herbyesk

This is the log /var/run/dmesg.boot When i read the log correct my ssd (system HDD) will be mount as SDB and not as SDA. I think this is a problem or ? [ 0.000000] Linux version 3.2.11 (root@debian) (gcc version 4.2.0) #4 SMP Sat Jul 6 17:38:11 CEST 2013 [ 0.000000] Command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs mac1=00113208d62a mac2=00113208d62b mac3=0011060b0033 mac4=0011060b0034 sn=B5JDN00000 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d000 (usable) [ 0.000000] BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ec3c000 (usable) [ 0.000000] BIOS-e820: 000000006ec3c000 - 000000006ec90000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ec90000 - 000000006ecb1000 (reserved) [ 0.000000] BIOS-e820: 000000006ecb1000 - 000000006ecc2000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ecc2000 - 000000006ecd8000 (reserved) [ 0.000000] BIOS-e820: 000000006ecd8000 - 000000006ecd9000 (usable) [ 0.000000] BIOS-e820: 000000006ecd9000 - 000000006ecda000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ecda000 - 000000006ecdd000 (reserved) [ 0.000000] BIOS-e820: 000000006ecdd000 - 000000006ece4000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ece4000 - 000000006ed48000 (reserved) [ 0.000000] BIOS-e820: 000000006ed48000 - 000000006ed8b000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ed8b000 - 000000006ef00000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved) [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/E45M1-M PRO, BIOS 1202 08/07/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x6ef00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-D0FFF write-protect [ 0.000000] D1000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 06EF00000 mask FFFF00000 uncachable [ 0.000000] 2 base 06F000000 mask FFF000000 uncachable [ 0.000000] 3 base 070000000 mask FF0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] found SMP MP-table at [ffff8800000fce20] fce20 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-000000006ef00000 [ 0.000000] 0000000000 - 0040000000 page 1G [ 0.000000] 0040000000 - 006ee00000 page 2M [ 0.000000] 006ee00000 - 006ef00000 page 4k [ 0.000000] kernel direct mapping tables up to 6ef00000 @ 1fffd000-20000000 [ 0.000000] RAMDISK: 6e691000 - 6ec2c000 [ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 000000006ec85068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 000000006ec8b2e8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 000000006ec85150 06192 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 000000006ece3f80 00040 [ 0.000000] ACPI: APIC 000000006ec8b3e0 00062 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 000000006ec8b448 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 000000006ec8b488 00038 (v01 ALASKA A M I 01072009 AMI 00000004) [ 0.000000] ACPI: SSDT 000000006ec8b4c0 003DE (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 000000006ec8b8a0 0168E (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006c200000-ffff88006dbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0006ec3c [ 0.000000] 0: 0x0006ecd8 -> 0x0006ecd9 [ 0.000000] 0: 0x0006ed8b -> 0x0006ef00 [ 0.000000] On node 0 totalpages: 453951 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6157 pages used for memmap [ 0.000000] DMA32 zone: 443813 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000006ec3c000 - 000000006ec90000 [ 0.000000] PM: Registered nosave memory: 000000006ec90000 - 000000006ecb1000 [ 0.000000] PM: Registered nosave memory: 000000006ecb1000 - 000000006ecc2000 [ 0.000000] PM: Registered nosave memory: 000000006ecc2000 - 000000006ecd8000 [ 0.000000] PM: Registered nosave memory: 000000006ecd9000 - 000000006ecda000 [ 0.000000] PM: Registered nosave memory: 000000006ecda000 - 000000006ecdd000 [ 0.000000] PM: Registered nosave memory: 000000006ecdd000 - 000000006ece4000 [ 0.000000] PM: Registered nosave memory: 000000006ece4000 - 000000006ed48000 [ 0.000000] PM: Registered nosave memory: 000000006ed48000 - 000000006ed8b000 [ 0.000000] Allocating PCI resources starting at 6ef00000 (gap: 6ef00000:8fd00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88006e400000 s69824 r8192 d24384 u1048576 [ 0.000000] pcpu-alloc: s69824 r8192 d24384 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 447733 [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs mac1=00113208d62a mac2=00113208d62b mac3=0011060b0033 mac4=0011060b0034 sn=B5JDN00000 [ 0.000000] Internal HD num: 0 [ 0.000000] Internal netif num: 4 [ 0.000000] Synology Hareware Version: DS3612xs-j [ 0.000000] Mac1: 00113208d62a [ 0.000000] Mac2: 00113208d62b [ 0.000000] Mac3: 0011060b0033 [ 0.000000] Mac4: 0011060b0034 [ 0.000000] Serial Number: B5JDN00000 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1770356k/1817600k available (4737k kernel code, 1796k absent, 45448k reserved, 3845k data, 428k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1650.168 MHz processor. [ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3300.33 BogoMIPS (lpj=1650168) [ 0.001270] pid_max: default: 32768 minimum: 301 [ 0.001470] Mount-cache hash table entries: 256 [ 0.002145] tseg: 006ef00000 [ 0.002149] CPU: Physical Processor ID: 0 [ 0.002296] CPU: Processor Core ID: 0 [ 0.002426] mce: CPU supports 6 MCE banks [ 0.002621] ACPI: Core revision 20110623 [ 0.008853] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.019014] CPU0: AMD E-450 APU with Radeon(tm) HD Graphics stepping 00 [ 0.019998] Performance Events: AMD PMU driver. [ 0.019998] ... version: 0 [ 0.019998] ... bit width: 48 [ 0.019998] ... generic registers: 4 [ 0.019998] ... value mask: 0000ffffffffffff [ 0.019998] ... max period: 00007fffffffffff [ 0.019998] ... fixed-purpose events: 0 [ 0.019998] ... event mask: 000000000000000f [ 0.020286] Booting Node 0, Processors #1 Ok. [ 0.020471] smpboot cpu 1: start_ip = 98000 [ 0.092007] Brought up 2 CPUs [ 0.092162] Total of 2 processors activated (6599.90 BogoMIPS). [ 0.093203] PM: Registering ACPI NVS region at 6ec3c000 (344064 bytes) [ 0.093355] PM: Registering ACPI NVS region at 6ecb1000 (69632 bytes) [ 0.093485] PM: Registering ACPI NVS region at 6ecd9000 (4096 bytes) [ 0.093615] PM: Registering ACPI NVS region at 6ecdd000 (28672 bytes) [ 0.093759] PM: Registering ACPI NVS region at 6ed48000 (274432 bytes) [ 0.094060] xor: automatically using best checksumming function: generic_sse [ 0.098995] generic_sse: 3284.000 MB/sec [ 0.099120] xor: using function: generic_sse (3284.000 MB/sec) [ 0.099331] NET: Registered protocol family 16 [ 0.100131] Extended Config Space enabled on 0 nodes [ 0.100299] ACPI: bus type pci registered [ 0.101044] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.101256] PCI: not using MMCONFIG [ 0.101396] PCI: Using configuration type 1 for base access [ 0.101524] PCI: Using configuration type 1 for extended access [ 0.115191] bio: create slab at 0 [ 0.133021] raid6: int64x1 859 MB/s [ 0.150021] raid6: int64x2 960 MB/s [ 0.167023] raid6: int64x4 941 MB/s [ 0.184049] raid6: int64x8 800 MB/s [ 0.201022] raid6: sse2x1 1398 MB/s [ 0.218006] raid6: sse2x2 1632 MB/s [ 0.234978] raid6: sse2x4 2335 MB/s [ 0.235104] raid6: using algorithm sse2x4 (2335 MB/s) [ 0.235265] ACPI: Added _OSI(Module Device) [ 0.235406] ACPI: Added _OSI(Processor Device) [ 0.235533] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.235673] ACPI: Added _OSI(Processor Aggregator Device) [ 0.237010] ACPI: EC: Look up EC in DSDT [ 0.238713] ACPI: Executed 3 blocks of module-level executable AML code [ 0.242765] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 0.242978] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349) [ 0.246648] ACPI: Interpreter enabled [ 0.246796] ACPI: (supports S0 S4 S5) [ 0.246982] ACPI: Using IOAPIC for interrupt routing [ 0.247390] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.247679] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.284185] ACPI: No dock devices found. [ 0.285017] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.286113] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.286421] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.286544] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.286970] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.287160] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] [ 0.287366] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xffffffff] [ 0.287577] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]) [ 0.287803] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600 [ 0.287858] pci 0000:00:01.0: [1002:9806] type 0 class 0x000300 [ 0.287873] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.287883] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff] [ 0.287989] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff] [ 0.288047] pci 0000:00:01.0: supports D1 D2 [ 0.288072] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403 [ 0.288086] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff] [ 0.288153] pci 0000:00:01.1: supports D1 D2 [ 0.288200] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604 [ 0.288270] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.288277] pci 0000:00:04.0: PME# disabled [ 0.288332] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.288358] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147] [ 0.288372] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133] [ 0.288386] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127] [ 0.288399] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113] [ 0.288412] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f] [ 0.288425] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff] [ 0.288502] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.288520] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff] [ 0.288612] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.288638] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff] [ 0.288740] pci 0000:00:12.2: supports D1 D2 [ 0.288744] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.288751] pci 0000:00:12.2: PME# disabled [ 0.288780] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.288798] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff] [ 0.288890] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.288915] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff] [ 0.289022] pci 0000:00:13.2: supports D1 D2 [ 0.289026] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.289033] pci 0000:00:13.2: PME# disabled [ 0.289061] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.289160] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.289258] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.289315] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.289335] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff] [ 0.289428] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 [ 0.289527] pci 0000:00:15.0: supports D1 D2 [ 0.289563] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604 [ 0.289662] pci 0000:00:15.1: supports D1 D2 [ 0.289697] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604 [ 0.289795] pci 0000:00:15.2: supports D1 D2 [ 0.289833] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 0.289852] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff] [ 0.289945] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 0.289977] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff] [ 0.290080] pci 0000:00:16.2: supports D1 D2 [ 0.290084] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.290090] pci 0000:00:16.2: PME# disabled [ 0.290122] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600 [ 0.290172] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600 [ 0.290218] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600 [ 0.290265] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600 [ 0.290325] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600 [ 0.290371] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600 [ 0.290416] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600 [ 0.290462] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600 [ 0.290590] pci 0000:01:00.0: [13c1:1004] type 0 class 0x000104 [ 0.290611] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.290628] pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea20fff 64bit] [ 0.290640] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] [ 0.290659] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] [ 0.290703] pci 0000:01:00.0: supports D1 D2 [ 0.292032] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.292200] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 0.292207] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.292216] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.292302] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode) [ 0.292454] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.292459] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.292464] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.292469] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xffffffff] (subtractive decode) [ 0.292540] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.292779] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 [ 0.292806] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff] [ 0.292846] pci 0000:04:00.0: reg 18: [mem 0xd2004000-0xd2004fff 64bit pref] [ 0.292873] pci 0000:04:00.0: reg 20: [mem 0xd2000000-0xd2003fff 64bit pref] [ 0.292995] pci 0000:04:00.0: supports D1 D2 [ 0.292999] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.293008] pci 0000:04:00.0: PME# disabled [ 0.295001] pci 0000:00:15.1: PCI bridge to [bus 04-04] [ 0.295164] pci 0000:00:15.1: bridge window [io 0xd000-0xdfff] [ 0.295176] pci 0000:00:15.1: bridge window [mem 0xd2000000-0xd20fffff 64bit pref] [ 0.295265] pci 0000:05:00.0: [1b21:1080] type 1 class 0x000604 [ 0.295401] pci 0000:00:15.2: PCI bridge to [bus 05-06] [ 0.295533] pci 0000:00:15.2: bridge window [io 0xc000-0xcfff] [ 0.295539] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.295618] pci 0000:06:02.0: [1106:3044] type 0 class 0x000c00 [ 0.295656] pci 0000:06:02.0: reg 10: [mem 0xfe900000-0xfe9007ff] [ 0.295677] pci 0000:06:02.0: reg 14: [io 0xc000-0xc07f] [ 0.295820] pci 0000:06:02.0: supports D2 [ 0.295824] pci 0000:06:02.0: PME# supported from D2 D3hot D3cold [ 0.295832] pci 0000:06:02.0: PME# disabled [ 0.295915] pci 0000:05:00.0: PCI bridge to [bus 06-06] (subtractive decode) [ 0.295977] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] [ 0.295985] pci 0000:05:00.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.295998] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode) [ 0.296003] pci 0000:05:00.0: bridge window [mem 0xfe900000-0xfe9fffff] (subtractive decode) [ 0.296008] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.296014] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.296060] pci_bus 0000:00: on NUMA node 0 [ 0.296072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.296404] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.296464] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.296523] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT] [ 0.296589] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT] [ 0.296654] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22.BR23._PRT] [ 0.296745] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.296972] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.297194] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.309112] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.310251] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.310876] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.311540] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 [ 0.312073] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.312668] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.313338] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.313913] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.314997] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.314997] vgaarb: loaded [ 0.315129] vgaarb: bridge control possible 0000:00:01.0 [ 0.315411] SCSI subsystem initialized [ 0.316069] libata version 3.00 loaded. [ 0.316981] PCI: Using ACPI for IRQ routing [ 0.327752] PCI: pci_cache_line_size set to 64 bytes [ 0.327901] reserve RAM buffer: 000000000009d000 - 000000000009ffff [ 0.327906] reserve RAM buffer: 000000006ec3c000 - 000000006fffffff [ 0.327913] reserve RAM buffer: 000000006ecd9000 - 000000006fffffff [ 0.327919] reserve RAM buffer: 000000006ef00000 - 000000006fffffff [ 0.328128] Switching to clocksource hpet [ 0.328340] pnp: PnP ACPI init [ 0.328521] ACPI: bus type pnp registered [ 0.328974] pnp 00:00: [bus 00-ff] [ 0.328979] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.328983] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.328988] pnp 00:00: [io 0x0d00-0xffff window] [ 0.328992] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.328996] pnp 00:00: [mem 0x000c8000-0x000dffff window] [ 0.329066] pnp 00:00: [mem 0x7f000000-0xffffffff window] [ 0.329070] pnp 00:00: [mem 0x00000000 window] [ 