Jump to content
XPEnology Community

Leaderboard

Popular Content

Showing content with the highest reputation since 02/28/2024 in all areas

  1. Guys, me again! Solution: I took an older stick (proofed by an older DSM 6.2 station) and made this on a separate Windows-PC (only booting in UEFI-Mode): https://github.com/PeterSuh-Q3/tinycore-redpill/blob/main/README.md I choose always the old system parameters! Means: DSM-Version, MAC, SN etc. But I did not changed/modified the VID and PID from the new USB-Stick. After preparation of the new loader, i put the stick in the NAS. The System/Stick installed itself and after few seconds: it works! I logged on the NAS with the known Syno-surface. I checked all my folders and links from other devices to the NAS! GREAT! Holy $hit! Thanks a lot to @Peter Suh !!!
    3 points
  2. Попробуйте в этом архиве: https://web.archive.org/web/20210416142957/https://archive.synology.com/download/Os/DSM Скачивание не всегда с первого раза, так что пробуйте пока не скачаете
    2 points
  3. Pour rappel le mp4 n'est qu'un conteneur ou une enveloppe (tout comme les fichiers mkv) qui contient une piste audio et une piste vidéo. Ici le pb n'est pas tant le format du fichier mais le codec avec lequel a été encodé la vidéo. Je pari que ton pb concerne les fichiers dont le codec est H265 avec un certain bitrate. De nombreux navigateurs ne supportent pas le h265 nativement (pb de licence...). Donc si le player du navigateur ne sait pas lire ce codec et que le serveur n'est pas en capacité de le transcoder alors tu auras ce type d'erreur 😕
    2 points
  4. Можете вручную добавить в Планировщик задач, пользователь - root
    2 points
  5. Из того, что я понял, DSM все почти одинаковы кроме DVA моделей для виделнаблюдения. 918 и 920 поддерживают апаратный транскодинг на проце intel 7-10 поколений с igpu intel uhd 620 и 630. Для проца amd лучше брать 1621+, только програмный транскодинг. Функционал на 95% идентичен везде. Важно правильно выбрать свой загрузчик, и обычно встроеные сетевые карты от realtek нормально не работают/отваливаются. Но если карта с чипом realtek отдельная в pciex x1, то все ок. Или карта от intel, ето вообще лучший вариант.
    2 points
  6. And, there is one more great thing I gained from this two-week study. 56 ~ 57% connected to disk damage error 3 FAT boot partitions on USB /dev/synoboot1, /dev/synoboot2, /dev/synoboot3 If it cannot be mounted boot-wait (tcrp) and automount (rr) complement this. There are addons such as: If these three boot partitions are not mounted properly, they cannot be created. There is a function that forces this. This is a method I researched and came up with. Force create the above three nodes with the /bin/mknod command. Because this forcefully created node is not a stable node, The 56-57% disk damage error still did not go away. However, as a result of this function, there is no need to forcibly fake these nodes. It seems to be more stable to connect to a USB device directly using "ln -s" in the form of a direct symbolic link. I will discuss this improvement plan with wjz304 and spread it to rr to improve it into a more stable addon.
    2 points
  7. I think I found something useful. Internally, Proxmox points to /dev/loop0 as the USB source. I think I can create synoboot even on bare metal just by creating /dev/loop0 as a dummy img. https://github.com/PeterSuh-Q3/redpill-lkm/blob/master/tools/inject_rp_ko.sh # Injects RedPill LKM file into a ramdisk inside of an existing image (so you can test new LKM without constant full image # rebuild & transfer) # # Internally we use it something like this with Proxmox pointing to /dev/loop0 as the USB source: # rm redpill.ko ; wget https://buildsrv/redpill.ko ; \ # IRP_LEAVE_ATTACHED=1 ./inject_rp_ko.sh rp-3615-v6.img redpill.ko ; losetup ; \ # qm stop 101 ; sleep 1 ; qm start 101 ; qm terminal 101 -iface serial1
    2 points
  8. Bonjour Merci à angel038 Pour ceux qui chercherait voici le processus en détail : 1°/ Se connecter au shadow drive et cliquer l’icône de synchronisation en haut à gauche de l’icône de téléchargement. - Cliquer le bouton "Créer un jeton", lui donner un nom par exemple NAS et noter soigneusement le nom d'utilisateur et pass obtenu (On ne peu plus les avoir ensuite) 2°/ Se connecter au NAS - Cliquer "Centre de paquets" et dans le champ de recherche taper "Cloud Sync" - Cliquer le bouton "Installer" de Cloud Sync. A l'ouverture il demande de choisir un fournisseur de cloud, prendre webDAV - Ensuite il demande : Adresse du serveur, taper : https://drive.shadow.tech/remote.php/webdav puis compte d'utilisateur et mot de passe à remplir avec ceux obtenus ci-dessus - Choisir ensuite les dossiers locaux et distants, le sens de MAJ et la planification. Et ça marche ! GZ
    2 points
  9. Это работает аддон по уменьшению частоты процессора в простое.
