-- 1 tc staff 424 Feb 13 2021 .ashrc -rw-r--r-- 1 tc staff 45 Nov 25 20:15 .bashrc -rwxr-xr-x 1 root staff 2590 Jan 5 09:50 .dialogrc drwxr-sr-x 3 tc staff 60 Nov 25 19:27 .fltk/ drwxr-s--- 3 tc staff 60 Nov 25 19:27 .local/ -rw-r--r-- 1 tc staff 937 Nov 28 21:43 .profile -rwxr-xr-x 1 tc staff 103 Nov 25 19:27 .setbackground lrwxrwxrwx 1 root staff 20 May 4 05:47 .wbar -> /usr/local/tce.icons drwxr-sr-x 4 tc staff 80 May 4 05:47 .wmx/ -rwx------ 1 tc staff 550 Nov 25 19:27 .xsession -rw-r--r-- 1 tc staff 33840 May 4 06:11 custom_config.json -rw-r--r-- 1 tc staff 3026 May 4 06:11 ds1621p.dts -rw-r--r-- 1 tc staff 2423 May 4 06:11 ds920p.dts -rw-r--r-- 1 tc staff 150200 May 4 06:11 dtc -rw-r--r-- 1 tc staff 5692 May 4 06:11 global_config.json -rwxr-xr-x 1 tc staff 13161 Apr 30 10:13 m.sh -rw-r--r-- 1 tc staff 81845 May 4 06:11 modules.alias.3.json -rw-r--r-- 1 tc staff 1628600 May 4 06:11 modules.alias.4.json -rwxr-xr-x 1 tc staff 13457 Apr 30 10:13 my.sh -rw-r--r-- 1 tc staff 3001 May 4 06:10 my.sh.gz -rw-r--r-- 1 tc staff 216702 May 4 06:11 rpext-index.json -rwx------ 1 tc staff 78809 May 4 06:11 rploader.sh -rw-r--r-- 1 tc staff 431 May 4 06:11 user_config.json tc@box:~$ pwd
  5. Sorry. can you check if i do correct steps? ./rploader.sh update now ./rploader.sh fullupgrade now ./rploader.sh serialgen DS918+ now ./rploader.sh satamap now ./rploader.sh identifyusb now ./rploader.sh build apollolake-7.0.1-42218 ./rploader.sh clean now vi /home/tc/ds920p.dts (edit my sata config) ./rploader.sh build apollolake-7.1.0-42661 ./rploader.sh clean now; rm -rf /mnt/sdb3/auxfiles; rm -rf /home/tc/custom-module; ./rploader.sh backup now; sudo reboot Is this procedire right? Can you please reply this question? I must erase that config? Because always match the pcie_root nic adress with this esata port during the auto-detection process Kind Regards.
  6. Hope that will help DiskStation> cat /var/log/junior_reason Exit on error [7] root not matched with junior... DiskStation> cat /var/log/*rc* START /linuxrc.syno.impl Insert basic USB modules... :: Loading module usb-common ... [ OK ] :: Loading module usbcore ... [ OK ] :: Loading module xhci-hcd ... [ OK ] :: Loading module xhci-pci ... [ OK ] :: Loading module usb-storage ... [ OK ] :: Loading kernel modules from extensions ... Loading kmod #0 "mii.ko" for pocopico.r8169 (args: ) Loading kmod #1 "r8169.ko" for pocopico.r8169 (args: ) :: Loading kernel modules from extensions ... [ OK ] :: Executing "on_boot" custom scripts ... Running "check-r8169.sh" for pocopico.r8169->on_boot Loading module r8169 -> Module r8169 loaded succesfully Ran "check-r8169.sh" for pocopico.r8169->on_boot - exit=0 Running "boot-wait.sh" for redpill-boot-wait->on_boot Still waiting for boot device (waited 1 of 30 seconds) Still waiting for boot device (waited 2 of 30 seconds) Still waiting for boot device (waited 3 of 30 seconds) Still waiting for boot device (waited 4 of 30 seconds) Still waiting for boot device (waited 5 of 30 seconds) Still waiting for boot device (waited 6 of 30 seconds) Still waiting for boot device (waited 7 of 30 seconds) Still waiting for boot device (waited 8 of 30 seconds) Still waiting for boot device (waited 9 of 30 seconds) Still waiting for boot device (waited 10 of 30 seconds) Still waiting for boot device (waited 11 of 30 seconds) Still waiting for boot device (waited 12 of 30 seconds) Still waiting for boot device (waited 13 of 30 seconds) Still waiting for boot device (waited 14 of 30 seconds) Still waiting for boot device (waited 15 of 30 seconds) Still waiting for boot device (waited 16 of 30 seconds) Still waiting for boot device (waited 17 of 30 seconds) Still waiting for boot device (waited 18 of 30 seconds) Still waiting for boot device (waited 19 of 30 seconds) Still waiting for boot device (waited 20 of 30 seconds) Still waiting for boot device (waited 21 of 30 seconds) Confirmed a valid-looking /dev/synoboot device Ran "boot-wait.sh" for redpill-boot-wait->on_boot - exit=0 Running "install_rd.sh" for redpill-misc->on_boot Starting ttyd, listening on port: 7681 Ran "install_rd.sh" for