0.329244] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.329318] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.329548] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.329716] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.330546] pnp 00:02: [io 0x040b] [ 0.330550] pnp 00:02: [io 0x04d6] [ 0.330554] pnp 00:02: [io 0x0c00-0x0c01] [ 0.330558] pnp 00:02: [io 0x0c14] [ 0.330561] pnp 00:02: [io 0x0c50-0x0c51] [ 0.330565] pnp 00:02: [io 0x0c52] [ 0.330568] pnp 00:02: [io 0x0c6c] [ 0.330571] pnp 00:02: [io 0x0c6f] [ 0.330574] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.330578] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.330581] pnp 00:02: [io 0x0cd4-0x0cd5] [ 0.330584] pnp 00:02: [io 0x0cd6-0x0cd7] [ 0.330587] pnp 00:02: [io 0x0cd8-0x0cdf] [ 0.330591] pnp 00:02: [io 0x0800-0x089f] [ 0.330595] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.330598] pnp 00:02: [io 0x0000-0x000f] [ 0.330602] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.330605] pnp 00:02: [io 0x0900-0x090f] [ 0.330608] pnp 00:02: [io 0x0910-0x091f] [ 0.330612] pnp 00:02: [io 0xfe00-0xfefe] [ 0.330615] pnp 00:02: [io 0x0060-0x005f disabled] [ 0.330619] pnp 00:02: [io 0x0064-0x0063 disabled] [ 0.330623] pnp 00:02: [mem 0xfec00000-0xfec00fff] [ 0.330626] pnp 00:02: [mem 0xfee00000-0xfee00fff] [ 0.330630] pnp 00:02: [mem 0xfed80000-0xfed8ffff] [ 0.330634] pnp 00:02: [mem 0xfed61000-0xfed70fff] [ 0.330637] pnp 00:02: [mem 0xfec10000-0xfec10fff] [ 0.330643] pnp 00:02: [mem 0xfed00000-0xfed00fff] [ 0.330646] pnp 00:02: [mem 0xffc00000-0xffffffff] [ 0.330933] system 00:02: [io 0x040b] has been reserved [ 0.331111] system 00:02: [io 0x04d6] has been reserved [ 0.331239] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.331372] system 00:02: [io 0x0c14] has been reserved [ 0.331502] system 00:02: [io 0x0c50-0x0c51] has been reserved [ 0.331645] system 00:02: [io 0x0c52] has been reserved [ 0.331774] system 00:02: [io 0x0c6c] has been reserved [ 0.331915] system 00:02: [io 0x0c6f] has been reserved [ 0.332098] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.332223] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.332342] system 00:02: [io 0x0cd4-0x0cd5] has been reserved [ 0.332476] system 00:02: [io 0x0cd6-0x0cd7] has been reserved [ 0.332596] system 00:02: [io 0x0cd8-0x0cdf] has been reserved [ 0.332714] system 00:02: [io 0x0800-0x089f] has been reserved [ 0.332834] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.332954] system 00:02: [io 0x0900-0x090f] has been reserved [ 0.333085] system 00:02: [io 0x0910-0x091f] has been reserved [ 0.333206] system 00:02: [io 0xfe00-0xfefe] has been reserved [ 0.333330] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.333467] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.333590] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.333725] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.333845] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.333964] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.334097] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved [ 0.334221] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.334469] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.334474] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.334478] pnp 00:03: [io 0x0290-0x029f] [ 0.334481] pnp 00:03: [io 0x0a20-0x0a2f] [ 0.334702] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.334831] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.334953] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.335323] pnp 00:04: [dma 4] [ 0.335328] pnp 00:04: [io 0x0000-0x000f] [ 0.335332] pnp 00:04: [io 0x0081-0x0083] [ 0.335336] pnp 00:04: [io 0x0087] [ 0.335339] pnp 00:04: [io 0x0089-0x008b] [ 0.335343] pnp 00:04: [io 0x008f] [ 0.335346] pnp 00:04: [io 0x00c0-0x00df] [ 0.335532] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.335571] pnp 00:05: [io 0x0070-0x0071] [ 0.335590] pnp 00:05: [irq 8] [ 0.335730] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.335774] pnp 00:06: [io 0x0061] [ 0.335977] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.336081] pnp 00:07: [io 0x0010-0x001f] [ 0.336086] pnp 00:07: [io 0x0022-0x003f] [ 0.336089] pnp 00:07: [io 0x0044-0x005f] [ 0.336093] pnp 00:07: [io 0x0072-0x007f] [ 0.336096] pnp 00:07: [io 0x0080] [ 0.336099] pnp 00:07: [io 0x0084-0x0086] [ 0.336102] pnp 00:07: [io 0x0088] [ 0.336105] pnp 00:07: [io 0x008c-0x008e] [ 0.336109] pnp 00:07: [io 0x0090-0x009f] [ 0.336112] pnp 00:07: [io 0x00a2-0x00bf] [ 0.336115] pnp 00:07: [io 0x00e0-0x00ef] [ 0.336120] pnp 00:07: [io 0x04d0-0x04d1] [ 0.336281] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.336423] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.336443] pnp 00:08: [io 0x00f0-0x00ff] [ 0.336461] pnp 00:08: [irq 13] [ 0.336675] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.336930] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.337414] pnp 00:0a: [mem 0x6f000000-0x7effffff] [ 0.337550] system 00:0a: [mem 0x6f000000-0x7effffff] could not be reserved [ 0.337691] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.337939] pnp 00:0b: [mem 0xfed00000-0xfed003ff] [ 0.338094] pnp 00:0b: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.338105] pnp: PnP ACPI: found 12 devices [ 0.338224] ACPI: ACPI bus type pnp unregistered [ 0.351052] PCI: max bus depth: 2 pci_try_num: 3 [ 0.351124] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.351261] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 0.351391] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.351524] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.351748] pci 0000:00:14.4: PCI bridge to [bus 02-02] [ 0.351903] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.352066] pci 0000:00:15.1: PCI bridge to [bus 04-04] [ 0.352194] pci 0000:00:15.1: bridge window [io 0xd000-0xdfff] [ 0.352331] pci 0000:00:15.1: bridge window [mem 0xd2000000-0xd20fffff 64bit pref] [ 0.352538] pci 0000:05:00.0: PCI bridge to [bus 06-06] [ 0.352672] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] [ 0.352796] pci 0000:05:00.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.352943] pci 0000:00:15.2: PCI bridge to [bus 05-06] [ 0.353074] pci 0000:00:15.2: bridge window [io 0xc000-0xcfff] [ 0.353196] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.353365] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.353494] pci 0000:00:04.0: setting latency timer to 64 [ 0.353510] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.353646] pci 0000:00:15.0: setting latency timer to 64 [ 0.353656] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.353778] pci 0000:00:15.1: setting latency timer to 64 [ 0.353788] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.353924] pci 0000:00:15.2: setting latency timer to 64 [ 0.353941] pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.354078] pci 0000:05:00.0: setting latency timer to 64 [ 0.354086] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.354090] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.354094] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.354098] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff] [ 0.354103] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.354107] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.354111] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.354115] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.354119] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.354123] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.354127] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff] [ 0.354131] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.354135] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd20fffff 64bit pref] [ 0.354140] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.354143] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.354147] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.354151] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.354155] pci_bus 0000:06: resource 4 [io 0xc000-0xcfff] [ 0.354159] pci_bus 0000:06: resource 5 [mem 0xfe900000-0xfe9fffff] [ 0.354285] NET: Registered protocol family 2 [ 0.354549] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.355323] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.357854] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.358619] TCP: Hash tables configured (established 262144 bind 65536) [ 0.358768] TCP reno registered [ 0.358912] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.359100] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.359389] NET: Registered protocol family 1 [ 0.359838] RPC: Registered named UNIX socket transport module. [ 0.359991] RPC: Registered udp transport module. [ 0.360149] RPC: Registered tcp transport module. [ 0.360276] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.360437] pci 0000:00:01.0: Boot video device [ 0.360469] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.180254] pci 0000:00:12.0: PCI INT A disabled [ 1.180441] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.180613] pci 0000:00:12.2: PCI INT B disabled [ 1.180763] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.253247] pci 0000:00:13.0: PCI INT A disabled [ 1.253414] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.253584] pci 0000:00:13.2: PCI INT B disabled [ 1.253744] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.326249] pci 0000:00:14.5: PCI INT C disabled [ 1.326428] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.398255] pci 0000:00:16.0: PCI INT A disabled [ 1.398436] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.398607] pci 0000:00:16.2: PCI INT B disabled [ 1.398788] PCI: CLS 64 bytes, default 64 [ 1.398894] Trying to unpack rootfs image as initramfs... [ 1.399297] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 1.405330] Freeing initrd memory: 5740k freed [ 1.410637] perf: AMD IBS detected (0x000000ff) [ 1.412090] Intel AES-NI instructions are not detected. [ 1.412243] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation [ 1.420653] VFS: Disk quotas dquot_6.5.2 [ 1.420879] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.421839] msgmni has been set to 3468 [ 1.422556] async_tx: api initialized (async) [ 1.422892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.423166] io scheduler noop registered [ 1.423359] io scheduler cfq registered (default) [ 1.476487] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.498230] brd: module loaded [ 1.498757] Loading iSCSI transport class v2.0-870. [ 1.500120] rdac: device handler registered [ 1.500755] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 1.501104] isci: Intel(R) C600 SAS Controller Driver - version 1.0.0 [ 1.501675] iscsi: registered transport (qla4xxx) [ 1.501970] QLogic iSCSI HBA Driver [ 1.502332] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [ 1.502595] mpt2sas version 11.100.00.00 loaded [ 1.502957] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 1.503292] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 1.503547] 3w-9xxx 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.503697] 3w-9xxx 0000:01:00.0: setting latency timer to 64 [ 1.759248] scsi0 : 3ware 9000 Storage Controller [ 1.760251] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16. [ 2.066240] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8. [ 2.067176] scsi 0:0:0:0: Direct-Access AMCC 9650SE-8LP DISK 4.10 PQ: 0 ANSI: 5 [ 2.078826] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 2.079378] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) [ 2.079864] VMware PVSCSI driver - version 1.0.1.0-k [ 2.080583] sd 0:0:0:0: [sda] 5859311616 512-byte logical blocks: (2.99 TB/2.72 TiB) [ 2.080928] ahci 0000:00:11.0: version 3.0 [ 2.080979] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.081310] sd 0:0:0:0: [sda] Write Protect is off [ 2.081373] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.081379] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.081980] sd 0:0:0:0: [sda] Mode Sense: 23 00 10 00 [ 2.082435] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, supports DPO and FUA [ 2.085059] scsi1 : ahci [ 2.085708] scsi2 : ahci [ 2.086246] scsi3 : ahci [ 2.086762] scsi4 : ahci [ 2.087177] scsi5 : ahci [ 2.087624] scsi6 : ahci [ 2.088150] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19 [ 2.090947] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19 [ 2.091162] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19 [ 2.091364] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19 [ 2.091566] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19 [ 2.091769] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19 [ 2.091971] Enable Synology sata fast booting [ 2.129952] sda: sda1 sda2 [ 2.132323] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.412301] Refined TSC clocksource calibration: 1649.962 MHz. [ 2.412460] Switching to clocksource tsc [ 3.924523] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 3.924828] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 3.924989] Copyright (c) 2007 Atheros Corporation. [ 3.925407] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011) [ 3.925690] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25) [ 3.926341] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 3.926504] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.926742] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3.926904] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.927201] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k [ 3.927363] Copyright (c) 2007-2011 Intel Corporation. [ 3.927662] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 3.928029] sky2: driver version 1.30 [ 3.928430] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25 [ 3.929224] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI [ 3.929985] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.933470] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.933624] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.934050] rtc_cmos 00:05: RTC can wake from S4 [ 3.934403] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.934603] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.934813] i2c /dev entries driver [ 3.935083] md: linear personality registered for level -1 [ 3.935228] md: raid0 personality registered for level 0 [ 3.935371] md: raid1 personality registered for level 1 [ 3.935514] md: raid10 personality registered for level 10 [ 3.935657] md: raid6 personality registered for level 6 [ 3.935798] md: raid5 personality registered for level 5 [ 3.935935] md: raid4 personality registered for level 4 [ 3.936277] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.936517] cpuidle: using governor ladder [ 3.936649] cpuidle: using governor menu [ 3.937128] TCP cubic registered [ 3.937276] NET: Registered protocol family 17 [ 3.938246] rtc_cmos 00:05: setting system clock to 2013-07-10 17:59:06 UTC (1373479146) [ 4.227246] ata4: SATA link down (SStatus 0 SControl 300) [ 4.227448] ata3: SATA link down (SStatus 0 SControl 300) [ 4.227633] ata2: SATA link down (SStatus 0 SControl 300) [ 4.227823] ata5: SATA link down (SStatus 0 SControl 300) [ 4.228096] ata6: SATA link down (SStatus 0 SControl 300) [ 4.382269] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.382920] ata1.00: ATA-8: STT_FTM32GX25H, 1819, max UDMA/133 [ 4.383092] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 4.386418] ata1.00: configured for UDMA/133 [ 4.386680] ata1.00: Find SSD disks. [sTT_FTM32GX25H] [ 4.387149] scsi 1:0:0:0: Direct-Access ATA STT_FTM32GX25H 1819 PQ: 0 ANSI: 5 [ 4.388071] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 4.388437] sd 1:0:0:0: [sdb] Write Protect is off [ 4.388593] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.388654] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.390056] sdb: sdb1 sdb2 [ 4.391259] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.391480] md: Waiting for all devices to be available before autodetect [ 4.391654] md: If you don't use raid, use raid=noautodetect [ 4.392299] md: Autodetecting RAID arrays. [ 4.395699] md: deny sda1. [ 4.395867] md: export_rdev(sda1) [ 4.414045] md: deny sda2. [ 4.414210] md: export_rdev(sda2) [ 4.415058] md: Scanned 4 and added 2 devices. [ 4.415233] md: autorun ... [ 4.415370] md: considering sdb1 ... [ 4.415518] md: adding sdb1 ... [ 4.415659] md: sdb2 has different UUID to sdb1 [ 4.415807] md: created md0 [ 4.415946] md: bind [ 4.416124] md: running: [ 4.416696] bio: create slab at 1 [ 4.417047] md/raid1:md0: active with 1 out of 12 mirrors [ 4.417238] md0: detected capacity change from 0 to 2549940224 [ 4.417531] md: considering sdb2 ... [ 4.417700] md: adding sdb2 ... [ 4.418272] md: created md1 [ 4.418426] md: bind [ 4.418571] md: running: [ 4.419100] md/raid1:md1: active with 1 out of 12 mirrors [ 4.419293] md1: detected capacity change from 0 to 2147418112 [ 4.419574] md: ... autorun DONE. [ 4.420099] md1: unknown partition table [ 4.420500] RAMDISK: gzip image found at block 0 [ 4.685482] VFS: Mounted root (ext2 filesystem) on device 1:0. [ 4.701060] e1000e: Intel(R) PRO/1000 Network Driver - 2.4.14-NAPI [ 4.701226] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 4.714749] r8168 Gigabit Ethernet driver 8.036.00-NAPI