Leaderboard

Hi All If you read my thread about the boot loader updating itself you will understand. I've assembled a revised 'boot loader' that has been updated to 15152 (6.1.3) and should be able to be used to 'reflash' a damaged USB without the risk of version errors and also a clean build. This is based on Jun's 1.02b (DS3615 only) with the v3.2 extra.lzma file from @IG-88 and apart from my vid/pid changes is otherwise unchanged. Process Used:- Created a new image incorporating v3.2 extra.lzma and my vid/pid with OFSMount Flashed a new USB with that image Booted system, found as 6.1-15047 Install DSM 6.1-15047 to HDD Manual update to 6.1.3-15152 Shutdown/remove HDD/reboot to check - came up as 6.1.3-15152 'uninstalled' Created boot .img file from the updated USB disk Flashed a different USB with this image (changed vid/pid) and booted - came up as 6.1.3-15152- uninstalled. Putty Serial output all looked ok with no serious errors I've put a copy of this in a dropbox folder for others to check/test, its a zip file to extract. Note that I had to choose UEFI boot partition 1 for the USB to boot . https://www.dropbox.com/sh/1l0ibcm90ophsz6/AAAIgnajXZx0f98FVDNFrZLea?dl=0 Note that this is purely an exercise to help and is not meant to replace the forum ratified loaders and any use is at your own risk, so please test before use and backup any critical data.

Да полный тухляк этот сторонний ресурс. Все кинулись на халяву которой нет. В итоге тут тема погибает. Мотивировать ни кто не хочет.

the drivers for Chelsio would be cxgb, cxgb3 or cxgb4 atm they are not in the 3.2 package for 3615 (no one asked for them, nerver heard the name and thouht they are exotic and left them to add later) yesterday i started compiling drivers for 3615 (as base for doing the same for 3617 and 916+) as they are in the kernel i can easyly add them to the lsit of drivers to compile, they seem to need firmware, have to look for the files then i can do 916+ next (before 3617) so maybe in a few hours i will have the extra.lzma with your drivers for 916+ (3615 was finished and i already started adding them as i want all 3 packages to be the same) i will send you a pm with the link, would be nice if someone tested it with real hardware, i only do vm testing for 3617/916+) the "official" release will be with a new driver list and for all 3 supported loaders in the next days

видимо имелось ввиду делигирование домена и редактор днс, который у nic стоит 600 в год

1 - Turn off machine and remove usb with v1.02a loader. Keep that usb aside in case you need it later. 2 - Burn new loader v1.02b on usb. Make sure to edit the grub.cfg file like you did for v1.02a (vid/pid, SN, MAC etc). When done, plug the usb key on the machine 3 - Turn on the machine 4 - Use find.synology.com or Synology Assistant to find the machine on the network 5 - Migrate the machine by following the steps indicated on screen. You will be asked to provide the PAT file for 6.1.x so download it first. Download links can he found here: 6 - Let it update. After a while you should be under DSM 6.1.x. You can then apply through the GUI critical updates up to the one that is working. See the critical update section to know which is the latest working one.