Jump to content
XPEnology Community

Drivers requests for DSM 5.2


Recommended Posts

Hi, Thanks for the great work.

XPEnology DS3612xs DSM 4.3 build 3810++ (repack v1.0) works great, but it's not picking up my LSI RAID cards 9211, this worked in XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2). Can these drivers be added please?

 

Also as I understand it, in the DSM 4.2 build 3211++, it picks up the mpt2sas drivers to late in the boot process, so it have to repair the system partition on the drives attached to LSI RAID cards 9211 every reboot. Is it possible to fixed this?

Again thank you.

Link to comment
Share on other sites

Hi Trantor, can't thank you everyone enough for all of your hard work.

 

I would love to be able to use my Intel SS4200-e NAS appliance with this, everything works just fine except the PATA port (which i really need to boot from) to keep my four sata ports available for data.

 

It uses an Intel 945GZ chipset with the ICH7-R controller..

 

I tested this with Ubuntu 12.04 64bit iso and was able to install and boot off of the pata port as long as the "pata_legacy" module is available and loaded at boot.

 

If I could get that pata_legacy.ko module included, that would be awesome. Thanks again.

Link to comment
Share on other sites

Hi not sure if this is the correct place or not, but would it be possible to integrate the power button handler for the HP Microservers as discussed in this thread: Power off from the buttom(sic). Although what is discussed there works, the implementation uses a complete rebuild of busybox, renamed as the kind contributor that did it didn't want to risk messing anything else up in the busybox pack. If it was integrated then this shouldn't be an issue? - Thanks again :smile:

Link to comment
Share on other sites

If possible, please add driver for ITE 8212F raid controller.

 

Download page isn't working on the website. I send a email for support.

 

If possible, please add driver for Adaptec 5805z raid controller.
LSI RAID cards 9211. Can these drivers be added please?

 

I done something wrong with aacraid and mpt2sas drivers. Will be fixed soon.

 

DSM 4.3 build 3810++ (repack v1.0) is not working with ARECA arc-1220 SATA II RAID Card.

please, add driver, ARECA arc-1220....

 

Strange because arcmsr driver is built-in the kernel

 

one major issue, when you log in to the server via web browser it write on the center low area of the screen XPEnology 4.3 with a ugly font, the synology sign is much better ha ha ha :smile:

 

[attachment=0]xpenology43.png[/attachment]

 

Why not make a topic with some poll for XPEnology logo ?

Link to comment
Share on other sites

Hi,

 

Hi, Thanks for the great work.

XPEnology DS3612xs DSM 4.3 build 3810++ (repack v1.0) works great, but it's not picking up my LSI RAID cards 9211, this worked in XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2). Can these drivers be added please?

 

Also as I understand it, in the DSM 4.2 build 3211++, it picks up the mpt2sas drivers to late in the boot process, so it have to repair the system partition on the drives attached to LSI RAID cards 9211 every reboot. Is it possible to fixed this?

Again thank you.

 

I have the same dream :smile:

Thank you for your great job.

regards

Link to comment
Share on other sites

Hi Trantor,

 

Thanks for all your work and dedication!

 

Could you please include the following driver in the next release? I tried loading the newest build without luck. (XPEnology_DS3612xs_3810-repack-trantor-v1.0)

 

Highpoint Rocketraid 2720SGL

http://www.highpoint-tech.com/USA_new/C ... ation.html

 

I believe this is the correct driver:

http://www.highpoint-tech.com/BIOS_Driv ... 732.tar.gz

 

Thanks!

Link to comment
Share on other sites

Hi Trantor!

 

Thanks for answer.

 

Adaptec 5805z dirver google drive download link.

 

AACRAID Driver for Debian 5.07, 6.0 and Ubuntu 10.04, 10.10, 11.04 - http://goo.gl/ktYfmE

 

AACRAID driver for RHEL 4 & 5, SLES 9, 10 & 11, and others - http://goo.gl/7gJJH3

 

AACRAID driver for RHEL 5 6, SLES 10 11, and others - http://goo.gl/R73Pu4

 

AACRAID Driver for VMware ESX 4.1 Classic and ESXi 4.1 and 5.0 - http://goo.gl/nLlDUU

 

Linux Driver Source Code - http://goo.gl/JCIP33

 

Thanks!