loaded [ 4.714966] r8168 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.715156] r8168 0000:04:00.0: setting latency timer to 64 [ 4.715250] r8168 0000:04:00.0: irq 40 for MSI/MSI-X [ 4.726221] eth%d: 0xffffc9000005a000, 60:a4:4c:b2:96:b5, IRQ 40 [ 4.729476] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4.729732] r8168 Copyright (C) 2013 Realtek NIC software team [ 4.729735] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 4.729737] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 4.734415] bromolow_synobios: module license 'Synology Inc.' taints kernel. [ 4.734583] Disabling lock debugging due to kernel taint [ 4.737155] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 [ 4.737469] IP: [] syno_libata_index_get_by_map+0x36/0x83 [ 4.737662] PGD 6b1cb067 PUD 6b1ca067 PMD 0 [ 4.737931] Oops: 0000 [#1] SMP [ 4.738005] CPU 0 [ 4.738005] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O) [ 4.738005] [ 4.738005] Pid: 1273, comm: insmod Tainted: P O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO [ 4.738005] RIP: 0010:[] [] syno_libata_index_get_by_map+0x36/0x83 [ 4.738005] RSP: 0018:ffff88006dfbbd48 EFLAGS: 00010286 [ 4.738005] RAX: 0000000000000000 RBX: ffff88006dfbbd58 RCX: 0000000000000000 [ 4.738005] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006dfbbd58 [ 4.738005] RBP: ffff88006ac68000 R08: ffffffff81921c60 R09: 0000000000000000 [ 4.738005] R10: ffff88006b3fa400 R11: 0000000000000016 R12: 0000000000000000 [ 4.738005] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016 [ 4.738005] FS: 0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000 [ 4.738005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4.738005] CR2: 0000000000000068 CR3: 000000006b1ce000 CR4: 00000000000006f0 [ 4.738005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4.738005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 4.738005] Process insmod (pid: 1273, threadinfo ffff88006dfba000, task ffff88006b3b77d0) [ 4.738005] Stack: [ 4.738005] ffff88006ac68000 ffffffff812077f8 0000000000000000 ffffffffa009f720 [ 4.738005] ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720 [ 4.738005] 0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4 [ 4.738005] Call Trace: [ 4.738005] [] ? scsi_host_lookup+0x46/0x4e [ 4.738005] [] ? syno_libata_disk_map_table_gen+0x43/0x92 [ 4.738005] [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios] [ 4.738005] [] ? synobios_model_init+0x54/0x190 [bromolow_synobios] [ 4.738005] [] ? synobios_init+0x44/0x2d0 [bromolow_synobios] [ 4.738005] [] ? do_one_initcall+0x79/0x127 [ 4.738005] [] ? sys_init_module+0x104a/0x11ef [ 4.738005] [] ? fput+0x175/0x196 [ 4.738005] [] ? filp_close+0x64/0x6c [ 4.738005] [] ? system_call_fastpath+0x16/0x1b [ 4.738005] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 [ 4.738005] RIP [] syno_libata_index_get_by_map+0x36/0x83 [ 4.738005] RSP [ 4.738005] CR2: 0000000000000068 [ 4.747597] ---[ end trace 454336d2c682554a ]--- [ 4.786724] md0: unknown partition table [ 4.875779] EXT4-fs (md0): barriers disabled [ 4.876564] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 5.037810] Adding 2097084k swap on /dev/md1. Priority:-1 extents:1 across:2097084k [ 12.389781] synoacl module [synoacl_ext4] is not loaded [ 12.389950] synoacl module [synoacl_vfs] is not loaded [ 12.410534] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0) [ 12.497663] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 12.497932] VFS: Mounted root (ext4 filesystem) readonly on device 9:0. [ 12.498099] Trying to move old root to /initrd ... okay [ 12.501312] Freeing unused kernel memory: 428k freed [ 12.501671] Write protecting the kernel read-only data: 8192k [ 12.509830] Freeing unused kernel memory: 1388k freed [ 12.512051] Freeing unused kernel memory: 196k freed [ 12.543232] EXT4-fs (md0): re-mounted. Opts: (null)

OK, I clean the disk and make all new. I Test install the system with installed controller (4 HDD's on the controller).System HDD ist on the onboard controller first port. Boot from Stick ok, Synology assistant found the device, install from system ok. next the system reboot to install the config it boot and when its finish it make a reboot. The config can not be installed. This is the log from the system. I hope the log has more information. Jul 10 10:59:23 kernel: [ 20.921655] 3w-9xxx: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0xA1. insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter insmod: can't insert '/lib/modules/mdio.ko': invalid module format insmod: can't insert '/lib/modules/crypto.ko': invalid module format insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format insmod: can't insert '/lib/modules/aead.ko': invalid module format insmod: can't insert '/lib/modules/pcompress.ko': invalid module format insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format insmod: can't insert '/lib/modules/rng.ko': invalid module format insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format insmod: can't insert '/lib/modules/cryptd.ko': invalid module format insmod: can't insert '/lib/modules/aesni-intel.ko': No such device insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format insmod: can't insert '/lib/modules/synobios.ko': File exists Jul 10 10:59:17 syslogd started: BusyBox v1.16.1 Jul 10 10:59:17 kernel: [ 1.420879] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Jul 10 10:59:17 kernel: [ 1.502957] 3ware Storage Controller device driver for Linux v1.26.02.003. Jul 10 10:59:17 kernel: [ 1.503292] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. Jul 10 10:59:17 kernel: [ 1.760251] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16. Jul 10 10:59:17 kernel: [ 2.066240] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8. Jul 10 10:59:17 kernel: [ 2.091971] Enable Synology sata fast booting Jul 10 10:59:17 kernel: [ 4.386680] ata1.00: Find SSD disks. [sTT_FTM32GX25H] Jul 10 10:59:17 kernel: [ 4.415659] md: sdb2 has different UUID to sdb1 Jul 10 10:59:17 kernel: [ 4.729732] r8168 Copyright (C) 2013 Realtek NIC software team Jul 10 10:59:17 kernel: [ 4.729735] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . Jul 10 10:59:17 kernel: [ 4.729737] This is free software, and you are welcome to redistribute it under certain conditions; see . Jul 10 10:59:17 kernel: [ 4.734415] bromolow_synobios: module license 'Synology Inc.' taints kernel. Jul 10 10:59:17 kernel: [ 4.734583] Disabling lock debugging due to kernel taint Jul 10 10:59:17 kernel: [ 4.737155] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 Jul 10 10:59:17 kernel: [ 4.737469] IP: [] syno_libata_index_get_by_map+0x36/0x83 Jul 10 10:59:17 kernel: [ 4.737662] PGD 6b1cb067 PUD 6b1ca067 PMD 0 Jul 10 10:59:17 kernel: [ 4.737931] Oops: 0000 [#1] SMP Jul 10 10:59:17 kernel: [ 4.738005] CPU 0 Jul 10 10:59:17 kernel: [ 4.738005] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O) Jul 10 10:59:17 kernel: [ 4.738005] Jul 10 10:59:17 kernel: [ 4.738005] Pid: 1273, comm: insmod Tainted: P O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO Jul 10 10:59:17 kernel: [ 4.738005] RIP: 0010:[] [] syno_libata_index_get_by_map+0x36/0x83 Jul 10 10:59:17 kernel: [ 4.738005] RSP: 0018:ffff88006dfbbd48 EFLAGS: 00010286 Jul 10 10:59:17 kernel: [ 4.738005] RAX: 0000000000000000 RBX: ffff88006dfbbd58 RCX: 0000000000000000 Jul 10 10:59:17 kernel: [ 4.738005] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006dfbbd58 Jul 10 10:59:17 kernel: [ 4.738005] RBP: ffff88006ac68000 R08: ffffffff81921c60 R09: 0000000000000000 Jul 10 10:59:17 kernel: [ 4.738005] R10: ffff88006b3fa400 R11: 0000000000000016 R12: 0000000000000000 Jul 10 10:59:17 kernel: [ 4.738005] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016 Jul 10 10:59:17 kernel: [ 4.738005] FS: 0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000 Jul 10 10:59:17 kernel: [ 4.738005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Jul 10 10:59:17 kernel: [ 4.738005] CR2: 0000000000000068 CR3: 000000006b1ce000 CR4: 00000000000006f0 Jul 10 10:59:17 kernel: [ 4.738005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Jul 10 10:59:17 kernel: [ 4.738005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Jul 10 10:59:17 kernel: [ 4.738005] Process insmod (pid: 1273, threadinfo ffff88006dfba000, task ffff88006b3b77d0) Jul 10 10:59:17 kernel: [ 4.738005] Stack: Jul 10 10:59:17 kernel: [ 4.738005] ffff88006ac68000 ffffffff812077f8 0000000000000000 ffffffffa009f720 Jul 10 10:59:17 kernel: [ 4.738005] ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720 Jul 10 10:59:17 kernel: [ 4.738005] 0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4 Jul 10 10:59:17 kernel: [ 4.738005] Call Trace: Jul 10 10:59:17 kernel: [ 4.738005] [] ? scsi_host_lookup+0x46/0x4e Jul 10 10:59:17 kernel: [ 4.738005] [] ? syno_libata_disk_map_table_gen+0x43/0x92 Jul 10 10:59:17 kernel: [ 4.738005] [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios] Jul 10 10:59:17 kernel: [ 4.738005] [] ? synobios_model_init+0x54/0x190 [bromolow_synobios] Jul 10 10:59:17 kernel: [ 4.738005] [] ? synobios_init+0x44/0x2d0 [bromolow_synobios] Jul 10 10:59:17 kernel: [ 4.738005] [] ? do_one_initcall+0x79/0x127 Jul 10 10:59:17 kernel: [ 4.738005] [] ? sys_init_module+0x104a/0x11ef Jul 10 10:59:17 kernel: [ 4.738005] [] ? fput+0x175/0x196 Jul 10 10:59:17 kernel: [ 4.738005] [] ? filp_close+0x64/0x6c Jul 10 10:59:17 kernel: [ 4.738005] [] ? system_call_fastpath+0x16/0x1b Jul 10 10:59:17 kernel: [ 4.738005] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 Jul 10 10:59:17 kernel: [ 4.738005] RIP [] syno_libata_index_get_by_map+0x36/0x83 Jul 10 10:59:17 kernel: [ 4.738005] RSP Jul 10 10:59:17 kernel: [ 4.738005] CR2: 0000000000000068 Jul 10 10:59:17 kernel: [ 4.747597] ---[ end trace 454336d2c682554a ]--- Jul 10 10:59:17 kernel: [ 12.389781] synoacl module [synoacl_ext4] is not loaded Jul 10 10:59:17 kernel: [ 12.389950] synoacl module [synoacl_vfs] is not loaded Jul 10 10:59:17 kernel: [ 12.410534] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0) Jul 10 10:59:17 kernel: [ 13.481348] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0) Jul 10 10:59:17 kernel: [ 13.506307] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) Jul 10 10:59:17 kernel: [ 13.543957] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel) Jul 10 10:59:17 kernel: [ 13.552753] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel) Jul 10 10:59:17 kernel: [ 13.564300] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel) Jul 10 10:59:17 kernel: [ 13.573973] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel) Jul 10 10:59:17 kernel: [ 13.581829] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel) Jul 10 10:59:17 kernel: [ 13.591797] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel) Jul 10 10:59:17 kernel: [ 13.600329] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel) Jul 10 10:59:17 kernel: [ 13.609673] cryptomgr: exports duplicate symbol alg_test (owned by kernel) Jul 10 10:59:17 kernel: [ 13.629393] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel) Jul 10 10:59:17 kernel: [ 13.639387] rng: exports duplicate symbol crypto_default_rng (owned by kernel) Jul 10 10:59:17 kernel: [ 13.689386] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel) Jul 10 10:59:17 kernel: [ 13.704330] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel) Jul 10 10:59:17 kernel: [ 13.734686] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel) Jul 10 10:59:17 kernel: [ 13.789682] libcrc32c: exports duplicate symbol crc32c (owned by kernel) Jul 10 10:59:17 kernel: [ 13.798661] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel) Jul 10 10:59:17 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab Jul 10 10:59:17 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(706): value=[cups] and default value=[cups] not matched Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(706): value=[cups] and default value=[cups] not matched Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [printcap name=cups] Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [winbind enum groups=yes] Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [realm=*] Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [passdb backend=smbpasswd] Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [printing=cups] Jul 10 10:59:17 s30_synocheckuser: CheckSmbConf(796): append default setting = [winbind enum users=yes] Jul 10 10:59:18 synologset1: SYNOLogChangeSize : logfile /var/log/synosys.log not existed Jul 10 10:59:21 dhcpcd[3740]: dhcpReboot: do not want cache Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: scemd.c:127 open /dev/synobios error! Jul 10 10:59:23 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used. Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 Jul 10 10:59:23 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 Jul 10 10:59:23 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 10:59:23 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set Jul 10 10:59:23 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20 Jul 10 10:59:23 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0 Jul 10 10:59:23 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 10:59:23 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 10:59:23 scemd: smartctl_enable.c:92 AtaSmartEnable failed. Jul 10 10:59:23 scemd: SmartDataRead(107) enable smart /dev/sda fail Jul 10 10:59:23 scemd: disk_temperature_get.c:71 read value /dev/sda fail Jul 10 10:59:23 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled. Jul 10 10:59:23 scemd: external_microp_id_check.c:44 Fail to open synobios platform error Jul 10 10:59:23 scemd: write to uart2 error, error=(5)Input/output error Jul 10 10:59:23 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory Jul 10 10:59:23 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd Jul 10 10:59:23 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56] Jul 10 10:59:23 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory Jul 10 10:59:23 kernel: [ 20.921655] 3w-9xxx: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0xA1. Jul 10 10:59:23 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd Jul 10 10:59:23 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id Jul 10 10:59:23 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 10:59:23 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 10:59:23 synocheckvolume: smartctl_enable.c:92 AtaSmartEnable failed. Jul 10 10:59:23 synocheckvolume: SmartDataRead(107) enable smart /dev/sda fail Jul 10 10:59:23 synocheckvolume: disk_temperature_get.c:71 read value /dev/sda fail Jul 10 10:59:24 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd Jul 10 10:59:24 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 10:59:24 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 10:59:24 manutild: manutild.c:5296 Fail to get external sata devices Jul 10 10:59:24 synocheckshare: service_disable_set.c(68)Not defined date : id=4 Jul 10 10:59:24 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] Jul 10 10:59:24 synousbdisk: RCClean succeeded Jul 10 10:59:24 synosata: synosata.c:152 no external sata devices granted Jul 10 10:59:24 synoexternal: write to uart2 error, error=(5)Input/output error killall: synolunbkp: no process killed Jul 10 10:59:26 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon Jul 10 10:59:26 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2 Jul 10 10:59:26 hotplugd: ##### ACTION:add Jul 10 10:59:26 hotplugd: DEVICE:/proc/bus/usb/001/001 Jul 10 10:59:26 hotplugd: DEVPATH:usb1 Jul 10 10:59:26 hotplugd: SUBSYSTEM:usb Jul 10 10:59:27 synoexternal: write to uart2 error, error=(5)Input/output error Jul 10 10:59:27 kernel: [ 25.310420] sd 7:0:0:0: [sdu] No Caching mode page present Jul 10 10:59:27 kernel: [ 25.310543] sd 7:0:0:0: [sdu] Assuming drive cache: write through Jul 10 10:59:27 kernel: [ 25.322930] sd 7:0:0:0: [sdu] No Caching mode page present Jul 10 10:59:27 kernel: [ 25.323101] sd 7:0:0:0: [sdu] Assuming drive cache: write through Jul 10 10:59:28 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance Jul 10 10:59:28 kernel: [ 25.716646] sd 7:0:0:0: [sdu] No Caching mode page present Jul 10 10:59:28 kernel: [ 25.716783] sd 7:0:0:0: [sdu] Assuming drive cache: write through Jul 10 10:59:29 kernel: [ 26.668128] Got empty serial number. Generate serial number from product. Jul 10 10:59:29 syno_poweroff_task: volume_parts_info_get_by_dev.c:92 Dev:sdu cannot find PostfixNumber. Jul 10 10:59:29 syno_poweroff_task: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdu] failed. (0x2000) Jul 10 10:59:29 syslogd exiting I had also tested to install the system on the 3ware HDD but the install crash with a error. (onboard are disabled)