    2 points
  10. https://www.amazon.fr/Synology-DVA3221-Desktop-NVR-4bay-KI/dp/B08L3QC9VL You're welcome.
    2 points
  11. Нет её. Точнее, я её не вижу. Во времена Пятой и Шестой версии, валидную пару можно было купить (сомнительное приобретение), украсть (подсмотреть на реальном Сино), с генерировать (Был генератор и формула расчёта) . Но это всё в прошлом Я в своих, что то украл, что то нашёл в инете, одну с генерировал. Сейчас пару предлагает загрузчик и это хорошо и просто. Это работает Я не покупал, но на Авито вроде продавали, но кто даст гарантию реальности ? Были обсуждения покупок, но всё это времена Шестой версии. Я имею ввиду, запустить транскодинг одним из двух вариантов, описанных выше dj_nsk_ом
    2 points
  12. Достаточно просто в веб-интерфейсе DSM нажать "Выключение" (как вариант - коротко нажать кнопку Power на корпусе). Но надо обязательно дождаться полного выключения сервера! Это может длиться достаточно долго - несколько минут, DSM уже будет недоступна, но всё ещё будет "шуршать" дисками и завершать все текущие процессы, надо дождаться именно полного отключения. Возможно, в этом и была ошибка @letarch - отключил питание, не дождавшись корректной остановки DSM, симптомы очень на это похожи: "Отключение было стандартным, через веб-интерфейс syno ... система загрузилась сразу, нормально (хотя прилетел алерт о некорректном отключении системы). Но безвозвратно потерялись данные за последние два месяца" Ещё смущает вот это: " сбойный диск благополучно отключился, а в логи сыпались ошибки ввода вывода" - т.е. ошибки сыпались уже по одному оставшемуся в работе диску? Тогда выключать надо было сразу и заниматься ремонтом, а не продолжать использовать. Да никаких особых действий не требуется. Для замены одного из дисков RAID с избыточностью данных (RAID 1, 5, 6, SHR...) достаточно просто корректно остановить DSM, заменить диск, включить и добавить новый диск в RAID через Диспетчер хранения. Ну, если сбойный диск ещё виден в Диспетчере хранения, то предварительно можно его "Деактивировать" (хотя это и не обязательно). У меня после выхода из строя одного из двух дисков DSM совершенно нормально проработал около месяца, после чего именно таким простым способом неисправный диск был заменён на новый (даже не мной, а сыном "по инструкции"). Всё это время я понимал, что выход из строя или даже какие-то мелкие нарушения в работе единственного рабочего диска могут привести к потере данных - забэкапил важную информацию и более тщательно следил за работой DSM.
    2 points
  13. Купить реальную синьку и плекс пасс и не выносить тута мозг?! )))
    2 points
  14. Ёшкин кот! ну зачем же в нескольких ветках одновременно спрашивать одно и то же? 🤪 Ну и в очередной раз повторю свой призыв: на большинство подобных вопросов уже есть ответы на форуме. Только лень или ... что-то ещё... мешают их найти.... Нет такого понятия "запустить HW транскодирование на Intel J5005", есть две отдельных темы: техническая возможность аппаратного транскодинга: подключился ли драйвер iGPU. Если папка /dev/dri уже есть, значит аппаратный транскодинг доступен. Но сам по себе он не работает, его невозможно "запустить", он либо будет использоваться в конкретных приложениях/пакетах, либо нет - это уже от приложений и их настроек зависит. Наличие кодеков для просмотра и транскодирования (не обязательно - аппаратного с помощью iGPU, при наличии всех кодеков возможно и программное транскодирование, за счёт ресурсов CPU) - для пакетов от Synology (VideoStation, Photos...) нужны AME и FFMPEG 4, для Jellyfin - FFMPEG 4 (можно и 6й подсунуть) и т.д. Если кодеков достаточно, то показывать должно даже при выключенном аппаратном транскодировании (но может это делать с задержкой). Вообще же, ответы все давно даны (если не хочется разбираться в деталях): поставить Arc with Arc Patch, активировать AME, установить FFMPEG 4 - этого набора должно хватить на все варианты...
    2 points
  15. Не нужен .. если есть $ лучше купить плекст расс и забыть про проблемы с VS и т.д гуано..
