Jump to content
XPEnology Community

yonif

Rookie
  • Posts

    4
  • Joined

  • Last visited

Everything posted by yonif

  1. J'ai résolu mon problème. Merci à sbv3000. En espérant que cela puisse servir à d'autres.
  2. It solved the problem. Thank you for your help !
  3. Hello I am encountering an issue and I hope that I will find some help here. I have a HP N54L (with modified BIOS) that I use with ESXI 5.5 Until last week, I was using the following configuration: 4 x 6To HDD plugged on the 4 bays of the HP. 1 250go HDD for the OS (Datastore) plugged on the Sata Port 5. Everything was working perfectly. Now, i have just bought 2 new 6To HDD. I would like to have 7 disks working at the same time (6 for storage, 1 for the OS). In order to make this possible, I bought a Syba SI-PEX40061 Sata HDD controller card which is supposed to be compatible with the HP N54L as indicated on several forums. I wanted to have the following configuration: 4 x 6To HDD plugged on the N54L bays the 250go HDD on the Sata Port 5 the 2 last 6To HDD plugged to the new Syba Sata Controller Card. Unfortunately, I am not able to make those 2 new disks work. ESXI is not able to see them. In other words, when I am trying to add those 2 new disks with RDM in ESXI, I cannot see them listed in /dev/disks In addition, on the Hard Disks section of the HP Bios, I can see the 2 new disks but their names contains the prefix IDE instead of HDD. It looks like they are detected as IDE and not AHCI. In short, I cannot make my new HDD work with ESXI (so Xpenology). Does someone have an idea for me ? Is there someone who was able run Xpenology with 6 HDD for storage (excluding the disk used for the OS). If yes, how ? With a Sata Controller Card ? Which one ? Thank you for your help.
  4. Bonjour à tous. Je suis confronté à un problème et j'espère pouvoir trouver de l'aide ici. J'ai un HP n54L (bios moddé) qui tourne aujourd'hui avec ESXI. Jusqu'à la semaine dernière, j'avais la configuration suivante : 4 HDD 6 to (pour le stockage) branchés sur les 4 emplacements du HP. Un disque de 250 go pour la base de données de ESXI branché sur le port SATA 5. Tout a toujours très bien fonctionné. Je viens d'acheter deux HDD supplémentaires pour le stockage. Je souhaite donc brancher 7 disques sur le HP. 6 pour le stockage, un pour ESXI. Pensant bien faire, j'ai acheté la carte Controlleur SATA Syba Contrôleur SATA III PCI-e x1 avec équerre Low Profile Marvell indiquée comme compatible en première page du forum hardware.fr ici. afin de brancher 4 disques 6To sur les emplacements disponibles, l'OS sur le port 5 et relier les deux nouveaux disques 6To sur la carte controlleur fraichement installée sur le port PCIe x1. Malheureusement, ESXI n'arrive pas à reconnaître les disques. Autrement dit, lorsque j'essaye d'ajouter les disques en mode RDM dans ESXI, les disques ne sont pas visibles dans /dev/disks Aussi, dans le bios HP, dans la partie "Hard disks", les disques sont visibles mais le nom des disques est précédé par le préfixe IDE au lieu de HDD. Les disques semblent donc détectés en IDE en non AHCI. Bref impossible à faire reconnaitre par ESXI (et donc Xpenology derrière). Quelqu'un a t'il une idée ? Qui a réussi à faire reconnaître 6 disques de stockage avec Xpenology, si oui, comment ? avec une carte SATA ? si oui, laquelle ? Merci d'avance pour votre aide.
×
×
  • Create New...