Thanks a lot, @IG-88
I think its worth mentioning that bus driver i2c-piix4.ko (if it was build by my request) - is patched version for HP. I'm not sure it will perfectly work on other systems.
Other than that - modules that are relevant to my HP N54L got loaded properly and work normal (jc42,k10temp,w83795)!
I will need to double check ranges and sensors settings though.
Next step - will be thinking of best way to load this on boot. I'm still quite new to DSM 6, will be updating myself on its init procedure.
Console output
w83795adg-i2c-1-2f
Adapter: SMBus PIIX4 adapter port 2 at 0b00
Vcore: +1.19 V (min = +0.00 V, max = +2.05 V)
Vdimm: +1.51 V (min = +0.00 V, max = +2.05 V)
in12: +3.29 V (min = +0.00 V, max = +6.14 V)
in13: +3.23 V (min = +0.00 V, max = +6.14 V)
System Fan: 1052 RPM (min = 329 RPM)
CPU Temp: +70.2 C (high = +109.0 C, hyst = +109.0 C)
(crit = +109.0 C, hyst = +109.0 C) sensor = thermal diode
NB Temp: +49.0 C (high = +105.0 C, hyst = +105.0 C)
(crit = +105.0 C, hyst = +105.0 C) sensor = thermal diode
MB Temp: +34.8 C (high = +39.0 C, hyst = +39.0 C)
(crit = +44.0 C, hyst = +44.0 C) sensor = thermistor
k10temp-pci-00c3
Adapter: PCI adapter
CPU Temp: +75.5 C (high = +70.0 C)
(crit = +100.0 C, hyst = +95.0 C)
jc42-i2c-0-18
Adapter: SMBus PIIX4 adapter port 0 at 0b00
RAM1 Temp: +44.8 C (low = +0.0 C) ALARM (HIGH, CRIT)
(high = +0.0 C, hyst = +0.0 C)
(crit = +0.0 C, hyst = +0.0 C)
Hide