Bob the Builder Posted December 27, 2016 Share #326 Posted December 27, 2016 да всё правильно, сама aceproxy не нужна, это просто я втупил, хотя если вместо 127.0.0.1 вбить ваш IP то может быть... в движке в команде запуска вместо --client-console можно попробовать --stream-source-node для проброса наружу --host ваш внешний IP Quote Link to comment Share on other sites More sharing options...
43nix Posted December 27, 2016 Share #327 Posted December 27, 2016 --stream-source-node --host не прокатило Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted December 27, 2016 Share #328 Posted December 27, 2016 ок, тогда --client-console и --host ваш внешний IP так как сейчас у вас host=127.0.0.1 2016-12-27 14:49:41,313|MainThread|acestream.SocketHandler.SocketHandler|bind: socket bound: host=127.0.0.1 port=62062 Quote Link to comment Share on other sites More sharing options...
43nix Posted December 27, 2016 Share #329 Posted December 27, 2016 У меня ключ стоит --bind-all, но так тоже сейчас попробовал, результат тот же -отсутствие. Я не могу понять, чем докер так отличается от реальной машины, я ведь ни один раз поднима acestream на вируалбоксе, все без проблем работает, делаю тоже самое в докере - не хочет, пробовал скачивать ubuntu в докере и уже с нуля настроить acrstream - нифига, вот казалось бы идет буферизация, проходит и тогда когда должно открыться видео, все просто скидыветься, как и не нажимал на сериал, я с этим уже год мучаюсь, время от времени, но вот сейчас решил перейти на dsm6 и оно стало актуально. Quote Link to comment Share on other sites More sharing options...
43nix Posted December 27, 2016 Share #330 Posted December 27, 2016 Такое ощущение складываться, что в докере, acestream'у нет разрешения на запись этого самого буфера на винт, и оно вылетает, но это ведь бред... Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted December 27, 2016 Share #331 Posted December 27, 2016 не знаю, в моих сборках движок настроен на live stream и кеш кидает в память, в вашей ситуации с vod stream под кеш надо сразу много места, может из за этого? Quote Link to comment Share on other sites More sharing options...
43nix Posted December 28, 2016 Share #332 Posted December 28, 2016 а как понимать вот это "cannot access /dev/disk/by-id/: No such file or directory",до этого не обращал внимания, но при запуске движка несколько таких строк а потом уже как обычно... Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted December 28, 2016 Share #333 Posted December 28, 2016 а как понимать вот это "cannot access /dev/disk/by-id/: No such file or directory"... для работы acestream нужно, чтобы была папка /dev/disk/by-id/, при этом необязательно, чтобы в ней что-то по факту находилось иными словами на работу движка это вроде как не должно влиять можете попробовать создать эту папку и проверить root@aceproxyL2409:/# mkdir -p /dev/disk/by-id root@aceproxyL2409:/# ls -l /dev/disk total 0 drwxr-xr-x 2 root root 40 Dec 28 19:04 by-id после перезапустите движок допустим через supervisor, так как если перезапустите сам контейнер то папка не выживет(просто при при построении образа через build я упустил этот момент да и лень было) Quote Link to comment Share on other sites More sharing options...
43nix Posted December 29, 2016 Share #334 Posted December 29, 2016 проверил, не помогло Quote Link to comment Share on other sites More sharing options...
43nix Posted December 29, 2016 Share #335 Posted December 29, 2016 Вот лог запуска контейнера и самого торрента на воспроизведение, глянте пожалуйста, може вы чего в нем увидите. [spoiler=]2016-12-29 08:28:33,295|MainThread|acestream|platform=linux 2016-12-29 08:28:33,296|MainThread|acestream|app=acestream 2016-12-29 08:28:33,296|MainThread|acestream|version=3.0.5.1 code=3000501 revision=1415 date=2014-12-10 2016-12-29 08:28:33,296|MainThread|acestream|use_local_db=True 2016-12-29 08:28:33,297|MainThread|acestream|use_m2crypto=True 2016-12-29 08:28:33,297|MainThread|acestream|enable debug: 0 2016-12-29 08:28:33,298|MainThread|acestream|get_default_api_version: 2 2016-12-29 08:28:33,298|MainThread|acestream.coreapp|use fixed i2i_port: 62062 2016-12-29 08:28:33,489|MainThread|acestream.coreapp|cannot load session config, use default sh: 1: /bin/netstat: not found sh: 1: /sbin/ifconfig: not found 2016-12-29 08:28:33,508|MainThread|acestream.SocketHandler.InterruptSocket|bound on 127.0.0.1:36324 2016-12-29 