Nofear87

Members
  • Content count

    13
  • Joined

  • Last visited

Community Reputation

0 Neutral

About Nofear87

  • Rank
    Newbie
  1. Hi, i got it to work finally, but with DSM 6,2 instead, does anyone know what i will have to do to get quickconnect work?
  2. Hi, What build should i use for my HP Proliant ML150 G9 with E5-2609v3? what one should i use ds3615xs, ds3617xs or ds916+? Is my NIC supported or do i have to use extention drivers? my NIC is: Broadcom 5717 Dual-port 1Gb. I also have a Raid card: IBM ServeRAID M5016 Controller Raid SAS/SATA PCIe 6GB 1G cache =LSI 9265-8i Is that raid card supported? Can't get the update to dsm 6 to work, had no problems with dsm 5,2 baremetal
  3. Nofear87

    DSM 6 does not use all cores?

    Anyone?
  4. Nofear87

    DSM 6 does not use all cores?

    Hi, I have tried to add screenshot of the info i got of when i run the commands, but can't attach the due to attachment quota. But maybe you can show me what info you got on your CPU when you run the command? But to wrote down the info i get on the CPU see below: processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 63 model name : Intel® Xeon® CPU E5-2609 v3 @ 1.90GHz stepping : 2 microcode : 0x35 cpu MHz : 1897.832 cache size : 15360 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 15 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdt scp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc ap erfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm arat epb xsaveopt pln pts dtherm tpr_shadow v nmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid bogomips : 3795.66 clflush size : 64 cache_alignment : 64 address sizes : 46 bits physical, 48 bits virtual power management:
  5. Nofear87

    DSM 6 does not use all cores?

    Yes, I'm on bare metal too , Ok, that's great, yeah i have had problem with transcoding when i use subtitels in Plex since update to DSM 6, so that is why i checked the cores. I did not have that problem when running DSM 5.2.
  6. Nofear87

    DSM 6 does not use all cores?

    What i understod the limit should be 8 cores for DSM? But i can only see 1 Core in total, but the CPU has 6 Cores. I have searched the forum but can't find anyone that has this problem? See screenshot when i run cat /proc/cpuinfo.
  7. Nofear87

    DSM 6 does not use all cores?

    Hi, I have a HP ML150 gen9 with a Xeon E5-2609v3 running DSM on Jun's loader 1.01. But when i run cat /proc/cpuinfo it only shows cpucores:1 but it should be 6 cores. Any Idea's? Thanks for your help
  8. Nofear87

    DVB Driver Requests / Issues

    Is there possible to use TBS 6982 S2 and TBS 6281 T2? How to i get it to work? Can i use Tvheadend plugin or should i use Debian Choot?
  9. Nofear87

    LSI MegaRAID Storage Manager or SMIS Provider Support

    I have a IBM 5016 (Same as LSI 9265) that i passtrough from ESXI with JBOD activated on the card. It seems to work well, but the smart status and temp is not showing. I found this link about how to activate JBOD, maybe it will work for you: https://forums.servethehome.com/index.p ... ware.1827/ Maybe this will help you, it helped me to get the card work in Xpenology.
  10. Nofear87

    IBM ServeRAID M5110 compatibility

    I have a IBM 5016 (Same as LSI 9265) that i passtrough from ESXI with JBOD activated on the card. It seems to work well, but the smart status and temp is not showing. I found this link about how to activate JBOD, maybe it will work for you: https://forums.servethehome.com/index.p ... ware.1827/
  11. I have a IBM 5016 (Same as LSI 9265) that i passtrough from ESXI with JBOD activated on the card. It seems to work well, but the smart status and temp is not showing. I found this link about how to activate JBOD, maybe it will work for you: https://forums.servethehome.com/index.p ... ware.1827/ It seems like you can only get SMART status if you use a card compatilbe with IT mode, but then you will lose the cache on the card and just use it as a dumb passtrough device. Has anyone come up with a solution for this yet?
  12. Nofear87

    LSI MegaRAID Storage Manager or SMIS Provider Support

    Hi, Did you got your M5015 to work with Xpenology?
  13. Nofear87

    IBM ServeRaid M5016

    Hi, How do i get IBM ServeRaid M5016 to work with Xpenology? I'm using Passtrough for the card from exi 6 to Xpenology. Do i need to crossflash the card? Best regards, Mattias