Link to comment
Share on other sites

mpt2sas, aacraid and rr272x_1x drivers will be included in next beta/build

 

Hi, Thanks for the great work.

XPEnology DS3612xs DSM 4.3 build 3810++ (repack v1.0) works great, but it's not picking up my LSI RAID cards 9211, this worked in XPEnology DS3612xs DSM 4.2 build 3211++ (repack v1.2). Can these drivers be added please?

 

Also as I understand it, in the DSM 4.2 build 3211++, it picks up the mpt2sas drivers to late in the boot process, so it have to repair the system partition on the drives attached to LSI RAID cards 9211 every reboot. Is it possible to fixed this?

Again thank you.

 

I have the same dream :smile:

Thank you for your great job.

regards

 

Build latest (v17) mpt2sas driver as module, load it, DSM can now detect drives attached to my 9211-4i.

For the repair issue at every boot, I will try to build xpenology based on RS10613xs+ which officially support SAS.

Link to comment
Share on other sites

mpt2sas, aacraid and rr272x_1x drivers will be included in next beta/build

 

Build latest (v17) mpt2sas driver as module, load it, DSM can now detect drives attached to my 9211-4i.

For the repair issue at every boot, I will try to build xpenology based on RS10613xs+ which officially support SAS.

 

 

That would be awsom!!!

I was hoping to try the RS10613xs+, it has an nice new Storage Manage gui.

 

Do you have an ETA on that build Trantor?

 

Again thank you. Great work!!

Link to comment
Share on other sites

Hi Trantor, Thanks for the great work.

Please add usb cdc acm kernel module, this default module in linux kernel.

and please add support lcd4lixux(crosscompile this software http://ssl.bulix.org/projects/lcd4linux/) (usb2com and ftdi drivers).

 

thanks.

 

Sure Trantor will do it. Meanwhile, if you can't wait, you could insmod these USB to serial modules.

 

https://www.dropbox.com/s/ie5ptu7lwbld8lo/USB_to_serial_DSM_4.3_bromolow.tgz

 

I compiled them and work for me.

Link to comment
Share on other sites

Eduardo, thank you very match. i am testing this module now))

 

could you still compile usb cdc acm module ?

 

cdc-acm, usbserial and ftdio_sio modules are already included.

 

Just insmod them. (insmod /lib/modules/cdc-acm)

 

Compiled for nothing...

Up! Silly me! I wish I had been there (/lib/modules/) :shock:

 

Kudos to Trantor!

Link to comment
Share on other sites

This is an updated synoobot file which include several fixes.

Copy *.ko files to /lib/modules

 

New version available : viewtopic.php?f=2&t=1361&p=8887#p8887

 

Known issues:

- You can't install DSM on a drive connected to a SCSI/SAS controller (configuration lost on reboot)

- Volume containing drives attached to SCSI/SAS controller is "broken" on each reboot, you must click repair.

 

Changelog:


- Update synobios.ko (by k3dt ; fix "buzzer stop button pressed" warning)


SCSI
----

Highpoint Rocketraid 2720SGL
LSI mpt2sas v17
Adaptec aacraid
Intel C600 Series Chipset SAS


NETWORK
-------

3Com 3c590/3c900, 3cr990
Alteon AceNIC/3Com 3C985/NetGear GA620
QLogic QLA3XXX
SiS 900/7016 SiS190/SiS191


USB
---

USB to serial / Prolific 2303 driver


PATA
----

ATI PATA (PATA_ATIIXP)
AMD/NVidia PATA (PATA_AMD)
CMD64x PATA (PATA_CMD64X)
JMicron PATA (PATA_JMICRON)
Marvell PATA (PATA_MARVELL)
Promise PATA 2027x (PATA_PDC2027X)
Intel SCH PATA (PATA_SCH)
CMD / Silicon Image 680 PATA (PATA_SIL680)
SiS PATA (PATA_SIS)
VIA PATA (PATA_VIA)
Winbond SL82C105 PATA (PATA_WINBOND)
Legacy PATA support (PATA_LEGACY)

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...