08:28:33,509|MainThread|acestream.SocketHandler.SocketHandler|bind: socket bound: host=0.0.0.0 port=8621 2016-12-29 08:28:33,509|MainThread|acestream.LM|listen on 8621 2016-12-29 08:28:33,646|MainThread|acestream.VideoServer|start: addr= port=6878 2016-12-29 08:28:33,658|MainThread|acestream.SocketHandler.InterruptSocket|bound on 127.0.0.1:51111 2016-12-29 08:28:33,658|MainThread|acestream.SocketHandler.SocketHandler|bind: socket bound: host=0.0.0.0 port=62062 2016-12-29 08:28:33,659|Instance2InstanceThread-24|acestream.APIServer|run: ready to receive remote commands on 62062 2016-12-29 08:29:23,443|Instance2InstanceThread-24|acestream.coreapp|external_connection_made: ip=172.17.42.1 port=55328 myip=172.17.0.22 myport=62062 connections=1 2016-12-29 08:29:23,443|BGTaskQueueThread-1|acestream.coreapp|got command: HELLOBG 2016-12-29 08:29:23,444|BGTaskQueueThread-1|acestream.BGInstanceConnection|send HELLOTS version=3.0.5.1 version_code=3000501 key=fccfaafbe0 http_port=6878 2016-12-29 08:29:24,447|BGTaskQueueThread-1|acestream.coreapp|got command: READY key=n51LvQoTlJzNGaFxseRK-46b051812463b695f476fa35b2e9eaf111120d70 2016-12-29 08:29:24,448|BGTaskQueueThread-1|acestream.BGInstanceConnection|send AUTH 0 2016-12-29 08:29:24,449|BGTaskQueueThread-1|acestream.coreapp|got command: LOADASYNC 444948504 TORRENT http://tracktor.in/td.php?s=ArEHiA3RyrE ... GYbGvuEVG$ 2016-12-29 08:29:24,803|BGTaskQueueThread-1|acestream.BGInstanceConnection|send_load_response: request_id=444948504 response={"status": 1, "files": [["Twin.Peaks.S01E04.$ 2016-12-29 08:29:24,856|BGTaskQueueThread-1|acestream.coreapp|got command: START TORRENT http://tracktor.in/td.php?s=ArEHiA3RyrE ... O5rMdnqd3$ 2016-12-29 08:29:24,857|BGTaskQueueThread-1|acestream.coreapp|DEBUG: tfile= 2016-12-29 08:29:24,859|BGTaskQueueThread-1|acestream.BGInstanceConnection|send STATE 1 2016-12-29 08:29:24,860|BGTaskQueueThread-1|acestream.coreapp|start_download_wrapper: dlfile=Twin.Peaks.S01E04.rus.LostFilm.TV.avi fileindex=1 2016-12-29 08:29:24,860|BGTaskQueueThread-1|acestream.coreapp|start_download_wrapper: restarting old download in VOD mode 2016-12-29 08:29:28,363|Timer-Thread-33|acestream.BGInstanceConnection|start_playback: telling plugin to start playback: is_ad=0 is_interruptable_ad=0 is_live=0 url=http$ 2016-12-29 08:29:28,364|Timer-Thread-33|acestream.BGInstanceConnection|start_playback: send cmd START http://172.17.0.22:6878/content/e2f99b7 ... 000e83626$ 2016-12-29 08:29:28,367|Timer-Thread-33|acestream.BGInstanceConnection|send STATE 2 2016-12-29 08:29:59,313|BGTaskQueueThread-1|acestream.coreapp|got command: SHUTDOWN 2016-12-29 08:29:59,313|BGTaskQueueThread-1|acestream.BGInstanceConnection|send STATE 0 2016-12-29 08:29:59,313|Instance2InstanceThread-24|acestream.coreapp|connection_lost: ip=172.17.42.1 port=55328 2016-12-29 08:29:59,314|BGTaskQueueThread-1|acestream.BGInstanceConnection|shutdown: shutdownplugin=1 2016-12-29 08:29:59,314|BGTaskQueueThread-1|acestream.BGInstanceConnection|cleanup_playback 2016-12-29 08:29:59,314|BGTaskQueueThread-1|acestream.coreapp|connection_lost: ip=172.17.42.1 port=55328 2016-12-29 08:29:59,316|Timer-Thread-38|acestream.BGInstanceConnection|shutdown: shutdownplugin=1 Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted February 19, 2017 Share #336 Posted February 19, 2017 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<Мега обновление движка до версии 3.1.16>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<Бонус всё включено - готов сразу к просмотру ттв, плейлист уже внутри!>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <<<<<<<<<<<< Quote Link to comment Share on other sites More sharing options...
Kizilkum Posted February 20, 2017 Share #337 Posted February 20, 2017 Спасибо! потестим на досуге Quote Link to comment Share on other sites More sharing options...
deloza Posted February 21, 2017 Share #338 Posted February 21, 2017 Вечер добрый. Сильно не пинайте - ну ничего не понимаю. Установил докер, установил контейнер по ссылке. В описании на сайте по ссылке есть такое Для первоначальной настройки нужно запустить движок с дополнительным ключом –access-token “some_token”. Подскажите куда надо вводить эти команды. Если вводить в терминал command=/opt/acestream/start-engine --client-console --access-token 69696969 --... Терминал вываливает --client-console: command not found Спасибо Quote Link to comment Share on other sites More sharing options...
