GatekeeperZA
-
Posts
61 -
Joined
-
Last visited
Posts posted by GatekeeperZA
-
-
scroll down the page you linked to on overclock.net, there is flashing details there, plus google of course
yes but wanted to know if that's for the correct card..?
-
http://www.ebay.com/itm/230990887722?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Works like a charm and it supports 3TB Hd the one your looking at doesn't
Problem is :
Price : US $35.00 Approximately ZAR 533.29 <--- which is fine
Shipping to south africa : $60.00 (approx. ZAR 914.22) <--- which is insane.
would rather try flash the ones i have.
-
Thanks. would you be able to provide more info on how to do this as I have not used a raid card before
1. how do I use the IT mode <--- this will figure out
2. What firmware would I have to flash to it if you could provide a link would be much appreciated. .. ? <--- well this is the main question..
Please see attached link to the pic of the card : https://drive.google.com/file/d/0B9duGC ... sp=sharing
The chipset seem to be : LSISAS1068 BO
Thanks for the advice.
-
Hey guys wanted to find out if this card is compatible with xpenology
Dell : CN-0MX961-13740 Perc 5/I
http://www.overclock.net/t/359025/perc- ... benchmarks
also would like to find out how many drives this controller would support.
if anyone is running these cards please advise on how your install went and any issues.
I'm planning my latest build with 2x of these just want to get my facts straight.
Please advise.
Thanks again.
-
Appologies. my issue is on the 5.2 but same issue. shares not showing up in windows.
I cannot map get an access denied error. even as admin
ive tried to flushdns, manual, static and dhcp leases workgroup is correct.
although it sometimes does allow me to use \\192.x.x.x to access the shares. sometimes via hostname \\server
any ideas would be helpful its good to know the issue persists from 5.1 - 5.2 though
-
Im having the same issues with 4 xpeno baremetals.
-
Im still sitting with the issues of shr expanding. on 5.1 -5022 update 2 had to force reboot as there was nothing going on with the storage manager. 0.00%
any one have any thoughts that will help. I am currently running the test img supplied with still no luck...
-
Ive been running xpenology for 2 years no no failures no issues HP microserver N54L and N45L
-
Well said Schnapps.
+1
-
ok so it wont "turn off the system" it will stay on but unmount and stop services ..? is that correct .. ?
-
Ok please can someone help. I noticed something strange. When the power fails and my ups kicks in my system does not shut down.
is this normal and if so how do I enable it to shutdown when running on ups... ?
This happens on all 3 my microservers 2 on different ups'es
any clarity or workaround would be great.
-
Thanks for the heads up. im downgrading my test rig now to check will confirm later.
is so maybe it works on the minor updates will check on major updates as well.
-
Ok please can someone help. I noticed something strange. When the power fails and my ups kicks in my system does not shut down.
is this normal and if so how do I enable it to shutdown when running on ups... ?
This happens on all 3 my microservers 2 on different ups'es
Please help as power in my area is not great...
-
Sorry for the stupid question. how do I/We know if the drive hibernation works or not
If so can someone kindly help me and explain how to enable it.. ?
-
how do you know if your system has been compromised.. ?
-
I did the update from 4493 to update 1 directly from the syno interface without ssh command
It's a new feature of nanoboot ? It's cool
So you're telling me we can just use the update in the control panel now... ?
-
please explain steps to upgrade to 4493 with GnoBoot please.
When I try and update my bootloader form GnoBoot to NanoBoot my homes directories become inaccessible as well as my system crashes.
Is there any way around this, or am i doing something wrong that has caused this, does/has anyone had this issue and how do i overcome.
I have been forced to switch back to GnoBoot...
Please help guys.
-
please explain steps to upgrade to 4493 with GnoBoot please.
-
did u select gnoboot.me when doing the install.
Please post exact steps and versions..
-
I had the same issue when I ran nanoboot.
reveted back to gnoboot and all worked again, did not know what causes it though.
-
Confirmed 1 Server working 100% with WOL
now, the second server has 2 nics running LACP has anyone tried WOL with a bonded nics... ?
-
HP microserver onboard Broadcom
-
I have not checked, am having some issues with nanoboot prefer staying with gno it just works.
-
I 've tried the 86 image to download, but doesn't work, server error.
Confirmed. WOL does not work on x86 or x64, N54L and N40L
Raid Card Help : Info
in Archives
Posted
Update all can be found at : so if anyone else is struggling to find the downloads
http://www.outfoxed.net/perc5i/