Jump to content
XPEnology Community

Asrock Q1900-ITX/Q1900DC-ITX


Recommended Posts

Hello everyone.

 

I would like to make me a computer with xpenology

 

I am very fascinated by the asrock q1900-itx. bay trail 10w with 4 sata.

 

I read in the forum that some users have problems with USB ports.

 

I want to know that the problems have been solved with the nanoboot 5.0.3.1 and with the bios update 06/03/2014 1:20 1. Improve USB compatibility.

2. Update CPU code.

 

those of you who have this motherboard that can tell me if the motherboard and now '100% compatible with xpe?

and if the usb3port are recognized.

 

also the performance of the bay trail are better than n54l?

 

sorry for these questions, but I am very careful to consumption and this motherboard is 'really interesting

 

thanks for the answers

Link to comment
Share on other sites

Hello tomcarmen,

I bought GIGABYTE J1800N-D2H, but I could not get USB ports Xpenology, I tried various settings and BIOS version. I went back to the seller and bought Asrock Q1900-itx.Motherboard is fully functional, USB2, USB3, WOL.I test Nanoboot x86 (DS214 +) and x64 (DS3612xs), all working.Excelent board not only for Xpenology.

Link to comment
Share on other sites

Hi,

I bought a MSI J1800I, but I got problems when uploading files (looks like stuttering)

See here (first pic is upload, second is download)

http://xpenology.com/forum/viewtopic.php?f=6&t=3375#p20032

 

How does the Asrock Q1900 performs when uploading a big file (>4GB)?

Thanks.

 

p.s. using NanoBoot-5.0.3.1 and DSM_DS3612xs_4493.pat

I try also different cables/ switches and an additional nic (HP NC110T)

Edited by Guest
Link to comment
Share on other sites

Yup, that's how I have it. 4HDDs in SHR-1 on a Q1900-ITX that has 2x SATA2 and 2x SATA3

But also planning to insert a mSATA half size SSD directly in the board (yes there is a slot for mSATA half size SSD) for a hypervisor and to use DSM in a VM.

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

I'm sorry but I want to make a raid 5 configuration with this board.

I saw in specs that it has 2 controllers with each 2 connections.

I want to make one raid 5 with those 2 controllers.

 

Or does someone know a cheap raid card that is supported by xpenology?

Link to comment
Share on other sites

I've got the same board on order. Looks like ESXI doesn't work now. How are you going to use virtualization on this board?

 

Thanks

 

I'm a beta user at VMware for vSphere and currently there are in beta with vSphere 6.0. I asked them on their forums how can i do it and got 2 replies with some boot parameters:

 

My backup is not yet finished so i don't want to start before it reaches 100%. Try the following if you are quickier:

 

https://communities.vmware.com/message/2399321#2399321

Link to comment
Share on other sites

hmm, i have the latest BIOS i could download and install from their own bios :smile:

If it's needed, i will update manually to the latest update 1.20

not sure what version i have now. i'm at work and the nas is, well... at home

thanks for pointing this to me.

Link to comment
Share on other sites

you're welcome.

 

then you need to ask fufik65 if there are particular configurations in the bios.

 

tomorrow I'll get the mother board

 

let me know if you solve.

 

also 'cause I read in the German forum of another user which has the same mb which runs all

Link to comment
Share on other sites

Hello tomcarmen,

bios setting is very easy,latest version 1.20.ADVANCED-SUPER IO CONFIGURATION..disable serial ans paraller port.ADVNACED-USB COnFIGURATION...all enable.BOOT-CSM...enable and all set to LEGACY.Good luck

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...