    2 points
  16. написать в Synology и предложить сделать новую функцию. Сейчас такого нет
    1 point
  17. Хрень вообще интересна и дружелюбна к пользователю. Поломать её сложно )))
    1 point
  18. Не торопитесь с памятью. Я бы поглядел для начала настройки питания в биос. Возможно дядя Ляо по умолчанию поставил галочку на выключение питания по перегреву проца. Ну и погонять память и проц на стресс тестах никто не мешает. Для этого только флешка нужна с ливсиди. Посмотрите как себя все железо ведет. Там и определитесь.
    1 point
  19. То есть в рамках одной DSM, без переустановки. Только перенести данные , так ?
    1 point
  20. на всякий случай уточните, что в данном случае означает "по сети" - это как/чем?
    1 point
  21. Да завсегда на здоровье ....)))
    1 point
  22. Почитайте комментарии тут: https://github.com/SynoCommunity/spksrc/issues/4897 У вас отсюда скачивает файл ? - https://curl.se/ca/cacert.pem
    1 point
  23. Так вроде в ссылке чел пишет про Пятёрку, что "Всё точно так же" Хотя лично утверждать не буду, ибо это было так давно..... Надо просто испробовать все варианты
    1 point
  24. В Центре пакетов, но если он не подходит к вашей модели, то вы его не увидите. Про проц я намекал выше.
    1 point
  25. Nevermind All works fine Works even with Exos 14TB
    1 point
  26. На форуме. Где то на форуме.... Но надо учитывать пропускную способность М/П. Не всегда много SATA хорошо Вот, одно из обсуждений : https://xpenology.com/forum/search/?q= jmb585&quick=1&type=forums_topic&nodes=4
    1 point
  27. Да вроде всё в норме https://bafista.ru/synology-web-station-v-dsm-7-2-ili-kak-sozdat-svoj-sajt/#Получение_бесплатного_сертификата_для_сайта
    1 point
  28. На етом железе должен завестись Arc последней версии + 918+ dsm7,2. Если не заведется AME codec и videostation, то можно ставить plex или emby, ето точно работает, в том числе и из интернета при наличии белого ip.
    1 point
  29. Немного пространно вы пишите и не сразу понятно что вы хотите...... Если вы хотите обновить вашу нынешнюю DSM до последнего Апдейта, то это делается из панели управления или же, если есть желание, то обновление DSM вручную Если же вам необходимо обновить DSM на следующую версию (Пример: 7.2 на 7.9) , то необходимо выяснить, поддерживает ли версия вашего загрузчика эту версию обновления. И естественно надо будет начинать с обновления загрузчика, Arc вам предложит Фулл апгрейд и одной командой можно обновить и загрузчик и версию DSM. Это удобно и других действий предпринимать не надо
    1 point
  30. This project started about two weeks ago at the suggestion of @wjz304 . A guide that can be processed with Jun's loader in DSM 6 already exists as shown below. This method requires a lot of manual work through MS Windows. Redpil plans to create a simpler automatic script as a menu function. https://github.com/PeterSuh-Q3/tinycore-redpill/blob/main/menu_m.sh#L1688 The part where tcrp-mshell is slightly different from rr is tcrp, as its name suggests, is a redpill loader that uses tinycore Linux, so it includes one more kernel. The kernels used by rr and tcrp are as follows. 1. rr kernel (tcrp is friend kernel) 2. dsm kernel (same for tcrp) 3. tc kernel (tcrp only) rr contains all the functions that the tc kernel and friend kernel must perform in the rr kernel. This is why the menu starts directly with ./menu.sh in the rr kernel. The reason I explained these kernels is Ultimately, these kernel files (2 per kernel) must be ported to the hard drive. The existing DSM 6 Jun's loader had a kernel size of only 50M, so 100M of spare space at the end of the first hard drive was sufficient. However, Red Pill is equipped with various kernels, and the files for each kernel are close to 100M. 1. tc kernel (20M, mydata.tgz backup file is variable) 2. Friend kernel (61M fixed size) 3. dsm kernel (based on ds3622xs+ 7.2.1-69057, 82M initrd-dsm is variable [including driver modules and addons for each model]) The loader on the original USB stick is all in the 3rd partition with a lot of free space. It is impossible to store all of this in 100M on one hard drive. Give up less and only take items 2 and 3 and use 2 hard drives. Two hard drives created as Basic or JBOD type are required. Assuming that the structure of each hard drive on which the