here a new log, 3ware controller are found but the same fail. The System is a ASUS e45m1-m pro, 2gb ddr3, boot by USB-stick, System HDD: Onboard SATA-Controller with 32GB SSD DISK, 3ware Controlle see post's before. insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter insmod: can't insert '/lib/modules/mdio.ko': invalid module format insmod: can't insert '/lib/modules/crypto.ko': invalid module format insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format insmod: can't insert '/lib/modules/aead.ko': invalid module format insmod: can't insert '/lib/modules/pcompress.ko': invalid module format insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format insmod: can't insert '/lib/modules/rng.ko': invalid module format insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format insmod: can't insert '/lib/modules/cryptd.ko': invalid module format insmod: can't insert '/lib/modules/aesni-intel.ko': No such device insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format insmod: can't insert '/lib/modules/synobios.ko': File exists Jul 10 17:56:53 syslogd started: BusyBox v1.16.1 Jul 10 17:56:53 kernel: [ 1.421336] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Jul 10 17:56:53 kernel: [ 1.498877] 3ware Storage Controller device driver for Linux v1.26.02.003. Jul 10 17:56:53 kernel: [ 1.499165] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. Jul 10 17:56:53 kernel: [ 1.704296] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16. Jul 10 17:56:53 kernel: [ 2.010237] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8. Jul 10 17:56:53 kernel: [ 2.035023] Enable Synology sata fast booting Jul 10 17:56:53 kernel: [ 4.328620] ata1.00: Find SSD disks. [sTT_FTM32GX25H] Jul 10 17:56:53 kernel: [ 4.335445] md: sdb2 has different UUID to sdb1 Jul 10 17:56:53 kernel: [ 4.644826] r8168 Copyright (C) 2013 Realtek NIC software team Jul 10 17:56:53 kernel: [ 4.644829] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . Jul 10 17:56:53 kernel: [ 4.644832] This is free software, and you are welcome to redistribute it under certain conditions; see . Jul 10 17:56:53 kernel: [ 4.648720] bromolow_synobios: module license 'Synology Inc.' taints kernel. Jul 10 17:56:53 kernel: [ 4.648886] Disabling lock debugging due to kernel taint Jul 10 17:56:53 kernel: [ 4.651722] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 Jul 10 17:56:53 kernel: [ 4.652006] IP: [] syno_libata_index_get_by_map+0x36/0x83 Jul 10 17:56:53 kernel: [ 4.652006] PGD 678bc067 PUD 678bd067 PMD 0 Jul 10 17:56:53 kernel: [ 4.652006] Oops: 0000 [#1] SMP Jul 10 17:56:53 kernel: [ 4.652006] CPU 0 Jul 10 17:56:53 kernel: [ 4.652006] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O) Jul 10 17:56:53 kernel: [ 4.652006] Jul 10 17:56:53 kernel: [ 4.652006] Pid: 1262, comm: insmod Tainted: P O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO Jul 10 17:56:53 kernel: [ 4.652006] RIP: 0010:[] [] syno_libata_index_get_by_map+0x36/0x83 Jul 10 17:56:53 kernel: [ 4.652006] RSP: 0018:ffff88006ae67d48 EFLAGS: 00010286 Jul 10 17:56:53 kernel: [ 4.652006] RAX: 0000000000000000 RBX: ffff88006ae67d58 RCX: 0000000000000000 Jul 10 17:56:53 kernel: [ 4.652006] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006ae67d58 Jul 10 17:56:53 kernel: [ 4.652006] RBP: ffff88006b37c000 R08: ffffffff81921c60 R09: 0000000000000000 Jul 10 17:56:53 kernel: [ 4.652006] R10: ffff88006ac49200 R11: 0000000000000016 R12: 0000000000000000 Jul 10 17:56:53 kernel: [ 4.652006] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016 Jul 10 17:56:53 kernel: [ 4.652006] FS: 0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000 Jul 10 17:56:53 kernel: [ 4.652006] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Jul 10 17:56:53 kernel: [ 4.652006] CR2: 0000000000000068 CR3: 00000000678bf000 CR4: 00000000000006f0 Jul 10 17:56:53 kernel: [ 4.652006] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Jul 10 17:56:53 kernel: [ 4.652006] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Jul 10 17:56:53 kernel: [ 4.652006] Process insmod (pid: 1262, threadinfo ffff88006ae66000, task ffff88006dd60250) Jul 10 17:56:53 kernel: [ 4.652006] Stack: Jul 10 17:56:53 kernel: [ 4.652006] ffff88006b37c000 ffffffff812077f8 0000000000000000 ffffffffa009f720 Jul 10 17:56:53 kernel: [ 4.652006] ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720 Jul 10 17:56:53 kernel: [ 4.652006] 0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4 Jul 10 17:56:53 kernel: [ 4.652006] Call Trace: Jul 10 17:56:53 kernel: [ 4.652006] [] ? scsi_host_lookup+0x46/0x4e Jul 10 17:56:53 kernel: [ 4.652006] [] ? syno_libata_disk_map_table_gen+0x43/0x92 Jul 10 17:56:53 kernel: [ 4.652006] [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios] Jul 10 17:56:53 kernel: [ 4.652006] [] ? synobios_model_init+0x54/0x190 [bromolow_synobios] Jul 10 17:56:53 kernel: [ 4.652006] [] ? synobios_init+0x44/0x2d0 [bromolow_synobios] Jul 10 17:56:53 kernel: [ 4.652006] [] ? do_one_initcall+0x79/0x127 Jul 10 17:56:53 kernel: [ 4.652006] [] ? sys_init_module+0x104a/0x11ef Jul 10 17:56:53 kernel: [ 4.652006] [] ? fput+0x175/0x196 Jul 10 17:56:53 kernel: [ 4.652006] [] ? filp_close+0x64/0x6c Jul 10 17:56:53 kernel: [ 4.652006] [] ? system_call_fastpath+0x16/0x1b Jul 10 17:56:53 kernel: [ 4.652006] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 Jul 10 17:56:53 kernel: [ 4.652006] RIP [] syno_libata_index_get_by_map+0x36/0x83 Jul 10 17:56:53 kernel: [ 4.652006] RSP Jul 10 17:56:53 kernel: [ 4.652006] CR2: 0000000000000068 Jul 10 17:56:53 kernel: [ 4.662237] ---[ end trace 16b7282d3ce12da0 ]--- Jul 10 17:56:53 kernel: [ 5.083628] synoacl module [synoacl_ext4] is not loaded Jul 10 17:56:53 kernel: [ 5.083787] synoacl module [synoacl_vfs] is not loaded Jul 10 17:56:53 kernel: [ 5.096800] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0) Jul 10 17:56:53 kernel: [ 6.068166] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0) Jul 10 17:56:53 kernel: [ 6.094674] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) Jul 10 17:56:53 kernel: [ 6.128799] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel) Jul 10 17:56:53 kernel: [ 6.138799] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel) Jul 10 17:56:53 kernel: [ 6.147489] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel) Jul 10 17:56:53 kernel: [ 6.156795] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel) Jul 10 17:56:53 kernel: [ 6.165814] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel) Jul 10 17:56:53 kernel: [ 6.174378] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel) Jul 10 17:56:53 kernel: [ 6.184562] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel) Jul 10 17:56:53 kernel: [ 6.194361] cryptomgr: exports duplicate symbol alg_test (owned by kernel) Jul 10 17:56:53 kernel: [ 6.212647] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel) Jul 10 17:56:53 kernel: [ 6.223291] rng: exports duplicate symbol crypto_default_rng (owned by kernel) Jul 10 17:56:53 kernel: [ 6.274336] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel) Jul 10 17:56:53 kernel: [ 6.289368] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel) Jul 10 17:56:53 kernel: [ 6.319686] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel) Jul 10 17:56:53 kernel: [ 6.373686] libcrc32c: exports duplicate symbol crc32c (owned by kernel) Jul 10 17:56:53 kernel: [ 6.383803] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel) Jul 10 17:56:53 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab Jul 10 17:56:53 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: scemd.c:127 open /dev/synobios error! Jul 10 17:56:58 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used. Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 Jul 10 17:56:58 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 Jul 10 17:56:58 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:56:58 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set Jul 10 17:56:58 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20 Jul 10 17:56:58 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0 Jul 10 17:56:58 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled. Jul 10 17:56:58 scemd: external_microp_id_check.c:44 Fail to open synobios platform error Jul 10 17:56:58 scemd: write to uart2 error, error=(5)Input/output error Jul 10 17:56:59 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory Jul 10 17:56:59 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd Jul 10 17:56:59 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56] Jul 10 17:56:59 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory Jul 10 17:56:59 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd Jul 10 17:56:59 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id Jul 10 17:56:59 synocheckshare: service_disable_set.c(68)Not defined date : id=4 Jul 10 17:56:59 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] Jul 10 17:56:59 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd Jul 10 17:56:59 synousbdisk: RCClean succeeded Jul 10 17:56:59 synosata: synosata.c:152 no external sata devices granted Jul 10 17:57:00 synoexternal: write to uart2 error, error=(5)Input/output error killall: synolunbkp: no process killed Jul 10 17:57:01 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon Jul 10 17:57:01 kernel: [ 14.833889] Got empty serial number. Generate serial number from product. Jul 10 17:57:02 synoexternal: write to uart2 error, error=(5)Input/output error Jul 10 17:57:03 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab Jul 10 17:57:04 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance Jul 10 17:57:04 avahi-daemon[6656]: Failed to add service 'nas' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record Jul 10 17:57:04 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2 Jul 10 17:57:04 hotplugd: ##### ACTION:add Jul 10 17:57:04 hotplugd: DEVICE:/proc/bus/usb/001/001 Jul 10 17:57:04 hotplugd: DEVPATH:usb1 Jul 10 17:57:04 hotplugd: SUBSYSTEM:usb Jul 10 17:57:05 kernel: [ 19.227630] sd 8:0:0:0: [sdu] No Caching mode page present Jul 10 17:57:05 kernel: [ 19.227754] sd 8:0:0:0: [sdu] Assuming drive cache: write through Jul 10 17:57:05 kernel: [ 19.234518] sd 8:0:0:0: [sdu] No Caching mode page present Jul 10 17:57:05 kernel: [ 19.234670] sd 8:0:0:0: [sdu] Assuming drive cache: write through Jul 10 17:57:06 syno_poweroff_task: volume_parts_info_get_by_dev.c:92 Dev:sdu cannot find PostfixNumber. Jul 10 17:57:06 kernel: [ 19.630483] sd 8:0:0:0: [sdu] No Caching mode page present Jul 10 17:57:06 kernel: [ 19.630615] sd 8:0:0:0: [sdu] Assuming drive cache: write through Jul 10 17:57:06 syno_poweroff_task: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdu] failed. (0x2000) Jul 10 17:57:06 syslogd exiting insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter insmod: can't insert '/lib/modules/mdio.ko': invalid module format insmod: can't insert '/lib/modules/crypto.ko': invalid module format insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format insmod: can't insert '/lib/modules/aead.ko': invalid module format insmod: can't insert '/lib/modules/pcompress.ko': invalid module format insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format insmod: can't insert '/lib/modules/rng.ko': invalid module format insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format insmod: can't insert '/lib/modules/cryptd.ko': invalid module format insmod: can't insert '/lib/modules/aesni-intel.ko': No such device insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format insmod: can't insert '/lib/modules/synobios.ko': File exists Jul 10 17:59:02 syslogd started: BusyBox v1.16.1 Jul 10 17:59:02 kernel: [ 6.102917] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0) Jul 10 17:59:02 kernel: [ 6.128582] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) Jul 10 17:59:02 kernel: [ 6.160115] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel) Jul 10 17:59:02 kernel: [ 6.170948] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel) Jul 10 17:59:02 kernel: [ 6.179608] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel) Jul 10 17:59:02 kernel: [ 6.189816] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel) Jul 10 17:59:02 kernel: [ 6.201858] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel) Jul 10 17:59:02 kernel: [ 6.211766] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel) Jul 10 17:59:02 kernel: [ 6.220595] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel) Jul 10 17:59:02 kernel: [ 6.230363] cryptomgr: exports duplicate symbol alg_test (owned by kernel) Jul 10 17:59:02 kernel: [ 6.249399] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel) Jul 10 17:59:02 kernel: [ 6.259379] rng: exports duplicate symbol crypto_default_rng (owned by kernel) Jul 10 17:59:02 kernel: [ 6.310305] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel) Jul 10 17:59:02 kernel: [ 6.326304] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel) Jul 10 17:59:02 kernel: [ 6.357446] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel) Jul 10 17:59:02 kernel: [ 6.412183] libcrc32c: exports duplicate symbol crc32c (owned by kernel) Jul 10 17:59:02 kernel: [ 6.421773] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel) Jul 10 17:59:02 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab Jul 10 17:59:02 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: scemd.c:127 open /dev/synobios error! Jul 10 17:59:07 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used. Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 Jul 10 17:59:07 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 Jul 10 17:59:07 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 10 17:59:07 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set Jul 10 17:59:07 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20 Jul 10 17:59:07 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0 Jul 10 17:59:07 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 17:59:07 scemd: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 17:59:07 scemd: smartctl_enable.c:92 AtaSmartEnable failed. Jul 10 17:59:07 scemd: SmartDataRead(107) enable smart /dev/sda fail Jul 10 17:59:07 scemd: disk_temperature_get.c:71 read value /dev/sda fail Jul 10 17:59:07 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled. Jul 10 17:59:07 scemd: external_microp_id_check.c:44 Fail to open synobios platform error Jul 10 17:59:07 scemd: write to uart2 error, error=(5)Input/output error Jul 10 17:59:08 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory Jul 10 17:59:08 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd Jul 10 17:59:08 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56] Jul 10 17:59:08 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory Jul 10 17:59:08 kernel: [ 12.611226] 3w-9xxx: scsi0: ERROR: (0x03:0x0101): Invalid command opcode:opcode=0xA1. Jul 10 17:59:08 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd Jul 10 17:59:08 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id Jul 10 17:59:08 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 17:59:08 synocheckvolume: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 17:59:08 synocheckvolume: smartctl_enable.c:92 AtaSmartEnable failed. Jul 10 17:59:08 synocheckvolume: SmartDataRead(107) enable smart /dev/sda fail Jul 10 17:59:08 synocheckvolume: disk_temperature_get.c:71 read value /dev/sda fail Jul 10 17:59:08 synocheckshare: service_disable_set.c(68)Not defined date : id=4 Jul 10 17:59:08 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd Jul 10 17:59:08 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 17:59:08 syno_hdd_util: smartctl_ata_command_interface.c:117 ata ioctl HDIO_DRIVE_CMD error Jul 10 17:59:08 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] Jul 10 17:59:08 synousbdisk: RCClean succeeded Jul 10 17:59:08 synosata: synosata.c:152 no external sata devices granted Jul 10 17:59:09 synoexternal: write to uart2 error, error=(5)Input/output error killall: synolunbkp: no process killed Jul 10 17:59:10 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon Jul 10 17:59:10 kernel: [ 14.885289] Got empty serial number. Generate serial number from product. Jul 10 17:59:11 synoexternal: write to uart2 error, error=(5)Input/output error Jul 10 17:59:12 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab Jul 10 17:59:13 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance Jul 10 17:59:13 avahi-daemon[6678]: Failed to add service 'nas' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record Jul 10 17:59:13 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2 Jul 10 17:59:13 hotplugd: ##### ACTION:add Jul 10 17:59:13 hotplugd: DEVICE:/proc/bus/usb/001/001 Jul 10 17:59:13 hotplugd: DEVPATH:usb1 Jul 10 17:59:13 hotplugd: SUBSYSTEM:usb Jul 10 17:59:14 kernel: [ 19.250124] sd 8:0:0:0: [sdu] No Caching mode page present Jul 10 17:59:14 kernel: [ 19.250246] sd 8:0:0:0: [sdu] Assuming drive cache: write through Jul 10 17:59:14 kernel: [ 19.257165] sd 8:0:0:0: [sdu] No Caching mode page present Jul 10 17:59:14 kernel: [ 19.257300] sd 8:0:0:0: [sdu] Assuming drive cache: write through Jul 10 17:59:15 syno_poweroff_task: volume_parts_info_get_by_dev.c:92 Dev:sdu cannot find PostfixNumber. Jul 10 17:59:15 kernel: [ 19.653629] sd 8:0:0:0: [sdu] No Caching mode page present Jul 10 17:59:15 kernel: [ 19.653760] sd 8:0:0:0: [sdu] Assuming drive cache: write through Jul 10 17:59:15 syno_poweroff_task: usbbkp_hot_pull_out_ex.c:108 Remove /tmp/usbtab [sdu] failed. (0x2000) Jul 10 17:59:15 syslogd exiting I hope this helps.