redpill-misc->on_boot - exit=0 :: Executing "on_boot" custom scripts ... [ OK ] Extensions processed Insert net driver(Mindspeed only)... Starting /usr/syno/bin/synocfgen... /usr/syno/bin/synocfgen returns 0 Insert synorbd kernel module Insert synofsbd kernel module Insert sha256 kernel module Assemble args: -u 5361bf9c:5e47119b:3017a5a8:c86610be /dev/sda1 mdadm: /dev/md0 has been started with 1 drive (out of 16). Partition Version=9 /sbin/e2fsck exists, checking /dev/md0... e2fsck 1.44.1 (24-Mar-2018) /sbin/e2fsck -yvf returns 0 Mounting /dev/md0 /tmpRoot ------------upgrade Begin upgrade procedure Failed to found any patch No upgrade file found ============upgrade ------------bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/VERSION:buildnumber -> 42661 value2: /tmpRoot/etc.defaults/VERSION:buildnumber => 42621 Skip bootup smallupdate, because root is not matched to junior ============bootup-smallupdate Failed to AssertFileKeyValueEqual value1: /etc.defaults/VERSION:buildnumber -> 42661 value2: /tmpRoot/etc.defaults/VERSION:buildnumber => 42621 Exit on error [7] root not matched with junior... Tue May 3 14:19:21 UTC 2022 /dev/md0 /tmpRoot ext4 rw,relatime,prjquota,rootprjquota,data=ordered 0 0 none /sys/kernel/debug debugfs rw,relatime 0 0 Other question, during installation, when i edit vi /home/tc/ds920p.dts before make the ./rploader.sh build apollolake-7.1.0-42661 command, I must erase that config? Because always match the pcie_root nic adress with this esata port during the auto-detection process
  7. I'll do it. You know if 918+ takes same time as 920+? Normally i have the NAS shuwdown and i use a WOL. For me the less time to boot is better. I supose that the best version for my J4205 with internal graphics is 918+ or 920+ witch supports transcoding Thanks for all and for your support.
  8. With 2 disks, one in each controller 00:12.0 and 00:13.2 You know why it 's too slow to get IP. Normally 10 minutes. The NIC is a Realteck RTL8168B
  9. New info recently discovered. After a new manual installation using this manual --> I get whis info when DMS is installed. Why i have new Marvell Technology Group 4 port SATA, not shown in last capture? I dont wknow whitch one is the good one. 1 controller with 4 SATA ports or 2 controllers with 2 sata ports per controller
  10. Hi Peter Suh, I'm a Asrock J4205 owner. Actually i'm doing tests with J4205 and a spend a looooot of time tryin to make functionally the DSM 7.01 and 7.1.0 I dont'w know why but scripts and images form 918+ and 920+ doesn't work. Problems with SATA detection and DTS config. When config is detected, in DTS apears the onboard NIC Gigabit 13.0 in internal slots. Maybe it's the reason because we loose the IP address during boot. vi /home/tc/redpill-load/ds920p.dts the motherboard has a m2 sata port also, but not have a esata port This motherboard has 2 internal SATA controllers with 2 SATA port per controller = 4 SATA ports
  11. Gracias por responder amocu. Esa información ya me vale. Yo tengo problemas actualmente al arranque. Se queda esperando a F1/F2 al arrancar y es un coñazo. Si arranca normal con esta placa, el WOL funciona casi seguro.
  12. Nadie puede confirmarme si la Q1900 funciona correctamente suspendiendola y arrancandola con normalidad? Mi actual lenovo se queda clavado en el arranque POS
  13. Buenas tardes foreros. Dado que mi pc Lenovo ThinkCentre M58 se queda clavado al arrancar en la BIOS en el esperando F1 o F2... he optado por comprarme próximamente un hardware que veo que recomendáis por aquí: Placa: Asrock Q1900-itx --> http://tienda.lifeinformatica.com/asroc ... 2109-p.htm Memoria: 4Gb DDR3 1600MHz CL11 --> http://tienda.lifeinformatica.com/crucial-1082652-p.htm Caja: Tacens Ixion Mini ITX --> http://tienda.lifeinformatica.com/tacen ... 7379-p.htm Fuente: 300W incluida en la caja Tacens Discos: 2 discos de 1Tb que ya tengo Busco poder tener el NAS apagado cuando no lo uso y despertarlo via WoL. Mi pregunta es si la placa Asrock Q1900-itx es compatible con la suspension y el apagado automático. Recomendáis a parte otra opción? Gracias
×
×
  • Create New...