storage pool is created is of the above two types, It consists of system partition 8G + 2G and data partition (the entire remaining area). I thought there was only about 100M space behind the data partition. If you look closely, there is about 128M more free space between the system partition and data partition. You will see that the Start / End sectors are not connected and are empty. In the meantime, create an extended partition, sd#4, and create additional logical partitions where the bootloader partitions should exist. This capture shows bootloader partitions 1, 2, and 3 split into two hard drives. The first partition has 98M space. Contains the friend kernel from number 2 above. Because the location of the kernel changed, modifications were made to a separate grub.cfg. The existing boot loader searches for (hd0, msdos1) and includes the part where grub is set to boot. Use grub-install to readjust it to point to (hd0,msdos5) = /dev/sd#5. Activate /dev/sd#5, which corresponds to the first partition of the boot loader, to Active so that the hard drive can boot grub on its own. The second partition does not require a lot of space, but The important part contains rd.gz extracted from the original dsm pat file. When an update for SmallFixVersion is detected, it automatically assists in update processing through Ramdisk automatic patching. Currently, DSM 7.2.1-69057 is a file required to automatically update U0 to U4. In the 3rd partition The DSM kernel for each model is included. This is a kernel file that keeps changing and being regenerated every time you rebuild the loader. The intermediate file custom.gz (contains rd.gz and the driver) is also included. Because the size is not trivial, the final result, initrd-dsm, contains almost the same content. We have found a way to exclude it and have recently reflected it in the friend kernel version upgrade in advance. In the case of rr, the size of custom.gz and initrd-dsm contains too many modules (e.g. wifi module, etc.) compared to tcrp. As it is, only 2 hard drives are insufficient. I am not sure if wjz304 is well aware of this and is adjusting the kernel size related to this. With this preparation in place, you can boot with the bootloader implanted using only two BASIC type hard drives. For this purpose, remove the original bootloader, USB or SATA DOM bootloader. Up to this point, I have implemented the bootloader script and completed the first test. Following this topic, I would like to separately explain the problems and solutions I would like to consider.
    1 point
  31. Another update: I did a fresh installation using DS920+ as system definition. The power off button works as expected. Still is reported as "static", but at this point I don't think that would be relevant. alamo@MHP-TEST:/$ cat /proc/modules | grep button button 5161 1 i915, Live 0xffffffffa0169000 This time @IG-88's suggention produces result. So, basically it boils down to the DS3622xs+ choice, I guess. It's time to understand why it doesn't work with that
    1 point
  32. А там виден ваш девайс ? Войти мало, важно что бы Сино определило вашу модель
    1 point
  33. Ставил ARC на несколько разных серверов друзьям. Одинаковые модели (DS3622xs) и естественно серийники. При регистрации в Synology первый регистрируется (на мое имя) и позволяет создать QC запись. Следующий сервер с этим же серийником при регистрации говорит, что такое устройство уже есть (с другим именем) и предлагает его заменить, по сути переименовать. Таким образом, для одного аккаунта возможно только одно устройство с "уникальным" серийником. Для разных аккаунтов, это наверное не важно и один серийник можно использовать (пока). Если не требуется регистрация и QC, то просто для проверки валидности серийника и установки кодеков или валидации Active Backup и тому подобному одинаковые серийники не мешают.
    1 point
  34. Попробуйте эту: https://cloud.mail.ru/public/iWnh/YrazWtvU9 Сначала просто Патч, они как правило универсальные. У меня эта версия работает. Репаки от elchupacabra хорошие, но зачастую работают только Портативки И на всякий случай
    1 point
  35. @dyter, @dimakv2014 - sorry guys, but you've already gone far away from the topic ("Develop and refine the DVA1622 loader") - can you move your discussion to another thread?
