Jump to content
XPEnology Community


  • Posts

  • Joined

  • Last visited

Everything posted by sanity

  1. Excellent... Any chance of an upload somewhere?
  2. Hi, I have the same problem here with an LSI Raid 9840 MegaRaid card.... put the card in and it fails to boot and just shuts down. Did you get anywhere with this issue? - thanks.
  3. Hi Odie, I have an LSI MegaRaid 9280 adaptor that I'd really like to use - could you possibly look at including the latest drivers for this type of card and maybe others too? Sorry, not sure how much work it would be?
  4. That's great - thanks... look forward to the new build... Mine are seen, they're just not 'compatible' yet..... Any idea if it's possible to add OCZ Revo 3 / Revo 3 X2 drivers to the build to be seen as normal discs only?
  5. Had a quick look at hex editing... trialed on VBOX image only as getting late.... Seems a quick change (only for the last number in the serial) that works with the check sum is that the number after the serial number needs to be 1 higher. e.g. if your serial is B3J4N00000 then the version in the file will need to be B3J4N000001 So, if you want your serial to be B3J4N00008 then the version in the file needs to be B3J4N000089 ...not tried editing the IMG file yet, but assume the same will work.....
  6. That's great - many thanks.... Have added a few more SSD product codes to your other post request.... Any chance you could add the Intel C600 series chipset to your next build too and may be a few more common NIC drivers too - that would be fantastic! Thanks again, San.
  7. Hi, A few more SSD product codes to add please? [sSDSA2SH032G1GN] brand="Intel" size="30GB" [MKNSSDCR240GB-DX] brand="Mushkin" size="240GB" [OCZ-VERTEX2] brand="OCZ" size="60GB" [OCZ-VERTEX4] brand="OCZ" size="120GB" Thanks, San.
  8. odie, what version of xpenology DSM is that - I don't have that tab on mine?
  9. Hi, Does anyone know if SSD Caching can be enabled for this version of the firmware, or is that only available in the xs+ versions? Is it easy to add? Many thanks,
  10. Thanks Andy. Have tried updating the previous vbox installation from Control Panel->DSM Update and selecting the new PAT file, but get an "Unknown error occurs (Error No:21)" error. Assume it only works on a new install, is that correct?
  11. sanity


    Yes agree, support for LSI adaptors would be most welcome!
  12. No, works fine, as long as your NIC is supported.
  13. Do you think it's possible to change the Serial after install somewhere as to avoid conflicts as multiple versions show the same?
  14. Hi Andy, More tests for you. Just installed fine to a Asus E35M1I Mini-ITX AMD ( http://www.asus.com/Motherboards/AMD_CP ... rd/E35M1I/ ) All fine and working SATAs and NIC. After firmware installed. I can then install a 10Gb Intel x520 T2 network card. Picks up fine and can now get fantastic transfer speeds. San.
  15. Hi, Tried XPEnology yesterday. Very well done. All good on VBOX. Tested on two MB's to see if the assistant can see it on the LAN before install, results as follows.... Gigabyte GA-X79S-UP5 - Built in 1GB Intel LAN : OK - Intel X520-T2 10GB Card : Fail ASRock Z77 Extreme 6 - Built in LAN : Fail - Intel X520-T2 10GB Card : Fail - 3Com 3C1000BT Card : Fail - Realtek 8139D Card : fail Any idea about the built in LAN for the Z77 board above? Also what 10GB network cards would work with the XPEnology? Could you get it to work with the Intels above, is it a fairly easy task? Happy to donate if get it working! Kind Regards, and great work. Much appreciated!
  • Create New...