Kizilkum Posted February 21, 2017 Share #339 Posted February 21, 2017 надо подключиться по SSH к хренолоджи, потом зайти в контейнер докера возможно потребуются права рута Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted February 21, 2017 Share #340 Posted February 21, 2017 Подскажите куда надо вводить эти команды. Если вводить в терминал command=/opt/acestream/start-engine --client-console --access-token 69696969 --... Терминал вываливает --client-console: command not found Спасибо Добрый, команды вводить не нужно, всё уже введено и так в супервизоре вам нужно только выяснить порт на который у вас пробросился порт 6878 из контейнера и в браузере набирайте http://host:port/webui/app/69696969/server Quote Link to comment Share on other sites More sharing options...
deloza Posted February 21, 2017 Share #341 Posted February 21, 2017 Bob The Builder, Вот спасибки Вам огромное, все запустилось. Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted March 23, 2017 Share #342 Posted March 23, 2017 запускают новый движок http://wp.me/P4K5Dp-VB Quote Link to comment Share on other sites More sharing options...
birca1987 Posted March 26, 2017 Share #343 Posted March 26, 2017 Подскажите куда надо вводить эти команды. Если вводить в терминал command=/opt/acestream/start-engine --client-console --access-token 69696969 --... Терминал вываливает --client-console: command not found Спасибо Добрый, команды вводить не нужно, всё уже введено и так в супервизоре вам нужно только выяснить порт на который у вас пробросился порт 6878 из контейнера и в браузере набирайте http://host:port/webui/app/69696969/server Надо ли задать папку на сервере при запуске контейнера или другие параметры? Когда открываю веб интерфейс пишет "Internal server error, couldn't find resource". Sent from my ONE A2001 using Tapatalk Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted March 26, 2017 Share #344 Posted March 26, 2017 (edited) ничего не надо пробрасывать, единственное, что бы получить удалённый доступ нужно в файле «playerconf.pickle» добавить: sS'allow_remote_access' p(номер записи) I01 Брать плейлист из webui не лучший вариант! есть путь намного прямее и лучше так как новые версии движка принимают и понимают прямые запросы на потоки Edited April 9, 2017 by Guest Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted March 26, 2017 Share #345 Posted March 26, 2017 образ контейнера ace3.1 обновлён, добавлен скрипт ttv_parser.sh, перекачать! подробнее здесь Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted June 4, 2017 Share #346 Posted June 4, 2017 добавлен супер лёгкий контейнер на базе alpine Linux, всего 16 метров: https://hub.docker.com/r/sybdata/docker-noxbit Ставится на все основные 64 оси линя на которых можно поставить докер, пример команды установки: docker run -d --name=noxbit -v /opt/nox/config:/config -v /opt/nox/log:/var/log -e PGID=0 -e PUID=0 -p 6689:6689 -p 6881:6881 -p 6882:6882 -p 6883:6883 -p 6884:6884 -p 6885:6885 -p 6886:6886 -p 6887:6887 -p 6888:6888 -p 6889:6889 -p 6890:6890 -p 6891:6891 -p 6892:6892 -p 6893:6893 -p 6894:6894 -p 6895:6895 -p 6896:6896 -p 6897:6897 -p 6898:6898 -p 6899:6899 -p 6900:6900 sybdata/docker-noxbit тестировалось на vps-server на базе ubuntu 17.04 1 Quote Link to comment Share on other sites More sharing options...
b0g0m0l Posted September 14, 2017 Share #347 Posted September 14, 2017 On 26.03.2017 at 6:38 PM, Bob the Builder said: образ контейнера ace3.1 обновлён, добавлен скрипт ttv_parser.sh, перекачать! подробнее здесь Помогите с установкой, установил docker, подключился Putty выдало следующее. Что делаю не так Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted September 14, 2017 Share #348 Posted September 14, 2017 где вы устанавливает? Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted September 14, 2017 Share #349 Posted September 14, 2017 (edited) 6 часов назад, b0g0m0l сказал: Что делаю не так только сейчас заметил вы заходите как пользователь, так вас не пустит, нужно root получить! login as:admin admin@192.168.178.92's password: admin@916:~$ sudo -i Password: root@916:~# P.S. актуально сейчас эта сборка, подробнее здесь Edited September 14, 2017 by Bob the Builder 1 Quote Link to comment Share on other sites More sharing options...
Bob the Builder Posted September 14, 2017 Share #350 Posted September 14, 2017 если из консоли устанавливаете то docker pull можно за ненадобностью пропустить, а сразу набирайте: docker run -d --name a31 -p 8621: 8621 -p 62062: 62062 -p 9944:9944 -p 9903:9903 -p 6878:6878 -p 8000:8000 sybdata/ace3.1-as 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.