Leaderboard

Так выедите моск МТС, чтобы они дали пароли и явки или настроили проброс порта. Но иметь у себя дома неуправляемое устройство в виде роутера как-то не камильфо, но это ваш выбор.

Hallo! Heute noch mal eine Installation versucht mit dem "redpill-loader" und was soll ich sagen läuft super! 😎 Das Problem lag an der Einstellung in der "user_config.json" und an dem Anschluß der SSD. Habe zuerst eine 2TB SSD angeschlossen am SataPort 4 und da wurde keine Festpaltte gefunden. Rumprobieren mit der "user_config.json" half auch nicht weiter. Jetzige Konfiguration SSD an SataPort 0 und untere "user_config.json" brachte dann den Erfolg. ================================================ { "extra_cmdline": { "pid": "0x6387", "vid": "0x058f", "sn": " xxxxxxx", "mac1": "xxxxxxx", "mac2": "xxxxxxx", "netif_num": 2, "DiskIdxMap": "0C", "SataPortMap": "1", "SasIdxMap": "0" }, "synoinfo": {}, "ramdisk_copy": {}, "extensions": [] } ================================================= Übrigens was ich fast vergessen habe keine VM Installation! Big THX an die Entwickler auch wenn das immer so selbstverständlich von den meisten hingenommen wird. 😍🥰🤩 cu-ya

Your best bet would be to ask pocopico nicelly if he can compile drivers for the missing devices and to his rp-ext tree. In Linux drivers are bound to the Linux kernel so you need to recompile using kernel sources used in the specific DSM version and emulated Synology hardware. Skickat från min LE2113 via Tapatalk

Без особых. На всякий случай по одному диску из массива подкидывал

Разброс параметров только по CPU для НАС не очень значителен, все они вполне достаточны для обычных задач. Тут только Вы сами можете решить, что важнее - избыток мощности или бюджет. Также важнее могут оказаться такие параметры материнской платы, как количество sata и тип сетевого контроллера. Тем более, никто не сможет Вам посоветовать, как следует относиться к недостоверному продавцу. Форум больше предназначен для решения технических вопросов.

I read about GitHub has changed their Path structure. Doesn’t it work with adding the extension with new url to the jsons?

Github changed their naming conventions. They removed "master" as a term so any url containing the word master isn't found. Replace "master" with "main" in all the scripts. Otherwise you need to wait for the maintainers to do it.

You could have setup the vm with way less effort... If you use the command sequence from this post, the tinycore image would be pulled, a vm using the tinycore image as usb boot would be created + a 100gb disk + serial ports for boot logs. This vm can be booted right away without changes - or further customized, like adding more disk for instance. Just make sure to not mess arround with any other parameter that you have seen in any random tutorial... they might break the perfectly fine pre-configuration. Once tinycore is booted, you run the usual commands to detect the sata settings and take care of the serial number + network. Before you run the actual build you just need to configure the SataPortMap + DiskIdxMap in the user_config.json according the settings from this post and your setup is complete - of course having additional controllers added as passthrough will require different SataPortMap and DiskIdxMap, but for a default vm "this is the way!" If at one point you mess up the tinycore image and want to start from scratch, you just have to power off the vm, re-execute this command sequenc id=930 gzip --decompress /var/lib/vz/images/${id}/tinycore-redpill.img.gz --keep Start the vm again and you will start with a clean slate, without having to worry about anything else. There is no need to remove the vm, unless you want to get rid of the data on the attached 100gb data disk as well... It doesn't get less painfree than that

This extension enables the power button to shutdown the system, it's on @pocopico repo. @Unregistrado got it right. I didn't remap all the drives to make the sequence perfect, but i should and i will when i have the time. My motherboard has 4 physical satas, but 6 logical ports, so i fill the gaps. The offboard sata controller has 20 ports, but the sequence is messed up too. To install i used SataPortMap=1 to avoid "we've detected errors on hard drives (X, X)", after the successful install did dmesg and looked for ata DUMMY entries, tried the sata_remap editing grub, tests were OK, recompiled RedPill and it's working.

./rploader.sh ext bromolow-7.0.1-42218 add *url* for 3615xs replace „bromolow-…“ With matching device Type and Version so you’re fine. Add *url* of your choice of Repo at Github, mostly recommended Pocopico‘s ones.

you can have up to 24 if you manually tweak the synoinfo.conf and thats for all three types, so even 3615/17 can do more the the 12 defaut (as jun made the loader he did not touch the drive count in 3615/17 as it seemed high enough at this time for most cases and as 916+/918+ came out with its 4 drive default it was naturally needed to tweak that) also to mention is that 918+ has still a 2 nic limit from its default configuration thats need to be tweaked manually if there are more then 2 nic ports 3617 is the choice when it comes to more then 8 cores (its often pretty ok to just disable HT in bios as "HT core" just give 25% performance of a real core) OR it you are using lsi sas controller you can change dsm type just be exchanging the loader and dsm will offer a migration to the new system (its a official process you can read about on synology's website) there are other options for >1Gbit, either have more then one 1G nic and manually active smb multicahnnel in smb.conf (synology might offer this in the gui in dsm 7.1) or have a 802.3bz/NBASE-T usb bases adapter (pcie like asus XG-C100C or even based usb realtek 8152/8156 have drivers working for all three) intel 2.5G is no option at all, intel doues not deliver driver source outside from kernel 5.x also i had a idea, @pocopico offers precompiled modules not just for dsm 7 but also 6.2 and his r8125.ko is newer then mine so i could just add his module and you test if its working, i was thinking about using his modules to make a new driver extension for 7.0 but why not also using it for 6.2.3's driver extension too, his 8152 driver i 9.006 and thats from 2021 source, very like any 8125 nic around will work with that driver https://github.com/pocopico/3.10.105-modules (and i should ask him about anything special ob building that module like modding the source)

hello, the api url change try this (it's working for me) https://your-ip:5001/webapi/auth.cgi?api=SYNO.API.Auth&version=3&method=login&account=admin&passwd=your_admin_password&format= cookie the other url (for activation) not change https://URL:PORT/webapi/entry.cgi?api=SYNO.ActiveBackup.Activation&method=set&version=1&activated=true&serial_number="SERIALNUMBER" regards