extenue
-
Posts
70 -
Joined
-
Last visited
Everything posted by extenue
-
Bonsoir ! SVP j'ai besoin d'aide sur mon N54L Avec TC je vois bien tous mes disks (4 + 2) mais j'ai pas de réseau Avec ARC / ARPL j'ai bien du réseau mais je ne vois pas le 5 eme et 6 eme disks. J'utilises les toutes dernieres version dispo ce jour , j'ai testé avec le DS3622xs Meme apres avoir installé tous les modules avec ARC , je ne vois toujours pas les 2 derniers disks Avez vous une idée de ce que je peux tenter ? Merci !
-
all is OK with new 0.9.4.8 , thanks !
-
all is OK with new 0.9.4.8 , thanks !
-
Thanks for the answer , this is also being discussed here now TinyCore RedPill Loader (TCRP) - Page 190 - Loaders - XPEnology Community my last update is now with 0.9.4.8 I can build DS3617 but not DS3622 as I get this : Module does not contain platorm information for ds3622xsp_42962 What is killing me is all was fine on tuesday , same HW , same USB key , so something still broken at repo side. XT
-
I don't understand what you mean with "0.9.4.7 webbuilder supersecret feature which is located at tcrp IP address." I've justed the newly 0.9.4.8 as well as 0.9.4.4 without any update and for both I get the below whereas it did work flawlessly two days ago on executing the EXACT same commands "Looking for redpill for : ds3622xsp_42962 Module does not contain platorm information for ds3622xsp_42962" I am lost EDIT : I think the developer is in panic mode or so .. (joke of course) , I just see a new 0.9.4.8 released 5 min ago EDIT 2 : still same ... please does anyone can explain what's going on ? There is no more errors on the output like earlier today and yesterday but it's still impossible to build a loader I don't know what I can do to help , sorry SYNOMODEL : ds3622xsp_42962 MODEL : DS3622xs+ Local Cache Folder : /mnt/sdf3/auxfiles DATE Internet : 01062023 Local : 01062023 Checking Internet Access -> OK Checking if a newer version exists on the main repo -> Version is current Redpill sources already downloaded, pulling latest Already up to date. Loader sources already downloaded, pulling latest Already up to date. No extra build option or static specified, using default <static> Using static compiled redpill extension Removing any old redpill.ko modules Looking for redpill for : ds3622xsp_42962 Module does not contain platorm information for ds3622xsp_42962 EDIT 3 : this works ./rploader.sh build ds3617xs-7.2.0-64561 but don't work for ds3622xsp_42962
-
I should come back here before posting there ... Redpill broken this week ? - General Installation Questions/Discussions (non-hardware specific) - XPEnology Community Glad I am not the only one ... I saw a lot of activities on the repo , today the same 4.7 version has been uploaded multiple time , yesterday it was branded 4.7 bur filename was still 4.6 I've tried with 0.9.4.5 without update.sh but I got same issues , I bet I need to retry using 0.9.4.0 without update , what is killing me is it works two days ago but not yesterday and it's failing still today with 4.5
-
Hi, I have been successfully to create a loader on my Dell PowerEdge T20 this tuesday on using tinycore-redpill.v0.9.4.0.img which has been updated to very latest release at that time so was 0.9.4.5 or 0.9.4.6 , can't tell. Yesterday , wednesday , I have not been able to do the same on my Proliant N54L and on that same Dell T20 , I got issues with PAT which cannot be downloaded , again with TC up to date "Failed to download PAT file //mnt/sdf3/auxfiles/ds3622xsp_42962.pat from" Today , thursday , I've tried again using 0.9.4.7 , still unsuccessfull on the T20 but this time with another error "Module does not contain platorm information for ds3622xsp_64551" , I don't know what I am missing , something has changed on the TC side , this makes me crazy. I also notice the 0.9.4.7 version has been updated today (same version but not same upload time) , yesterday it was branded 0.9.4.7 but file name was still 0.9.4.6 .. Does anyone has been able to build a loader yesterday or/and today ? Thanks XT
-
Hi There, I can't get the download to work so I never see "INFO: Bootloader has been successfully downloaded from URL." , if I try to put a wrong URL on purpose then I don't see any error message as well I am trying this on a VPS I am renting , I've verified all the pre-reqs. I have nginx installed on the VPS , not sure if I need to uninstall it. Does anyone has an idea so I can pass the bootloader download step ? Thank you & sorry for my english XT EDIT : in other words this is what I always get , i've verified with wget that the URL can be resolved docker run --privileged \ > -e BOOTLOADER_URL="http://localhost/xpen/s.img" \ > uxora/xpenology INFO: Start downloading bootloader from URL ... I've verified Docker is running fine docker run hello-world Hello from Docker! This message shows that your installation appears to be working correctly.
