abesus

I already have locally updated sources for 918+ v 7.0.1 with support for extensions. The problem is, that TTG's extensions also needs to be updated to support 7.0.1 or someone has to fork them and modify... edit: so I've decided to wait for official support for 7.0.1. Until that I will stay on my current 7.0.1. Good for me that it is stable

So it looks like this problem is connected to DS3615xs. I'm running DS918+. One week ago I was running DS3615xs on the same baremetal (xeon E3-1265L V4, MB MSI Z97I ACK GAMING) machine with same dockers (this time I had InfluxDB docker runnig) and everything was working stable.

I've created InfluxDB container but at this moment I have no connection to db. I'll let you now if anything happens. Im using few containers and everything is working great (gitlab, roon-server, mincraft server) btw: I've found this info, which looks very similar to your problems: https://access.redhat.com/solutions/1354963

The good information is that according to internet Xeon E3-1265L V4 has support for MOVBE. My problem was connected to intel iommu driver and I've resolved this issue by reconfiguring this driver. From now my DSM is stable and user_config.json looks like this (vid/pid/sn/mac are different of course ) It will (should) have impact only for virtual machines inside DSM which I don't have

I've build new image and installation was stopping at 56%. After cleaning everything once again, removing all images from docker and building image one more time it is working correctly.

In user_config.json add "intel_iommu" : "igfx_off" in section extra_cmdline and compile loader again.

In my case there were lot of logs like this: It looks like there is an error in kernel (it is not the latest one) in iommu. After disabling this driver my NAS is rocket solid (excluding strange logs from bootup ;-))

Hi, I've question: Is such log normal or is something bad in my system:

I've resolved this issue by adding extra parameter to linux kernel (to grub command line): intel_iommu=igfx_off. In my case it was caused by some error in kernel.

My my fault. I was trying to set conservative same as @WiteWulf but my system is not supporting such parameter - powersave works ok. Thanks for all

Hello again. I've got question: how can I add additional param to kernel. I want to pass intel_iommu=off. Is user_config.json a good place for that? edit: unfortunatelly my DS918+ hangs up after adding photos to Photo app and after starting face recognition (I guess).

Yes. I'm sure:

It doesn't work on my setup. Currently DS918+(cpu xeon, motherboard MSI Z97I GAMING ACK). I've got such error: -ash: echo: write error: Invalid argument I cannot write to this file even using vi. Am i doing something wrong?

I'm not sure about that. Currently I'm working on DSM 6.2.4 from ds3615xs and face recognition is working very well. Video transcoding is not working because I couldn't find valid SN and MAC for ds3615xs.

What kind of problem is fixed by this parameters? edit: I've got it

So in my case, software for DS918+ should work on my CPU. That would be great (I've working set of SN and MAC) Did you check /var/log/messages? I've got a lot logs like: kernel: DMAR: DRHD: handling fault status reg 3 kernel: DMAR: [DMA Read] Request device [some numbers] fault addr some address... I can't remember exactly but if it can be helpful I can build loader again and check.

Hi everyone, Ive successfully built and use loader for 980+. Unfortunatelly, I'm using Xeon E3-1265L V4 and there were many errors in system logs. System was hanging-up every few hours. It looks like DS918+ is using some new CPU/GPU instructions that are missing in my old xeon. After that I've tried DS3615xs loader. DSM 7.0 is in beta stage so I've tried 6.2.4. Everything is working great except moments. How can I find valid SN/MAC combination for ds3615xs? Seba

I used xpenoboot usb stick with my PC. I have changed syslinux.cfg by adding parameters (see my second post). It works for me. Just remember to add those parameters in every submenu (xpenology, debug and install).

If anyone will have same problem/hardware may use params below. Works for me: rmmod=r8169,r8169_new insmod=r8168

Hi Everyone, I've question about NIC. I am using XPEnology on my ITX PC but with gnoBoot. I cannot use XPEnoboot because of network adapter. My PC is based on ECS KBN-I/2100 (V1.1) motherboard. After booting from XPEnoboot my NAS is not available in home network. It looks like XPEnoboot has no drivers for my network adapter (RTL8111E Gigabit Fast Ethernet Controller). Is there any chance that i can put some extra boot parameters to XPEnoboot to force loading module for my NIC? Thanks in advance for replies. Regards, Seba

thx , it works (hp n36l+dlink usb3 card+eaton 5110 ups) Could you give the full name of working usb3 controller (full model name). Thanks in advance