ordimans

A automatic plateform has been installed on this email : syn0_serial@protonmail.ch Please ask your serial here. Donate on BTC address are welcome.

Thanks you. It was that... No problem in the past... Go to trash

At guys who use this loader on N40L or N54L, what network speed you have for NIC integrated ?? I have 100Mbps....

I should do that, i should can keep push notification enable

Until 6.02 with respect loader, it doesn't work... Don't know what Khile's done but everything works!!

Quickconnect is not required before, and push notification worked.

You are right. But i think it's same method, just need to find driver compiled for this kernel. But i don't know why, but loader 1.01 with 6.02 my UPS doesn't work on USB of N40L. Now with the new loader custom for AMD (1.02b) it's working...

Since what version ? In 6.0.2, i could enable Push notifications, with a serial from generator, and any MAC. Now it's not possible.. Sinology change something ?

Update 1 released. Who try ?

I am with N40L, and i tested with my APC, it worked. (but didn't work on 6.02 with 1.01 loader...) Wait, i will found the topic. EDIT : It was this: OHCI support (#4) https://xpenology.com/forum/topic/418-kernel-hijack/

I have a problem with package center, it's impossible to get the list.... Cannot install package. Don't know why,.... Synology forum are in timeout.... Try others DNS (google or opendns) it's same... IP blacklisted ?!?!?

Yes of course. You need custom bios for N40L/N54L , to have this menu : Chipset >> Southbrigde configuration >> SB SATA Configuration Sata IDE Combined Mode ==> DISABLED Sata ESP on all port ==> Enabled Source : https://homeservershow.com/forums/topic/3397-modified-bios-for-microserver-n40l-enables-hidden-features/

New problem, cannot install package. The loading is infinite... EDIT:

Fixed for eSata. Just need to change setting in bios. (in Southbrigde configuration).

eSata port tested. Doesn't work. Like internal Sata.

Hum. Not sure if it worked with 1.01 loader and 6.0.2... I need to check... How can i be sure what is exactly the chipset use ? It's N40L. EDIT : Last thing, about MTU 9000, it's a problem with RTL8111B, 7200 is the max... I UPGRADED with success. Click on update by DSM and choose force reinstall during the reboot. I choose install last version during assistant : It's worked :

Did you change PID/VID in grub.cfg ? No for myself... and it worked in force mode. Some problem for me with hardware support : -Cannot switch to MTU 9000 on RTL8111 added. -additional Sata on Motherboard are not supported ??? (eSata port not tested) EDIT: -UPS support is OK, APC is connected :

Tested on N40L. Disabled C1E support in bios. (What is exactly ? ) find.synology.com >> not found DSM. Synology Assistant, found it !! Installation in progress for 15047. Next update it's OK. It's possible to use 3617xs in change the grub.cfg ?? SSD on Sata port is not detected...

Not sure to understand. @khile : You compile yourself a new kernel with AMD support ? And use the loader 1.02b ? (or 1.02a ?) I believe jun fix a bug in last version, during the migration. I will test on my N40L.

The other solution is to add driver of USB1.1 compatiblity in N54L. During the 4.3 time, it was already necessary...

Kernel config give the choice of AMD support. (until 3.10.77, don't know for .102, but i think it's same). We can compil the kernel with what we want... But i believe, before the kernel was with bromolow and now it's with broadwell architecture. These screens are from bromolow source : Not sure, but i think jun doesn't support all and keep the default config. The kernel file will be bigger, if we include everything.... And the default config from Synology machine support less hardware than before, you are right on this.... Same for modules... I have some USB device which worked in 4.3 and no in 6.02.... I am trying to compil my own kernel, but it's not easy.... If you can have debug on serial with your AMD machine, you will see nothing... You can be sure, it's not just a problem with network driver, but with entire architecture... But no serial on the N40L or N54L... Maybe the solution can be add PCI card on it... Because on my VM , i cannot virtualize AMD machine... Maybe can do on ESXI... But it's not same, because last loader works on ESXI...

OK i will try. I have debug log in serial, and it's very helpful !! The readme, doesn't help me of this script

Good idea !! Just don't know if i must reuse the menuentry for AMD which was comment. It use bzImage and no zImage. ANd not sure if it's ok, because it seems to there is a crc checksum in a file...

I am working on my own kernel, to support AMD cpu. I compiled kernel with AMD support. But some difficulties to generate the boot image after with https://github.com/kref/scripts