-
Thank you very much !!! I have broken my Xpenology VM once upgraded Debian 9 to 10 & PVE 5 to 6 , I've bookmarked this thread few months ago but patch did not work anymore but it's now OK again thanks to your post clap clap XT
-
"To run the 6.2 version you need to add a new network card as the internal NIC is no longer supported' My N54L is already running 6.2 , did you meant "To run the 6.2.2 version you need to add a new network card as the internal NIC is no longer supported" ? Thanks XT
-
Hi Everyone, I run two instances of DSM , one as a VM in Proxmox (DS3617xs) , another as BareMetal on Proliant N54L (DS3615xs), both are running DSM 6.2-23739 Update 2. I need to upgrade to newer version as Let's Encrypt is not supported anymore. Is anyone can confirm ability to upgrade any of those two systems ? and if yes , is NIC was still OK or something for that was necessary ? Thanks ! XT
-
thanks Jun no luck on Proxmox VM , nothing is found by ds assistant even on booting on esx
-
no one is using webdav , no one has an issue or no one want to reply ? i am just looking to know if webdav is working fo you ...
-
no one is using webdav , no one has an issue or no one want to reply ? i am just looking to know if webdav is working fo you ...
-
Good Evening, for those still on DSM 6.0.2 , have you got webdav working ? i am not able to have it to work on my two instances of 6.0.2 whereas it works fine on xpenoboot i made some research which point me to native DSM 6 where they say to fix permissions which i did on jun 6.0.2 but no luck If anyone can share some information then this would be very appreciated thanks XT
-
EDIT : solved on using private browsing , so root cause should be cookie EDIT 2 : this issue does not happen with reverse proxy
-
EDIT : solved on using private browsing , so root cause should be cookie
-
Hi there i run two XPen 6.0.2 Jun loader update 9 VMs on Proxmox without any problem , for one of them , i mounted synoboot.img then modified the config file to update both SN & MAC Address to avoid conflict : both VMs are seen as distinct with DS Assistant from a third VM However i met this issue : i log on first VM then as soon as i log on second VM then i am automatically logged of the first one and vice versa is someone else have same problem ? any ideas on how to solve this ? Thanks XT
-
Thanks Marigo , with this sentence you pointed me on good direction , i installed pfSense as a VM which served as a DHCP server and then i could install Xpenology What i did not tell is i rent a dedicated server on which i installed Proxmox and i struggled a lot to get Xpen to work
-
Ola Marigo Can you expand a little bit please the details of your VM ? i have hard time trying to achieve a Xpen VM in proxmox , i did what you said but it does not work , i can boot the VM , i choosed the last entry then i can see "booting the kernel." then nothing else , i expect to see more (i already run Xpen on BareMetal and on ESX) , i have another VM (NAT mode) and i can't find anything wth Synology Assistant Any help regarding Xpen on Proxmox would be really much appreciated Thanks XT
-
double post to be deleted sorry
-
no need to wait ! OneDrive Hubic and Box came up with DSM 5 update 7 tested & approved
-
update OK from Hyper-V with update 5 , even no need to reboot update OK from native Proliant N54L with update 4 : need to reboot 3 times (so i got same issue when i did the upgrade from update 4 to update 5) as volumes were unmounted i lost permissions and folders set on the backup function but the best for the end !! apparition of Box , Hubic , OneDrive on Cloud Sync !! alleluiaaaaa no need to wait for DSM 5.1 , tested all of them and works like a charm , that makes my day
-
I got same as you (proliant n54l) what i did is downgrade to 4493 using original pat with nanoboot boot menu so i came back to 4493 "update 0" now i will upgrade to update 4 using pat found on xpenology.nl
-
Trial of Nanoboot (4493) - 5.0.3.1
extenue replied to vtrchan's topic in DSM 5.2 and earlier (Legacy)
great ! thanks