this is from /var/run/dmesg.boot [ 0.000000] Linux version 3.2.11 (root@debian) (gcc version 4.2.0) #4 SMP Sat Jul 6 17:38:11 CEST 2013 [ 0.000000] Command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs mac1=00113208d62a mac2=00113208d62b mac3=000a70523d02 mac4=000a70523d03 sn=B5JDN00000 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable) [ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000006ec3c000 (usable) [ 0.000000] BIOS-e820: 000000006ec3c000 - 000000006ec90000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ec90000 - 000000006ecb1000 (reserved) [ 0.000000] BIOS-e820: 000000006ecb1000 - 000000006ecc2000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ecc2000 - 000000006ecd8000 (reserved) [ 0.000000] BIOS-e820: 000000006ecd8000 - 000000006ecd9000 (usable) [ 0.000000] BIOS-e820: 000000006ecd9000 - 000000006ecda000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ecda000 - 000000006ecdd000 (reserved) [ 0.000000] BIOS-e820: 000000006ecdd000 - 000000006ece4000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ece4000 - 000000006ed48000 (reserved) [ 0.000000] BIOS-e820: 000000006ed48000 - 000000006ed8b000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000006ed8b000 - 000000006ef00000 (usable) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved) [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.6 present. [ 0.000000] DMI: System manufacturer System Product Name/E45M1-M PRO, BIOS 1202 08/07/2012 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x6ef00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF write-through [ 0.000000] C0000-CEFFF write-protect [ 0.000000] CF000-E7FFF uncachable [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 06EF00000 mask FFFF00000 uncachable [ 0.000000] 2 base 06F000000 mask FFF000000 uncachable [ 0.000000] 3 base 070000000 mask FF0000000 uncachable [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] found SMP MP-table at [ffff8800000fce20] fce20 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-000000006ef00000 [ 0.000000] 0000000000 - 0040000000 page 1G [ 0.000000] 0040000000 - 006ee00000 page 2M [ 0.000000] 006ee00000 - 006ef00000 page 4k [ 0.000000] kernel direct mapping tables up to 6ef00000 @ 1fffd000-20000000 [ 0.000000] RAMDISK: 6e691000 - 6ec2c000 [ 0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 ALASKA) [ 0.000000] ACPI: XSDT 000000006ec85068 00054 (v01 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 000000006ec8b2e8 000F4 (v04 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110623/tbfadt-560) [ 0.000000] ACPI: DSDT 000000006ec85150 06192 (v02 ALASKA A M I 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 000000006ece3f80 00040 [ 0.000000] ACPI: APIC 000000006ec8b3e0 00062 (v03 ALASKA A M I 01072009 AMI 00010013) [ 0.000000] ACPI: MCFG 000000006ec8b448 0003C (v01 ALASKA A M I 01072009 MSFT 00010013) [ 0.000000] ACPI: HPET 000000006ec8b488 00038 (v01 ALASKA A M I 01072009 AMI 00000004) [ 0.000000] ACPI: SSDT 000000006ec8b4c0 003DE (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 000000006ec8b8a0 0168E (v02 AMD ALIB 00000001 MSFT 04000000) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00019fffff] PMD -> [ffff88006c200000-ffff88006dbfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[4] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x0006ec3c [ 0.000000] 0: 0x0006ecd8 -> 0x0006ecd9 [ 0.000000] 0: 0x0006ed8b -> 0x0006ef00 [ 0.000000] On node 0 totalpages: 453951 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3920 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 6157 pages used for memmap [ 0.000000] DMA32 zone: 443813 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000006ec3c000 - 000000006ec90000 [ 0.000000] PM: Registered nosave memory: 000000006ec90000 - 000000006ecb1000 [ 0.000000] PM: Registered nosave memory: 000000006ecb1000 - 000000006ecc2000 [ 0.000000] PM: Registered nosave memory: 000000006ecc2000 - 000000006ecd8000 [ 0.000000] PM: Registered nosave memory: 000000006ecd9000 - 000000006ecda000 [ 0.000000] PM: Registered nosave memory: 000000006ecda000 - 000000006ecdd000 [ 0.000000] PM: Registered nosave memory: 000000006ecdd000 - 000000006ece4000 [ 0.000000] PM: Registered nosave memory: 000000006ece4000 - 000000006ed48000 [ 0.000000] PM: Registered nosave memory: 000000006ed48000 - 000000006ed8b000 [ 0.000000] Allocating PCI resources starting at 6ef00000 (gap: 6ef00000:8fd00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88006e400000 s69824 r8192 d24384 u1048576 [ 0.000000] pcpu-alloc: s69824 r8192 d24384 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 447733 [ 0.000000] Kernel command line: root=/dev/md0 ihd_num=0 netif_num=4 syno_hw_version=DS3612xs mac1=00113208d62a mac2=00113208d62b mac3=000a70523d02 mac4=000a70523d03 sn=B5JDN00000 [ 0.000000] Internal HD num: 0 [ 0.000000] Internal netif num: 4 [ 0.000000] Synology Hareware Version: DS3612xs-j [ 0.000000] Mac1: 00113208d62a [ 0.000000] Mac2: 00113208d62b [ 0.000000] Mac3: 000a70523d02 [ 0.000000] Mac4: 000a70523d03 [ 0.000000] Serial Number: B5JDN00000 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 1770356k/1817600k available (4737k kernel code, 1796k absent, 45448k reserved, 3845k data, 428k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1650.121 MHz processor. [ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3300.24 BogoMIPS (lpj=1650121) [ 0.001271] pid_max: default: 32768 minimum: 301 [ 0.001488] Mount-cache hash table entries: 256 [ 0.002149] tseg: 006ef00000 [ 0.002153] CPU: Physical Processor ID: 0 [ 0.002286] CPU: Processor Core ID: 0 [ 0.002417] mce: CPU supports 6 MCE banks [ 0.002628] ACPI: Core revision 20110623 [ 0.008816] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.018970] CPU0: AMD E-450 APU with Radeon(tm) HD Graphics stepping 00 [ 0.019998] Performance Events: AMD PMU driver. [ 0.019998] ... version: 0 [ 0.019998] ... bit width: 48 [ 0.019998] ... generic registers: 4 [ 0.019998] ... value mask: 0000ffffffffffff [ 0.019998] ... max period: 00007fffffffffff [ 0.019998] ... fixed-purpose events: 0 [ 0.019998] ... event mask: 000000000000000f [ 0.020290] Booting Node 0, Processors #1 Ok. [ 0.020475] smpboot cpu 1: start_ip = 98000 [ 0.092008] Brought up 2 CPUs [ 0.092163] Total of 2 processors activated (6599.80 BogoMIPS). [ 0.093207] PM: Registering ACPI NVS region at 6ec3c000 (344064 bytes) [ 0.093373] PM: Registering ACPI NVS region at 6ecb1000 (69632 bytes) [ 0.093503] PM: Registering ACPI NVS region at 6ecd9000 (4096 bytes) [ 0.093631] PM: Registering ACPI NVS region at 6ecdd000 (28672 bytes) [ 0.093774] PM: Registering ACPI NVS region at 6ed48000 (274432 bytes) [ 0.094104] xor: automatically using best checksumming function: generic_sse [ 0.098994] generic_sse: 3284.000 MB/sec [ 0.099121] xor: using function: generic_sse (3284.000 MB/sec) [ 0.099332] NET: Registered protocol family 16 [ 0.100156] Extended Config Space enabled on 0 nodes [ 0.100339] ACPI: bus type pci registered [ 0.101073] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.101271] PCI: not using MMCONFIG [ 0.101396] PCI: Using configuration type 1 for base access [ 0.101536] PCI: Using configuration type 1 for extended access [ 0.115128] bio: create slab at 0 [ 0.132874] raid6: int64x1 855 MB/s [ 0.149892] raid6: int64x2 960 MB/s [ 0.166875] raid6: int64x4 941 MB/s [ 0.183925] raid6: int64x8 800 MB/s [ 0.200851] raid6: sse2x1 1394 MB/s [ 0.217875] raid6: sse2x2 1632 MB/s [ 0.234844] raid6: sse2x4 2335 MB/s [ 0.234976] raid6: using algorithm sse2x4 (2335 MB/s) [ 0.235126] ACPI: Added _OSI(Module Device) [ 0.235268] ACPI: Added _OSI(Processor Device) [ 0.235395] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.235538] ACPI: Added _OSI(Processor Aggregator Device) [ 0.236874] ACPI: EC: Look up EC in DSDT [ 0.238808] ACPI: Executed 3 blocks of module-level executable AML code [ 0.242792] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110623/psargs-359) [ 0.242978] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110623/nsinit-349) [ 0.246570] ACPI: Interpreter enabled [ 0.246697] ACPI: (supports S0 S4 S5) [ 0.246982] ACPI: Using IOAPIC for interrupt routing [ 0.247382] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.247671] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.285166] ACPI: No dock devices found. [ 0.285336] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.285827] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.286414] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.286576] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.286707] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.287009] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff] [ 0.287246] pci_root PNP0A08:00: host bridge window [mem 0x7f000000-0xffffffff] [ 0.287442] pci_root PNP0A08:00: ignoring host bridge window [mem 0x000c8000-0x000dffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]) [ 0.287652] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600 [ 0.287709] pci 0000:00:01.0: [1002:9806] type 0 class 0x000300 [ 0.287725] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref] [ 0.287735] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff] [ 0.287745] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff] [ 0.287803] pci 0000:00:01.0: supports D1 D2 [ 0.287827] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403 [ 0.287839] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff] [ 0.287906] pci 0000:00:01.1: supports D1 D2 [ 0.287987] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604 [ 0.288059] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.288066] pci 0000:00:04.0: PME# disabled [ 0.288113] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106 [ 0.288139] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147] [ 0.288153] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133] [ 0.288166] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127] [ 0.288179] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113] [ 0.288192] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f] [ 0.288205] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff] [ 0.288282] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.288302] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff] [ 0.288393] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.288418] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff] [ 0.288520] pci 0000:00:12.2: supports D1 D2 [ 0.288524] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.288530] pci 0000:00:12.2: PME# disabled [ 0.288559] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.288578] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff] [ 0.288669] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.288695] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff] [ 0.288797] pci 0000:00:13.2: supports D1 D2 [ 0.288800] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.288807] pci 0000:00:13.2: PME# disabled [ 0.288836] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.288935] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.289036] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.289093] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.289112] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff] [ 0.289206] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604 [ 0.289305] pci 0000:00:15.0: supports D1 D2 [ 0.289340] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604 [ 0.289438] pci 0000:00:15.1: supports D1 D2 [ 0.289474] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604 [ 0.289572] pci 0000:00:15.2: supports D1 D2 [ 0.289609] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03 [ 0.289627] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff] [ 0.289720] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03 [ 0.289746] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff] [ 0.289848] pci 0000:00:16.2: supports D1 D2 [ 0.289852] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot [ 0.289858] pci 0000:00:16.2: PME# disabled [ 0.289889] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600 [ 0.289939] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600 [ 0.289991] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600 [ 0.290039] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600 [ 0.290097] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600 [ 0.290142] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600 [ 0.290187] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600 [ 0.290231] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600 [ 0.290359] pci 0000:01:00.0: [13c1:1004] type 0 class 0x000104 [ 0.290380] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.290397] pci 0000:01:00.0: reg 18: [mem 0xfea20000-0xfea20fff 64bit] [ 0.290409] pci 0000:01:00.0: reg 20: [io 0xe000-0xe0ff] [ 0.290428] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] [ 0.290472] pci 0000:01:00.0: supports D1 D2 [ 0.292033] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.292209] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 0.292216] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.292225] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.292308] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode) [ 0.292437] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.292442] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.292448] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.292454] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xffffffff] (subtractive decode) [ 0.292521] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.292756] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200 [ 0.292783] pci 0000:04:00.0: reg 10: [io 0xd000-0xd0ff] [ 0.292821] pci 0000:04:00.0: reg 18: [mem 0xd2004000-0xd2004fff 64bit pref] [ 0.292847] pci 0000:04:00.0: reg 20: [mem 0xd2000000-0xd2003fff 64bit pref] [ 0.292951] pci 0000:04:00.0: supports D1 D2 [ 0.292955] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.292985] pci 0000:04:00.0: PME# disabled [ 0.294998] pci 0000:00:15.1: PCI bridge to [bus 04-04] [ 0.295154] pci 0000:00:15.1: bridge window [io 0xd000-0xdfff] [ 0.295165] pci 0000:00:15.1: bridge window [mem 0xd2000000-0xd20fffff 64bit pref] [ 0.295251] pci 0000:05:00.0: [1b21:1080] type 1 class 0x000604 [ 0.295389] pci 0000:00:15.2: PCI bridge to [bus 05-06] [ 0.295536] pci 0000:00:15.2: bridge window [io 0xc000-0xcfff] [ 0.295542] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.295622] pci 0000:06:02.0: [1106:3044] type 0 class 0x000c00 [ 0.295659] pci 0000:06:02.0: reg 10: [mem 0xfe900000-0xfe9007ff] [ 0.295680] pci 0000:06:02.0: reg 14: [io 0xc000-0xc07f] [ 0.295823] pci 0000:06:02.0: supports D2 [ 0.295826] pci 0000:06:02.0: PME# supported from D2 D3hot D3cold [ 0.295835] pci 0000:06:02.0: PME# disabled [ 0.295919] pci 0000:05:00.0: PCI bridge to [bus 06-06] (subtractive decode) [ 0.295977] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] [ 0.295985] pci 0000:05:00.