fz500

Transition Members
  • Content Count

    5
  • Joined

  • Last visited

Community Reputation

0 Neutral

About fz500

  • Rank
    Newbie
  1. 試了另一個方式,在使用vlance登入後開啟telnet or ssh服務 telnet nas ip 執行 modprobe e1000 啟用e1000的網卡驅動 關機改回e1000後在開機即可使用e1000正常運行, 不知有人試過嗎?
  2. fz500

    DSM 6.2 Loader

    Successfully on VMware Workstation run Loader-1.04b DS918+ In the environment of the default network card e1000, after booting, there is no search for the nas device, and the vm network card is set to ethernet0.virtualDev = "e1000" to ethernet0.virtualDev = "vlance". Finally, you can search for nas straight and online install DSM 6.2.1 is normal But the network will only have a speed of 10/100. If you want to test it, you can try it. If you try to add an e1000 card, it will not work, so it should be caused by loader-1.04b and preset e1000
  3. VMware Workstation 跑 Loader-1.04b DS918P 終於成功了 原本測試在預設網卡e1000的環境下,一直無法捉的到nas,後來將網卡設置ethernet0.virtualDev ="e1000"改為 ethernet0.virtualDev = "vlance" 終於捉到nas並且可以直接線上安裝DSM6.2.1 但網路的部份會只剩下10/100的速度,想用來模擬測試的可以試試,有試過在加上一張e1000的網卡會在失效,所以應該是loader-1.04b和e1000不合所造成
  4. VMware Workstation 14.1.2 TEST DSM 6.2 work OK But it doesn’t feel very stable. The WebUI often connects with Error. After a while, they can connect again.
  5. fz500

    Working DSM 6

    Good ~ DSM6 NFS VAAI Test status Support