Burner1977

Hello Neotronic, I am quite curious how you did this? Can you be so kind to give a detailed description on what steps you took (short tutorial). - What tool did you use to concert the IMG to VHD. - Did you make de disk dynamic or fixed. - Steps how you did setup the new virtual machine - If any changes made on the virtual please describe. Cheers Burner1977

I am also want to know how he did this.

Hello Polanskiman, I read your tutorial on installing. I'm been trying to get the loader 1.02a running on my asrock q1900-itx motherboard. In your tutorial you mention that if the xpenology is not found properly the NIC drivers aren't included in the ram. Could you be so kind to have a look if the drivers for a Realtek RTL8111GR are in there. If not can they be included. Thank you very much in advance Cheers Burner1977

Hello, I just did a test run on a Asrock Q1900-itx MB but with no result. I prepared the usb stick with the correct VID, PID and MAC address (Loader 1.02a2 ds3617xs). It starts and loads the kernel but my rig isn’t found on my network. I tried with find.synology.com and Synology assistant. Is it possible that the drivers for my NIC (Realtek RTL8111GR) aren’t present in the 1.02a2? Cheers Burner1977

Hello everybody, can't wait untill the stable version is out. But as I always say "be patient and the good will come to you". I was just wondering if there will also be support to run this on a Hyper-V server. I just switched to Hyper-V from ESXi so that why I ask. I the mean time keep up the good work. Cheers Burner1977

Hello everyone, Respect for all the Dev's how are doing their best so make en keep this project alive and kicking. I allready did a upgrade for my baremetal machine without any problems. Now I want to install it on my ESXI server that is running 6.0.0 U2 and the .ova fails to deploy the vertial machine. I took the 1.0.1 version. I upload the .ova file and the vmdk. Is this correct or am I doing something wrong? I can't find a tutorial for DSM 6. So if someone know's a good tutorial than please share. Thanks in advance Burner1977

Hello everyone, I have been waiting a long time for DSM6. I check from time to time on this forum to see if there is any progress. To my surprise I saw that there is a working version. I would like to ask a few questions: 1. Is this a stable version to use on bare metal (running DSM 5.2 on a Asrock Q2900-itx)? 2. Is it possible to migrate from my current version 5.2-5644 Update 3? 3. Has somebody already made a complete tutorial (is not and the questions above are both yes then I wouldn’t mind to make one for everybody)? Thank you in advance for the answers and keep up the good work. Cheers Burner1977

Hello Every body, I was looking around on this site and I clicked on a linked that directed me to myxpenology.com. It was refering back to this site and that there was a possibility that it had migrated my account from this site and that I should try to login. Is this correct? Thanks fort he answer Cheers Burner1977

Hello Everyone, Quick question that hopefully can be answered by somebody. Today I added a SSD to my rig to play around with the SSD cache option. The disk is seen by DSM and when I add it as a disk to be used for caching all hell breaks loose. My rig keeps on rebooting. It starts nicely into XPenology but the restarts itself and keeps doing this. As soon as i disconnect the SSD and boot again DSM can be reached again. This anyone had a similar problem and if so what was the fix. I am runnung a asrock q2900-itx DSM 5.2-5644 Update 1 XPEnology 5.2-5644 Thx in advance Burner1977

Hello, I did a clean install on my bare metal asrock Q1900 but this was a NoNo. I had the problems with not being able to create a new volume. If I look at the boot of XPenology it states that for a few items there is no patch found. I installed the previous version and I am going to try the update from here. Because this is the way I upgraded My virtual HyperV version and that worked. I will keep you posted what the end result of this test is. Cheers Burner1977

I can confirm it works on HyperV. I will do the same on my bare metal asrock Q1900 this afternoon en let you know. Cheers Burner1977

Hello agent47SG1, Do you know if there is a possibillity to get this working. I am asking this because my previous disk crashed and if I can plan a S.M.A.R.T. check I can recieve a email notice that the disk is starting to fail or has errors. Cheers Burner1977

Hello everybody, I have the following question. I am running te latest version of XPenology with the last 5.1 DSM version in Hyper-V. I did a clean install recently and what I noticed is that if you look at the storage manager in DSM it can't retrieve the serial en firmware version. It keeps showing that it is loading. This results in S.M.A.R.T. not being availible. Is this normal or can it be fixed? Thanks for the reply. Cheers Burner1977

upgraded to this version on my ASRock Q2900-ITX with no issues. cheers Burner1977