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.295999] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] (subtractive decode) [ 0.296003] pci 0000:05:00.0: bridge window [mem 0xfe900000-0xfe9fffff] (subtractive decode) [ 0.296008] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.296013] pci 0000:05:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode) [ 0.296060] pci_bus 0000:00: on NUMA node 0 [ 0.296072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.296406] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] [ 0.296466] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT] [ 0.296524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT] [ 0.296590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT] [ 0.296650] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22.BR23._PRT] [ 0.296741] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.296974] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.297196] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.310125] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0 [ 0.311107] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0 [ 0.311751] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0 [ 0.312429] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0 [ 0.313054] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0 [ 0.313635] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0 [ 0.314211] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0 [ 0.314805] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0 [ 0.315447] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none [ 0.315990] vgaarb: loaded [ 0.316147] vgaarb: bridge control possible 0000:00:01.0 [ 0.316441] SCSI subsystem initialized [ 0.317040] libata version 3.00 loaded. [ 0.317040] PCI: Using ACPI for IRQ routing [ 0.328653] PCI: pci_cache_line_size set to 64 bytes [ 0.328806] reserve RAM buffer: 000000000009d800 - 000000000009ffff [ 0.328811] reserve RAM buffer: 000000006ec3c000 - 000000006fffffff [ 0.328818] reserve RAM buffer: 000000006ecd9000 - 000000006fffffff [ 0.328823] reserve RAM buffer: 000000006ef00000 - 000000006fffffff [ 0.329106] Switching to clocksource hpet [ 0.329220] pnp: PnP ACPI init [ 0.329318] ACPI: bus type pnp registered [ 0.329789] pnp 00:00: [bus 00-ff] [ 0.329794] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.329798] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.329803] pnp 00:00: [io 0x0d00-0xffff window] [ 0.329807] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.329811] pnp 00:00: [mem 0x000c8000-0x000dffff window] [ 0.329815] pnp 00:00: [mem 0x7f000000-0xffffffff window] [ 0.329818] pnp 00:00: [mem 0x00000000 window] [ 0.329966] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.330055] pnp 00:01: [mem 0xe0000000-0xefffffff] [ 0.330206] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved [ 0.330350] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.331186] pnp 00:02: [io 0x040b] [ 0.331190] pnp 00:02: [io 0x04d6] [ 0.331194] pnp 00:02: [io 0x0c00-0x0c01] [ 0.331198] pnp 00:02: [io 0x0c14] [ 0.331201] pnp 00:02: [io 0x0c50-0x0c51] [ 0.331205] pnp 00:02: [io 0x0c52] [ 0.331208] pnp 00:02: [io 0x0c6c] [ 0.331211] pnp 00:02: [io 0x0c6f] [ 0.331214] pnp 00:02: [io 0x0cd0-0x0cd1] [ 0.331218] pnp 00:02: [io 0x0cd2-0x0cd3] [ 0.331221] pnp 00:02: [io 0x0cd4-0x0cd5] [ 0.331224] pnp 00:02: [io 0x0cd6-0x0cd7] [ 0.331228] pnp 00:02: [io 0x0cd8-0x0cdf] [ 0.331231] pnp 00:02: [io 0x0800-0x089f] [ 0.331235] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled] [ 0.331239] pnp 00:02: [io 0x0000-0x000f] [ 0.331242] pnp 00:02: [io 0x0b20-0x0b3f] [ 0.331245] pnp 00:02: [io 0x0900-0x090f] [ 0.331249] pnp 00:02: [io 0x0910-0x091f] [ 0.331252] pnp 00:02: [io 0xfe00-0xfefe] [ 0.331256] pnp 00:02: [io 0x0060-0x005f disabled] [ 0.331259] pnp 00:02: [io 0x0064-0x0063 disabled] [ 0.331264] pnp 00:02: [mem 0xfec00000-0xfec00fff] [ 0.331267] pnp 00:02: [mem 0xfee00000-0xfee00fff] [ 0.331271] pnp 00:02: [mem 0xfed80000-0xfed8ffff] [ 0.331277] pnp 00:02: [mem 0xfed61000-0xfed70fff] [ 0.331280] pnp 00:02: [mem 0xfec10000-0xfec10fff] [ 0.331284] pnp 00:02: [mem 0xfed00000-0xfed00fff] [ 0.331288] pnp 00:02: [mem 0xffc00000-0xffffffff] [ 0.331523] system 00:02: [io 0x040b] has been reserved [ 0.331667] system 00:02: [io 0x04d6] has been reserved [ 0.331809] system 00:02: [io 0x0c00-0x0c01] has been reserved [ 0.331939] system 00:02: [io 0x0c14] has been reserved [ 0.332083] system 00:02: [io 0x0c50-0x0c51] has been reserved [ 0.332228] system 00:02: [io 0x0c52] has been reserved [ 0.332357] system 00:02: [io 0x0c6c] has been reserved [ 0.332485] system 00:02: [io 0x0c6f] has been reserved [ 0.332628] system 00:02: [io 0x0cd0-0x0cd1] has been reserved [ 0.332772] system 00:02: [io 0x0cd2-0x0cd3] has been reserved [ 0.332906] system 00:02: [io 0x0cd4-0x0cd5] has been reserved [ 0.333040] system 00:02: [io 0x0cd6-0x0cd7] has been reserved [ 0.333160] system 00:02: [io 0x0cd8-0x0cdf] has been reserved [ 0.333296] system 00:02: [io 0x0800-0x089f] has been reserved [ 0.333431] system 00:02: [io 0x0b20-0x0b3f] has been reserved [ 0.333551] system 00:02: [io 0x0900-0x090f] has been reserved [ 0.333669] system 00:02: [io 0x0910-0x091f] has been reserved [ 0.333806] system 00:02: [io 0xfe00-0xfefe] has been reserved [ 0.333927] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.334061] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.334197] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved [ 0.334334] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved [ 0.334455] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved [ 0.334575] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved [ 0.334699] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved [ 0.334836] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.335065] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.335070] pnp 00:03: [io 0x0000-0xffffffffffffffff disabled] [ 0.335074] pnp 00:03: [io 0x0290-0x029f] [ 0.335078] pnp 00:03: [io 0x0a20-0x0a2f] [ 0.335205] system 00:03: [io 0x0290-0x029f] has been reserved [ 0.335342] system 00:03: [io 0x0a20-0x0a2f] has been reserved [ 0.335462] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.335738] pnp 00:04: [dma 4] [ 0.335742] pnp 00:04: [io 0x0000-0x000f] [ 0.335745] pnp 00:04: [io 0x0081-0x0083] [ 0.335749] pnp 00:04: [io 0x0087] [ 0.335752] pnp 00:04: [io 0x0089-0x008b] [ 0.335755] pnp 00:04: [io 0x008f] [ 0.335758] pnp 00:04: [io 0x00c0-0x00df] [ 0.335924] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.335955] pnp 00:05: [io 0x0070-0x0071] [ 0.335975] pnp 00:05: [irq 8] [ 0.336144] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.336164] pnp 00:06: [io 0x0061] [ 0.336292] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.336356] pnp 00:07: [io 0x0010-0x001f] [ 0.336360] pnp 00:07: [io 0x0022-0x003f] [ 0.336364] pnp 00:07: [io 0x0044-0x005f] [ 0.336367] pnp 00:07: [io 0x0072-0x007f] [ 0.336371] pnp 00:07: [io 0x0080] [ 0.336374] pnp 00:07: [io 0x0084-0x0086] [ 0.336377] pnp 00:07: [io 0x0088] [ 0.336380] pnp 00:07: [io 0x008c-0x008e] [ 0.336383] pnp 00:07: [io 0x0090-0x009f] [ 0.336386] pnp 00:07: [io 0x00a2-0x00bf] [ 0.336389] pnp 00:07: [io 0x00e0-0x00ef] [ 0.336393] pnp 00:07: [io 0x04d0-0x04d1] [ 0.336573] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 0.336697] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.336716] pnp 00:08: [io 0x00f0-0x00ff] [ 0.336733] pnp 00:08: [irq 13] [ 0.336909] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.337096] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.337146] pnp 00:0a: [io 0x0060] [ 0.337149] pnp 00:0a: [io 0x0064] [ 0.337174] pnp 00:0a: [irq 1] [ 0.337281] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active) [ 0.337680] pnp 00:0b: [mem 0x6f000000-0x7effffff] [ 0.337898] system 00:0b: [mem 0x6f000000-0x7effffff] could not be reserved [ 0.338065] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.338336] pnp 00:0c: [mem 0xfed00000-0xfed003ff] [ 0.338475] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.338487] pnp: PnP ACPI: found 13 devices [ 0.338621] ACPI: ACPI bus type pnp unregistered [ 0.351473] PCI: max bus depth: 2 pci_try_num: 3 [ 0.351546] pci 0000:00:04.0: PCI bridge to [bus 01-01] [ 0.351683] pci 0000:00:04.0: bridge window [io 0xe000-0xefff] [ 0.351829] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff] [ 0.351962] pci 0000:00:04.0: bridge window [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.352233] pci 0000:00:14.4: PCI bridge to [bus 02-02] [ 0.352376] pci 0000:00:15.0: PCI bridge to [bus 03-03] [ 0.352514] pci 0000:00:15.1: PCI bridge to [bus 04-04] [ 0.352658] pci 0000:00:15.1: bridge window [io 0xd000-0xdfff] [ 0.352809] pci 0000:00:15.1: bridge window [mem 0xd2000000-0xd20fffff 64bit pref] [ 0.353038] pci 0000:05:00.0: PCI bridge to [bus 06-06] [ 0.353159] pci 0000:05:00.0: bridge window [io 0xc000-0xcfff] [ 0.353301] pci 0000:05:00.0: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.353448] pci 0000:00:15.2: PCI bridge to [bus 05-06] [ 0.353567] pci 0000:00:15.2: bridge window [io 0xc000-0xcfff] [ 0.353690] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff] [ 0.353866] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.353989] pci 0000:00:04.0: setting latency timer to 64 [ 0.354016] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354149] pci 0000:00:15.0: setting latency timer to 64 [ 0.354159] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354295] pci 0000:00:15.1: setting latency timer to 64 [ 0.354305] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.354442] pci 0000:00:15.2: setting latency timer to 64 [ 0.354460] pci 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.354583] pci 0000:05:00.0: setting latency timer to 64 [ 0.354591] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.354595] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.354599] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.354603] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff] [ 0.354607] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 0.354611] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff] [ 0.354616] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xd1ffffff 64bit pref] [ 0.354620] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] [ 0.354624] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] [ 0.354628] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] [ 0.354632] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff] [ 0.354637] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff] [ 0.354641] pci_bus 0000:04: resource 2 [mem 0xd2000000-0xd20fffff 64bit pref] [ 0.354645] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 0.354649] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.354653] pci_bus 0000:06: resource 0 [io 0xc000-0xcfff] [ 0.354657] pci_bus 0000:06: resource 1 [mem 0xfe900000-0xfe9fffff] [ 0.354661] pci_bus 0000:06: resource 4 [io 0xc000-0xcfff] [ 0.354665] pci_bus 0000:06: resource 5 [mem 0xfe900000-0xfe9fffff] [ 0.354803] NET: Registered protocol family 2 [ 0.355049] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.355793] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.358263] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.359035] TCP: Hash tables configured (established 262144 bind 65536) [ 0.359170] TCP reno registered [ 0.359313] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.359463] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.359781] NET: Registered protocol family 1 [ 0.360198] RPC: Registered named UNIX socket transport module. [ 0.360352] RPC: Registered udp transport module. [ 0.360478] RPC: Registered tcp transport module. [ 0.360620] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.360779] pci 0000:00:01.0: Boot video device [ 0.360812] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.180249] pci 0000:00:12.0: PCI INT A disabled [ 1.180453] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.180610] pci 0000:00:12.2: PCI INT B disabled [ 1.180760] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.253250] pci 0000:00:13.0: PCI INT A disabled [ 1.253434] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.253594] pci 0000:00:13.2: PCI INT B disabled [ 1.253755] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.326249] pci 0000:00:14.5: PCI INT C disabled [ 1.326442] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.398259] pci 0000:00:16.0: PCI INT A disabled [ 1.398439] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.398610] pci 0000:00:16.2: PCI INT B disabled [ 1.398793] PCI: CLS 64 bytes, default 64 [ 1.398897] Trying to unpack rootfs image as initramfs... [ 1.399311] rootfs image is not initramfs (no cpio magic); looks like an initrd [ 1.405887] Freeing initrd memory: 5740k freed [ 1.411318] perf: AMD IBS detected (0x000000ff) [ 1.412718] Intel AES-NI instructions are not detected. [ 1.412870] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation [ 1.421091] VFS: Disk quotas dquot_6.5.2 [ 1.421335] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.422158] msgmni has been set to 3468 [ 1.422994] async_tx: api initialized (async) [ 1.423384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.423607] io scheduler noop registered [ 1.423778] io scheduler cfq registered (default) [ 1.477399] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 1.501188] brd: module loaded [ 1.501610] Loading iSCSI transport class v2.0-870. [ 1.503026] rdac: device handler registered [ 1.503736] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded [ 1.504082] isci: Intel(R) C600 SAS Controller Driver - version 1.0.0 [ 1.504807] iscsi: registered transport (qla4xxx) [ 1.505153] QLogic iSCSI HBA Driver [ 1.505383] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011 [ 1.505716] mpt2sas version 11.100.00.00 loaded [ 1.506115] 3ware Storage Controller device driver for Linux v1.26.02.003. [ 1.506341] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ 1.506592] 3w-9xxx 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.506739] 3w-9xxx 0000:01:00.0: setting latency timer to 64 [ 1.711238] scsi0 : 3ware 9000 Storage Controller [ 1.712336] 3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16. [ 2.018243] 3w-9xxx: scsi0: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8. [ 2.029972] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000. [ 2.030404] RocketRAID 3xxx/4xxx Controller driver v1.6 (090910) [ 2.030816] VMware PVSCSI driver - version 1.0.1.0-k [ 2.031590] ahci 0000:00:11.0: version 3.0 [ 2.031647] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.031984] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.032234] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.036082] scsi1 : ahci [ 2.036631] scsi2 : ahci [ 2.037318] scsi3 : ahci [ 2.037864] scsi4 : ahci [ 2.038549] scsi5 : ahci [ 2.039164] scsi6 : ahci [ 2.039729] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19 [ 2.039959] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19 [ 2.040227] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19 [ 2.040446] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19 [ 2.043286] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19 [ 2.043493] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19 [ 2.043697] Enable Synology sata fast booting [ 2.412124] Refined TSC clocksource calibration: 1649.962 MHz. [ 2.412292] Switching to clocksource tsc [ 3.875587] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de [ 3.875998] Atheros(R) L2 Ethernet Driver - version 2.2.3 [ 3.876211] Copyright (c) 2007 Atheros Corporation. [ 3.876642] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.7 (July 20, 2011) [ 3.876947] bnx2x: Broadcom NetXtreme II 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.70.30-0 (2011/10/25) [ 3.877510] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 3.877673] e100: Copyright(c) 1999-2006 Intel Corporation [ 3.877904] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3.878109] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3.878543] Intel(R) Gigabit Ethernet Network Driver - version 3.2.10-k [ 3.878713] Copyright (c) 2007-2011 Intel Corporation. [ 3.878971] jme: JMicron JMC2XX ethernet driver version 1.0.8 [ 3.879439] sky2: driver version 1.30 [ 3.879835] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25 [ 3.880837] VMware vmxnet3 virtual NIC driver - version 1.1.18.0-k-NAPI [ 3.881383] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.881548] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.882633] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.882987] rtc_cmos 00:05: RTC can wake from S4 [ 3.883435] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.883634] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.883842] i2c /dev entries driver [ 3.884296] md: linear personality registered for level -1 [ 3.884449] md: raid0 personality registered for level 0 [ 3.884591] md: raid1 personality registered for level 1 [ 3.884734] md: raid10 personality registered for level 10 [ 3.884876] md: raid6 personality registered for level 6 [ 3.885064] md: raid5 personality registered for level 5 [ 3.885222] md: raid4 personality registered for level 4 [ 3.885715] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 3.885990] cpuidle: using governor ladder [ 3.886176] cpuidle: using governor menu [ 3.886653] TCP cubic registered [ 3.886802] NET: Registered protocol family 17 [ 3.887812] rtc_cmos 00:05: setting system clock to 2013-07-09 19:49:15 UTC (1373399355) [ 4.178259] ata4: SATA link down (SStatus 0 SControl 300) [ 4.178474] ata2: SATA link down (SStatus 0 SControl 300) [ 4.178651] ata3: SATA link down (SStatus 0 SControl 300) [ 4.178836] ata5: SATA link down (SStatus 0 SControl 300) [ 4.179150] ata6: SATA link down (SStatus 0 SControl 300) [ 4.333272] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.333917] ata1.00: ATA-8: STT_FTM32GX25H, 1819, max UDMA/133 [ 4.334101] ata1.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32), AA [ 4.336194] ata1.00: configured for UDMA/133 [ 4.336457] ata1.00: Find SSD disks. [sTT_FTM32GX25H] [ 4.336913] scsi 1:0:0:0: Direct-Access ATA STT_FTM32GX25H 1819 PQ: 0 ANSI: 5 [ 4.337904] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 4.338304] sd 1:0:0:0: [sdb] Write Protect is off [ 4.338466] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 4.338521] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.339524] sdb: sdb1 sdb2 [ 4.340755] sd 1:0:0:0: [sdb] Attached SCSI disk [ 4.340965] md: Waiting for all devices to be available before autodetect [ 4.341148] md: If you don't use raid, use raid=noautodetect [ 4.341761] md: Autodetecting RAID arrays. [ 4.342454] md: Scanned 2 and added 2 devices. [ 4.342622] md: autorun ... [ 4.342759] md: considering sdb1 ... [ 4.342905] md: adding sdb1 ... [ 4.343072] md: sdb2 has different UUID to sdb1 [ 4.343219] md: created md0 [ 4.343359] md: bind [ 4.343514] md: running: [ 4.344016] bio: create slab at 1 [ 4.344342] md/raid1:md0: active with 1 out of 12 mirrors [ 4.344542] md0: detected capacity change from 0 to 2549940224 [ 4.344785] md: considering sdb2 ... [ 4.344943] md: adding sdb2 ... [ 4.345353] md: created md1 [ 4.345501] md: bind [ 4.345645] md: running: [ 4.346178] md/raid1:md1: active with 1 out of 12 mirrors [ 4.346384] md1: detected capacity change from 0 to 2147418112 [ 4.346678] md: ... autorun DONE. [ 4.347170] md1: unknown partition table [ 4.347595] RAMDISK: gzip image found at block 0 [ 4.609302] VFS: Mounted root (ext2 filesystem) on device 1:0. [ 4.625252] e1000e: Intel(R) PRO/1000 Network Driver - 2.4.14-NAPI [ 4.625417] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [ 4.638776] r8168 Gigabit Ethernet driver 8.036.00-NAPI loaded [ 4.638996] r8168 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.639184] r8168 0000:04:00.0: setting latency timer to 64 [ 4.639279] r8168 0000:04:00.0: irq 40 for MSI/MSI-X [ 4.650222] eth%d: 0xffffc9000005a000, 60:a4:4c:b2:96:b5, IRQ 40 [ 4.652918] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625. [ 4.653198] r8168 Copyright (C) 2013 Realtek NIC software team [ 4.653201] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . [ 4.653203] This is free software, and you are welcome to redistribute it under certain conditions; see . [ 4.657300] bromolow_synobios: module license 'Synology Inc.' taints kernel. [ 4.657468] Disabling lock debugging due to kernel taint [ 4.661396] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 [ 4.661711] IP: [] syno_libata_index_get_by_map+0x36/0x83 [ 4.661905] PGD 6aeec067 PUD 6dfb3067 PMD 0 [ 4.662005] Oops: 0000 [#1] SMP [ 4.662005] CPU 0 [ 4.662005] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O) [ 4.662005] [ 4.662005] Pid: 1262, comm: insmod Tainted: P O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO [ 4.662005] RIP: 0010:[] [] syno_libata_index_get_by_map+0x36/0x83 [ 4.662005] RSP: 0018:ffff88006df6fd48 EFLAGS: 00010286 [ 4.662005] RAX: 0000000000000000 RBX: ffff88006df6fd58 RCX: 0000000000000000 [ 4.662005] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006df6fd58 [ 4.662005] RBP: ffff88006df78000 R08: ffffffff81921c60 R09: 0000000000000000 [ 4.662005] R10: ffff88006ac10000 R11: 0000000000000016 R12: 0000000000000000 [ 4.662005] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016 [ 4.662005] FS: 0000000000000000(0000) GS:ffff88006e400000(0000) knlGS:0000000000000000 [ 4.662005] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 4.662005] CR2: 0000000000000068 CR3: 000000006b244000 CR4: 00000000000006f0 [ 4.662005] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4.662005] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 4.662005] Process insmod (pid: 1262, threadinfo ffff88006df6e000, task ffff88006ddd2bb0) [ 4.662005] Stack: [ 4.662005] ffff88006df78000 ffffffff812077f8 0000000000000000 ffffffffa009f720 [ 4.662005] ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720 [ 4.662005] 0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4 [ 4.662005] Call Trace: [ 4.662005] [] ? scsi_host_lookup+0x46/0x4e [ 4.662005] [] ? syno_libata_disk_map_table_gen+0x43/0x92 [ 4.662005] [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios] [ 4.662005] [] ? synobios_model_init+0x54/0x190 [bromolow_synobios] [ 4.662005] [] ? synobios_init+0x44/0x2d0 [bromolow_synobios] [ 4.662005] [] ? do_one_initcall+0x79/0x127 [ 4.662005] [] ? sys_init_module+0x104a/0x11ef [ 4.662005] [] ? fput+0x175/0x196 [ 4.662005] [] ? filp_close+0x64/0x6c [ 4.662005] [] ? system_call_fastpath+0x16/0x1b [ 4.662005] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 [ 4.662005] RIP [] syno_libata_index_get_by_map+0x36/0x83 [ 4.662005] RSP [ 4.662005] CR2: 0000000000000068 [ 4.671925] ---[ end trace cae5b573fff8f57c ]--- [ 4.706453] md0: unknown partition table [ 4.994118] EXT4-fs (md0): barriers disabled [ 4.994952] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: [ 5.046092] synoacl module [synoacl_ext4] is not loaded [ 5.046249] synoacl module [synoacl_vfs] is not loaded [ 5.059500] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0) [ 5.074956] EXT4-fs (md0): mounted filesystem with ordered data mode. Opts: barrier=1 [ 5.075230] VFS: Mounted root (ext4 filesystem) readonly on device 9:0. [ 5.075377] Trying to move old root to /initrd ... okay [ 5.078298] Freeing unused kernel memory: 428k freed [ 5.078646] Write protecting the kernel read-only data: 8192k [ 5.086783] Freeing unused kernel memory: 1388k freed [ 5.088941] Freeing unused kernel memory: 196k freed [ 5.119043] EXT4-fs (md0): re-mounted. Opts: (null)

this is from /var/log/messages insmod: can't insert '/lib/modules/acpi-cpufreq.ko': unknown symbol in module, or unknown parameter insmod: can't insert '/lib/modules/mdio.ko': invalid module format insmod: can't insert '/lib/modules/crypto.ko': invalid module format insmod: can't insert '/lib/modules/crypto_algapi.ko': invalid module format insmod: can't insert '/lib/modules/crypto_wq.ko': invalid module format insmod: can't insert '/lib/modules/crypto_blkcipher.ko': invalid module format insmod: can't insert '/lib/modules/crypto_hash.ko': invalid module format insmod: can't insert '/lib/modules/aead.ko': invalid module format insmod: can't insert '/lib/modules/pcompress.ko': invalid module format insmod: can't insert '/lib/modules/cryptomgr.ko': invalid module format insmod: can't insert '/lib/modules/aes_generic.ko': invalid module format insmod: can't insert '/lib/modules/rng.ko': invalid module format insmod: can't insert '/lib/modules/aes-x86_64.ko': invalid module format insmod: can't insert '/lib/modules/sha1_generic.ko': invalid module format insmod: can't insert '/lib/modules/cryptd.ko': invalid module format insmod: can't insert '/lib/modules/aesni-intel.ko': No such device insmod: can't insert '/lib/modules/libcrc32c.ko': invalid module format insmod: can't insert '/lib/modules/zlib_deflate.ko': invalid module format insmod: can't insert '/lib/modules/synobios.ko': File exists Jul 9 20:33:38 syslogd started: BusyBox v1.16.1 Jul 9 20:33:38 kernel: [ 4.333050] ata1.00: Find SSD disks. [sTT_FTM32GX25H] Jul 9 20:33:38 kernel: [ 4.339616] md: sdb2 has different UUID to sdb1 Jul 9 20:33:38 kernel: [ 4.650389] r8168 Copyright (C) 2013 Realtek NIC software team Jul 9 20:33:38 kernel: [ 4.650392] This program comes with ABSOLUTELY NO WARRANTY; for details, please see . Jul 9 20:33:38 kernel: [ 4.650394] This is free software, and you are welcome to redistribute it under certain conditions; see . Jul 9 20:33:38 kernel: [ 4.654469] bromolow_synobios: module license 'Synology Inc.' taints kernel. Jul 9 20:33:38 kernel: [ 4.654638] Disabling lock debugging due to kernel taint Jul 9 20:33:38 kernel: [ 4.657400] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068 Jul 9 20:33:38 kernel: [ 4.657713] IP: [] syno_libata_index_get_by_map+0x36/0x83 Jul 9 20:33:38 kernel: [ 4.657907] PGD 6dfc2067 PUD 6dfc3067 PMD 0 Jul 9 20:33:38 kernel: [ 4.658011] Oops: 0000 [#1] SMP Jul 9 20:33:38 kernel: [ 4.658011] CPU 1 Jul 9 20:33:38 kernel: [ 4.658011] Modules linked in: bromolow_synobios(P+) r8168(O) r8101(O) e1000e(O) Jul 9 20:33:38 kernel: [ 4.658011] Jul 9 20:33:38 kernel: [ 4.658011] Pid: 1261, comm: insmod Tainted: P O 3.2.11 #4 System manufacturer System Product Name/E45M1-M PRO Jul 9 20:33:38 kernel: [ 4.658011] RIP: 0010:[] [] syno_libata_index_get_by_map+0x36/0x83 Jul 9 20:33:38 kernel: [ 4.658011] RSP: 0018:ffff88006b1f3d48 EFLAGS: 00010286 Jul 9 20:33:38 kernel: [ 4.658011] RAX: 0000000000000000 RBX: ffff88006b1f3d58 RCX: 0000000000000000 Jul 9 20:33:38 kernel: [ 4.658011] RDX: ffffffff8171b814 RSI: 0000000000000003 RDI: ffff88006b1f3d58 Jul 9 20:33:38 kernel: [ 4.658011] RBP: ffff88006df94000 R08: ffffffff81921c60 R09: 0000000000000000 Jul 9 20:33:38 kernel: [ 4.658011] R10: ffff88006b3bd400 R11: 0000000000000016 R12: 0000000000000000 Jul 9 20:33:38 kernel: [ 4.658011] R13: ffffffffa00a04c0 R14: ffffc9000005c000 R15: 0000000000000016 Jul 9 20:33:38 kernel: [ 4.658011] FS: 0000000000000000(0000) GS:ffff88006e500000(0000) knlGS:0000000000000000 Jul 9 20:33:38 kernel: [ 4.658011] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b