    1 point
  36. Патч даёт валидную пару. На основе этой пары происходит Видимость устройства в Сино Аккаунте при регистрации. Если там видно устройство, значит Сино его приняло. Регистрация без видимости ничего не стоит Да. Сейчас четыре, а было девять. Все видимы
    1 point
  37. А это сложно ? http://packages.synocommunity.com/ Через "Центр пакетов"
    1 point
  38. Просто зайти в "Центр пакетов" и там выбрать ffmpeg 4
    1 point
  39. https://bafista.ru/synology-ustanovka-zerotier-ili-kak-podklyuchatsya-bez-belogo-adresa/ Ну и до кучи: https://bafista.ru/dostup-k-synology-bez-belogo-ip-adresa-s-pomoshhyu-tailscale/
    1 point
  40. Yesterday I fixed two Typo in a function of the AME's License Patch (option P), please try again, It must be working fine in all cases. https://github.com/darknebular/Wrapper_VideoStation Best regards and sorry.-
    1 point
  41. Пока только диаметр и материал проводов измеряли. Длина - в следующем сезоне и то, при условии, что оставшиеся "лишними" амперы, объединившись с ваттами, штурмом, нахально не залезут в нук и не спалят его дотла.🤪
    1 point
  42. А вата ? Вата ватная.....)))) Ватты, это. Если по простому, ВольтоАмперы ВА. Вольты помноженные на Амперы и образуют Ватты Ну Ампераж, величина немного эфемерная, особливо если брать китайские поделия. Пишем пять, подразумеваем три. Потому избыток карман не тянет, а нехватка пагубно влияет на прибор Естественно с большим Амперажем, то есть с запасом по мощности. В силу избыточности по мощности, он будет меньше греться, так как нагружен будет не полностью Если цена их где то рядом, то только больший Ампераж, если сильно разнится, то уже сами решайте
    1 point
  43. Сколько я сталкивался с питаловым от Асуса, могу сказать, очень надёжные блоки. Этот как раз по вашим параметрам. Можно выше (не обязательно), но не меньше
    1 point
  44. На Авито посмотрите, там много Б/У блоков от ноутов. Ассусы, Самсунги, НР...... Да любые брендовые, лишь бы не ниже 19в 4а. Если штекер не подойдёт, стандарты разные, то перепаять не сложно Хм..... Выше вы давали ссыль на 12вольт Б/П, тут тоже о 12в. пишите, а на картинке у вас 19 вольт. Уточните К слову говоря, 19 вольт, это стандарт для Ноутбуков и найти брендовый проще. Asus неплохие делает. Посмотрел только что на Авито, там их масса .... От 500 до 1000 Как пример: https://www.avito.ru/sankt-peterburg/tovary_dlya_kompyutera/blok_pitaniya_asus_3832527007
    1 point
  45. Уважаемый Flober Поправьте заголовок, а то очень не двусмысленный посыл получается.....)))) Не ХРЕН, а ХРЕНЬ. То есть "Мягкий знак" в конце слова надо добавить
    1 point
  46. XPENOLOGY is a program that hacks the limitations of the specifications of the genuine product. What you need to consider for the Ethernet card part is devices other than the genuine support list. There just isn't enough verified feedback data for the Ethernet modules (recompiled and manufactured by Redpill) used by each chipset. Sometimes, if the Ethernet module provided by Redpill does not work or is unstable, it may be removed and replaced with the original module originally provided by Synology (called a vanilla module). So far, the modules below have been such cases. In the case of DS920+ Gemini Lake, there was no such case. https://github.com/PeterSuh-Q3/arpl-modules/tree/main/vanilla/geminilake-4.4.302 In the case of DS3622xs+ Broadwell NK, the ixgbe and Mellanox modules are replaced with Vanillo modules and passed. https://github.com/PeterSuh-Q3/arpl-modules/tree/main/vanilla/broadwellnk-4.4.302 In the case of AQC107, it seems necessary to check in detail whether the module used is aqc111.ko or whether the Vanillo module works well enough. ------------------------------------------------------------------------------------------------ Also, here is additional information about the detailed chipset of Synology's genuine Ethernet. E10G17-F2 : Mellanox ConnectX-3 Pro CX312B E10G18-T1 : Aquantia AQC107-B1 E10G18-T2: Marvell QL41102 (MAC) + BCM84886 (PHY) E10M20-T1: Aquantia AQC107 (built-in PLX PCIe switch and 2EA M.2 slots) E10G21-F2: Intel X710 E25G21-F2: Intel XXV710 (estimated) E10G22-T1-Mini : Aquantia AQC107 E10G30-T2: Broadcom BCM57416 (estimated) E25G30-F2: Broadcom BCM57414 (estimated) Model name - If it starts with T, it is 10GBASE-T (RJ45), if it starts with F, it is SFP+ or SFP28, and the last number is the number of ports. E10G18-T1, E10M20-T1, and E10G22-T1-Mini also support 2.5G/5G standard IEEE 802.bz.
    1 point
  47. я прозевал как сожрало все 100гб так что SS не запускался даже, пришлось в телнете удалить папку и потом уже тормознуть службу В общем на Asrock J4125 завел DVA1622 в ней виртуалку и еще одну DVA1622
    1 point
  48. Hi, Adding all active repositories is now simpler with Synopackage Proxy Repository. You may add one link to Package Center: https://synopackage.com/repository/spk/All and Synopackage will query for you all active repositories under the hood and gives you combined response ;) More info at: https://synopackage.com/repository I plan to work on personalized repositories, so user could choose which repository to include in the link (no estimation date for now). For now there are two choices: All & SynopackageChoice.
    1 point
×
×
  • Create New...