But now off course the million dollar question. What about the files. Are they posted here on the site? Cheers Burner1977

Hello everybody, I have a question if it is possible to install the Hyper-V Integration Services and if so is there a tutorial about thsi. Thanks for the effort Cheers Burner1977

Hello everybody, When I logged in today I saw that there was a new update available. The release date of the update was 04-24-2014. Can this update be installed the same way like update 2: - Download the new update with DSM GUI - Run the commands: sed ‘s/flashupdateDeb/flashupdateDeb1/’ /autoupd@te.info > /autoupd@te.info1 mv /autoupd@te.info1 /autoupd@te.info Thx for the info Cheers Burner1977

Hello Username9876, I did that and imported the settings back in de dsm 5, but got an error doing so. Maybe it was only on my machine so I can't say. If you give the right's back as discribed above everything would be ok. The rest of the settings were OK. Cheers Burner1977

I tried this but I got a error when importing the settings back. Maybe it is only on my machine Cheers Burner1977

I've read number of times that the admin rights disappear when doing the upgrade - but from where do you reassign the admin rights? The command line or from the GUI somewhere. Please enlighten me. Hello Zarocq, I did it in the GUI under Control panel/shared folder. Then click on a shared folder and say edit and you can set the permissions for the admin user. cheers Burner1977

Hello Dfds, thanks for your reply. The sollution didn't work. This is my current my.cnf. Would you be so kind to have a look if something else is off? Maybe another thing. I looked for mysqld.sock in the pad stated in socket = but it is not there [client] port = 3306 socket = /run/mysqld/mysqld.sock [mysqld] #bind-address = 0.0.0.0 port = 3306 socket = /run/mysqld/mysqld.sock skip-external-locking key_buffer_size = 16K max_allowed_packet = 1M table_open_cache = 4 sort_buffer_size = 64K read_buffer_size = 256K read_rnd_buffer_size = 256K net_buffer_length = 2K thread_stack = 240K innodb_data_home_dir = /var/services/mysql innodb_data_file_path = ibdata1:10M:autoextend innodb_log_group_home_dir = /var/services/mysql innodb_buffer_pool_size = 16M innodb_additional_mem_pool_size = 2M #innodb_log_file_size = 5M #innodb_log_buffer_size = 8M #innodb_flush_log_at_trx_commit = 1 #innodb_lock_wait_timeout = 50 [mysqldump] quick max_allowed_packet = 16M [mysql] no-auto-rehash [myisamchk] key_buffer_size = 8M sort_buffer_size = 8M [mysqlhotcopy] interactive-timeout # Please add your custom configuration to here: !include /usr/syno/etc/packages/MariaDB/my.cnf thank you for your time and help cheers Burner1977

Hello Dfds, did that but it didn't help. Any other ideas? thx Burner1977

Hello Jokies, Thanks for the advice. I did the upgrade without really big issues. I am only running into one problem at the moment: As I discovered that mysql isn't used anymore but is replaced with mariadb I installed the mariadb package. When I want to start it it gives me the following error: failed to start mariadb with custom my.cnf It would be much appreciated if someone has a solution for me. I have googled for the issue but I didn’t found a answer that solves the problem For other users how are thinking about upgrading here is the little things I ran into: When doing the upgrade I chose the first option to preserve all my data and most of the settings. When the upgrade was done and I was logged in I had the scare of my life. All my shared folders were gone. Thank god I made a backup. When I logged in with WINSCP I saw that all my folders were still there. What the problem was is that you have to reassign the right’s for admin for all your folders in DSM. After doing this everything was ok. Cheers Burner1977

Hello everyone, I have been reading up on the latest developments ( keep up the good work ) and I was wondering if it is possible to do an upgrade from the 4.3 from Trantor using synoboot to the 5.0 from gnoboot using gnoboot or do I have to wait until Trantor releases his 5.0 version? I didn’t really found a straight answer to this question. I already did a test clean install of DSM 5.0 with gnoboot on an intel 2700MUD motherboard and that runs fine as far as I can see. If the upgrade/switch from 4.3/5.0 synoboot/gnoboot is possible how will bootstrap react to this upgrade. Will it still be available? Thank you for your answer. Cheers Burner1977

Hello Schnapps and jokies, Thank you both for your advise. @Schnaps. I am only running a small rig for home use and the casing only has room for 2 2,5" disks. But thanks anyway @jokies. If there is no real speed improvements I will leave it as it is. Cheers and thx again. Burner1977