Jul 9 20:33:38 kernel: [ 4.658011] CR2: 0000000000000068 CR3: 000000006dfc5000 CR4: 00000000000006e0 Jul 9 20:33:38 kernel: [ 4.658011] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Jul 9 20:33:38 kernel: [ 4.658011] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Jul 9 20:33:38 kernel: [ 4.658011] Process insmod (pid: 1261, threadinfo ffff88006b1f2000, task ffff88006dd6d8d0) Jul 9 20:33:38 kernel: [ 4.658011] Stack: Jul 9 20:33:38 kernel: [ 4.658011] ffff88006df94000 ffffffff812077f8 0000000000000000 ffffffffa009f720 Jul 9 20:33:38 kernel: [ 4.658011] ffffc90000012000 ffffffff812b8261 010004157f1c0300 ffffffffa009f720 Jul 9 20:33:38 kernel: [ 4.658011] 0000000000000016 ffffffffa009a5f0 0000000000000000 ffffffffa009d9b4 Jul 9 20:33:38 kernel: [ 4.658011] Call Trace: Jul 9 20:33:38 kernel: [ 4.658011] [] ? scsi_host_lookup+0x46/0x4e Jul 9 20:33:38 kernel: [ 4.658011] [] ? syno_libata_disk_map_table_gen+0x43/0x92 Jul 9 20:33:38 kernel: [ 4.658011] [] ? synobios_rtc_init+0x90/0x90 [bromolow_synobios] Jul 9 20:33:38 kernel: [ 4.658011] [] ? synobios_model_init+0x54/0x190 [bromolow_synobios] Jul 9 20:33:38 kernel: [ 4.658011] [] ? synobios_init+0x44/0x2d0 [bromolow_synobios] Jul 9 20:33:38 kernel: [ 4.658011] [] ? do_one_initcall+0x79/0x127 Jul 9 20:33:38 kernel: [ 4.658011] [] ? sys_init_module+0x104a/0x11ef Jul 9 20:33:38 kernel: [ 4.658011] [] ? fput+0x175/0x196 Jul 9 20:33:38 kernel: [ 4.658011] [] ? filp_close+0x64/0x6c Jul 9 20:33:38 kernel: [ 4.658011] [] ? system_call_fastpath+0x16/0x1b Jul 9 20:33:38 kernel: [ 4.658011] Code: 89 d0 48 8d 74 24 10 c7 44 24 0c ff ff ff ff 48 8d 5c 24 10 48 89 f7 be 03 00 00 00 66 ab 88 d0 48 c7 c2 14 b8 71 81 aa 48 89 df <8b> 49 68 01 c9 89 c9 48 81 c1 20 1c 92 81 e8 9c 0c ee ff ff c8 Jul 9 20:33:38 kernel: [ 4.658011] RIP [] syno_libata_index_get_by_map+0x36/0x83 Jul 9 20:33:38 kernel: [ 4.658011] RSP Jul 9 20:33:38 kernel: [ 4.658011] CR2: 0000000000000068 Jul 9 20:33:38 kernel: [ 4.667863] ---[ end trace 030b2babde2bad05 ]--- Jul 9 20:33:38 kernel: [ 5.035737] synoacl module [synoacl_ext4] is not loaded Jul 9 20:33:38 kernel: [ 5.035894] synoacl module [synoacl_vfs] is not loaded Jul 9 20:33:38 kernel: [ 5.050855] EXT3-fs (md0): error: couldn't mount because of unsupported optional features (c0) Jul 9 20:33:38 kernel: [ 6.031940] acpi_cpufreq: Unknown symbol cpufreq_get_measured_perf (err 0) Jul 9 20:33:38 kernel: [ 6.059218] mdio: exports duplicate symbol mdio45_ethtool_gset_npage (owned by kernel) Jul 9 20:33:38 kernel: [ 6.090192] crypto: exports duplicate symbol __crypto_alloc_tfm (owned by kernel) Jul 9 20:33:38 kernel: [ 6.099857] crypto_algapi: exports duplicate symbol __crypto_dequeue_request (owned by kernel) Jul 9 20:33:38 kernel: [ 6.108350] crypto_wq: exports duplicate symbol kcrypto_wq (owned by kernel) Jul 9 20:33:38 kernel: [ 6.119593] crypto_blkcipher: exports duplicate symbol __ablkcipher_walk_complete (owned by kernel) Jul 9 20:33:38 kernel: [ 6.128848] crypto_hash: exports duplicate symbol ahash_attr_alg (owned by kernel) Jul 9 20:33:38 kernel: [ 6.137328] aead: exports duplicate symbol aead_geniv_alloc (owned by kernel) Jul 9 20:33:38 kernel: [ 6.147644] pcompress: exports duplicate symbol crypto_alloc_pcomp (owned by kernel) Jul 9 20:33:38 kernel: [ 6.156518] cryptomgr: exports duplicate symbol alg_test (owned by kernel) Jul 9 20:33:38 kernel: [ 6.174877] aes_generic: exports duplicate symbol crypto_aes_expand_key (owned by kernel) Jul 9 20:33:38 kernel: [ 6.183334] rng: exports duplicate symbol crypto_default_rng (owned by kernel) Jul 9 20:33:38 kernel: [ 6.233225] aes_x86_64: exports duplicate symbol crypto_aes_decrypt_x86 (owned by kernel) Jul 9 20:33:38 kernel: [ 6.248590] sha1_generic: exports duplicate symbol crypto_sha1_update (owned by kernel) Jul 9 20:33:38 kernel: [ 6.278112] cryptd: exports duplicate symbol cryptd_ablkcipher_child (owned by kernel) Jul 9 20:33:38 kernel: [ 6.334233] libcrc32c: exports duplicate symbol crc32c (owned by kernel) Jul 9 20:33:38 kernel: [ 6.345291] zlib_deflate: exports duplicate symbol zlib_deflate (owned by kernel) Jul 9 20:33:38 s00_synocheckfstab: s00_synocheckfstab.c:47 [info] NO volume exists, skip generate fstab Jul 9 20:33:38 s00_synocheckfstab: volume_readahead_allset.c:18 [info] NO volume exists, skip generate fstab Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: scemd.c:127 open /dev/synobios error! Jul 9 20:33:43 scemd: modules/mapping_fan.c:178 Default fan type FAN_UNKNOWN is used. Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/raid_sys_volume_check.c:150 MD0 active disks 1, designed disks 12 Jul 9 20:33:43 scemd: modules/raid_sys_volume_check.c:150 MD1 active disks 1, designed disks 12 Jul 9 20:33:43 scemd: modules/synobios_dispatcher.c:33 fail to open synobios Jul 9 20:33:43 scemd: modules/volume_control.c:302 error: no matched mute function pair found, using default function set Jul 9 20:33:43 scemd: modules/disk_hibernation.c:1802 Force hibernation enable, idle minutes 20 Jul 9 20:33:43 scemd: modules/disk_hibernation.c:1826 Eunit Deep sleep timer 0 Jul 9 20:33:43 scemd: modules/cpu_frequence_adjust.c:176 cpufreq module was not loaded, CPU Frequence Scalling was disabled. Jul 9 20:33:43 scemd: external_microp_id_check.c:44 Fail to open synobios platform error Jul 9 20:33:43 scemd: write to uart2 error, error=(5)Input/output error Jul 9 20:33:43 poweroff: init/halt.c (76) Fail to shmget from LCM module. Error=No such file or directory Jul 9 20:33:44 syno_poweroff_task: syno_poweroff_task.c:83 Fail to Terminate scemd Jul 9 20:33:44 synosshdutils: synosshdutils.c:239 Failed to remove key [sftpd], errno=No such file or directory. [0x0900 file_get_key_value.c:56] Jul 9 20:33:44 synosshdutils: synosshdutils.c:194 Failed to fopen [/tmp/sshd.reference]. err=No such file or directory Jul 9 20:33:44 root: /usr/syno/etc/rc.d/S98findhostd.sh stop findhostd Jul 9 20:33:44 synoprint: printer_enable_ext.c:488 delete printer failed: no bus id Jul 9 20:33:44 synocheckshare: service_disable_set.c(68)Not defined date : id=4 Jul 9 20:33:44 syno_hdd_util: Model:[sTT_FTM32GX25H], Firmware:[1819], S/N:[P573915-ADAX-7179033] in [/dev/sdb] is ssd Jul 9 20:33:44 synocheckshare: synocheckshare.c:1166 Failed to enable PGSQL [0x8300] Jul 9 20:33:44 synousbdisk: RCClean succeeded Jul 9 20:33:44 synosata: synosata.c:152 no external sata devices granted Jul 9 20:33:45 synoexternal: write to uart2 error, error=(5)Input/output error killall: synolunbkp: no process killed Jul 9 20:33:46 ddnsd: main(ddnsd.c:3006): not enable DDNS, shutdown daemon Jul 9 20:33:47 synoexternal: write to uart2 error, error=(5)Input/output error Jul 9 20:33:47 kernel: [ 15.836246] sd 7:0:0:0: [sdu] No Caching mode page present Jul 9 20:33:47 kernel: [ 15.836368] sd 7:0:0:0: [sdu] Assuming drive cache: write through Jul 9 20:33:47 kernel: [ 15.847865] sd 7:0:0:0: [sdu] No Caching mode page present Jul 9 20:33:47 kernel: [ 15.848055] sd 7:0:0:0: [sdu] Assuming drive cache: write through Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/001/001 Jul 9 20:33:47 hotplugd: DEVPATH:usb1 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb1 Jul 9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb1, /proc/bus/usb/001/001, add, , ) Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/001/001, usbid=1d6b:0002:0000:00:12.2 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/001/001 Jul 9 20:33:47 hotplugd: DEVPATH:1-0:1.0 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: INTERFACE:9/0/0 Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:13.2 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/002/001 Jul 9 20:33:47 hotplugd: DEVPATH:usb2 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb2 Jul 9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb2, /proc/bus/usb/002/001, add, , ) Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/002/001, usbid=1d6b:0002:0000:00:13.2 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/002/001 Jul 9 20:33:47 hotplugd: DEVPATH:2-0:1.0 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: INTERFACE:9/0/0 Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:00:16.2 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/003/001 Jul 9 20:33:47 hotplugd: DEVPATH:usb3 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb3 Jul 9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb3, /proc/bus/usb/003/001, add, , ) Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/003/001, usbid=1d6b:0002:0000:00:16.2 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/003/001 Jul 9 20:33:47 hotplugd: DEVPATH:3-0:1.0 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: INTERFACE:9/0/0 Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0001:0000:00:12.0 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/004/001 Jul 9 20:33:47 hotplugd: DEVPATH:usb4 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb4 Jul 9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb4, /proc/bus/usb/004/001, add, , ) Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/004/001, usbid=1d6b:0001:0000:00:12.0 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/004/001 Jul 9 20:33:47 hotplugd: DEVPATH:4-0:1.0 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: INTERFACE:9/0/0 Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:13.0 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/005/001 Jul 9 20:33:47 hotplugd: DEVPATH:usb5 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb5 Jul 9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb5, /proc/bus/usb/005/001, add, , ) Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/005/001, usbid=1d6b:0001:0000:00:13.0 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/005/001 Jul 9 20:33:47 hotplugd: DEVPATH:5-0:1.0 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: INTERFACE:9/0/0 Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:14.5 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/006/001 Jul 9 20:33:47 hotplugd: DEVPATH:usb6 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb6 Jul 9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb6, /proc/bus/usb/006/001, add, , ) Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/006/001, usbid=1d6b:0001:0000:00:14.5 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/006/001 Jul 9 20:33:47 hotplugd: DEVPATH:6-0:1.0 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: INTERFACE:9/0/0 Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:16.0 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/007/001 Jul 9 20:33:47 hotplugd: DEVPATH:usb7 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: hotplugd.c:807 Fail to recognize usb DEVNAME=, DEVPATH=usb7 Jul 9 20:33:47 hotplugd: hotplugd.c:1331 failed to setup usb config, (DEVPATH, DEVICE, ACTION, DEVNAME, INTERFACE)=(usb7, /proc/bus/usb/007/001, add, , ) Jul 9 20:33:47 hotplugd: hotplugd.c:1033 failed get usb status from usb config, DEVICE=/proc/bus/usb/007/001, usbid=1d6b:0001:0000:00:16.0 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/007/001 Jul 9 20:33:47 hotplugd: DEVPATH:7-0:1.0 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: INTERFACE:9/0/0 Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/002/002 Jul 9 20:33:47 hotplugd: DEVPATH:2-4 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: external_disk_port_check.c:280 device path should not be NULL Jul 9 20:33:47 hotplugd: ##### ACTION:add Jul 9 20:33:47 hotplugd: DEVICE:/proc/bus/usb/002/002 Jul 9 20:33:47 hotplugd: DEVPATH:2-4:1.0 Jul 9 20:33:47 hotplugd: SUBSYSTEM:usb Jul 9 20:33:47 hotplugd: INTERFACE:8/6/80 Jul 9 20:33:47 kernel: [ 16.234838] sd 7:0:0:0: [sdu] No Caching mode page present Jul 9 20:33:47 kernel: [ 16.234966] sd 7:0:0:0: [sdu] Assuming drive cache: write through Jul 9 20:33:48 synofstool: volume_fs_cache_dump.c:38 [info] NO volume exists, skip generate fstab Jul 9 20:33:49 hotplugd: ##### ACTION:add Jul 9 20:33:49 hotplugd: DEVNAME:sdu Jul 9 20:33:49 hotplugd: DEVICE:/proc/bus/usb/002/002 Jul 9 20:33:49 hotplugd: DEVGUID:1172FD860 Jul 9 20:33:49 hotplugd: DEVPATH:sdu Jul 9 20:33:49 hotplugd: SUBSYSTEM:block Jul 9 20:33:49 hotplugd: PHYSDEVPATH:/devices/pci0000:00/0000:00:13.2/usb2/2-4/2-4:1.0/host7/target7:0:0/7:0:0:0 Jul 9 20:33:49 hotplugd: hotplugd.c:835 ##### complete device hotplug!! Jul 9 20:33:49 hotplugd: hotplugd.c:506 fail to parse the line. [ ] Jul 9 20:33:49 hotplugd: hotplugd.c (1434) ==== USB disk [sdu] plugged in ==== Jul 9 20:33:49 hotplugd: hotplugd.c:1435 goto USB disk, szDeviceName=sdu Jul 9 20:33:49 avahi-daemon[6841]: Failed to add service 'nas' of type '_http._tcp', ignoring service group (/usr/syno/avahi/services/http.service): Invalid record Jul 9 20:33:49 root: /usr/syno/etc/rc.d/S40irqbalance.sh stopped irqbalance Jul 9 20:33:51 syslogd exiting With Ubuntu Live cd dmesg [ 10.295649] scsi1 : ahci [ 10.296831] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014. [ [ 10.525625] scsi3 : 3ware 9000 Storage Controller [ 10.525760] 3w-9xxx: scsi3: Found a 3ware 9000 Storage Controller at 0xfea20000, IRQ: 16. [ 10.861237] 3w-9xxx: scsi3: Firmware FE9X 4.10.00.026, BIOS BE9X 4.08.00.004, Ports: 8. module info ubuntu@ubuntu:~$ modinfo 3w-9xxx filename: /lib/modules/3.8.0-19-generic/kernel/drivers/scsi/3w-9xxx.ko version: 2.26.02.014 license: GPL description: 3ware 9000 Storage Controller Linux Driver author: LSI srcversion: 1BFC66DD68F5C3315E37B66 alias: pci:v000013C1d00001005sv*sd*bc*sc*i* alias: pci:v000013C1d00001004sv*sd*bc*sc*i* alias: pci:v000013C1d00001003sv*sd*bc*sc*i* alias: pci:v000013C1d00001002sv*sd*bc*sc*i* depends: intree: Y vermagic: 3.8.0-19-generic SMP mod_unload modversions parm: use_msi:Use Message Signaled Interrupts. Default: 0 (int) i hope this are the right one

first, very nice and good work. I have a problem with my 3Ware 9650SE-8LPML. I Install the system without the controller and the system works. When I install the controller (with and without HDD) the system boot's up and when it is finish it's make a Shutdown. When you need the logfiles pleas tell me. Sorry for my bad English.