mahojazz Posted April 29, 2017 Share #1 Posted April 29, 2017 Hi. I am using an addon card for more sata ports. Its a syba 8port pci-e 2.0 x1 card. Model number is SD- PEX40104. it uses marvell chipset, 88SE9215 and 88SM9705. Xpenology 5.2 build 5967.1 managed to detect 4 ports that is at the top, but the other 4 ports at the sides are not detected. Motherboard's 2x sata ports are also detected. Does anyone know the problem? I went thru compatibility table and found marvell 9215 chipset is supported. Does port multiplier 9705 need to be supported as well? Thanks. Sent from my SM-N910G using Tapatalk Quote Link to comment Share on other sites More sharing options...
mahojazz Posted April 29, 2017 Author Share #2 Posted April 29, 2017 Did a search and found out that port multiplier is not supported by synology. Guess i ran out of luck. Sent from my SM-N910G using Tapatalk Quote Link to comment Share on other sites More sharing options...
NeoID Posted April 29, 2017 Share #3 Posted April 29, 2017 I use a LSI SAS 9201-16i which works perfect. The only thing that doesn't work with the card is SNMP. Quote Link to comment Share on other sites More sharing options...
mahojazz Posted April 30, 2017 Author Share #4 Posted April 30, 2017 I use a LSI SAS 9201-16i which works perfect. The only thing that doesn't work with the card is SNMP. Yes. I saw LSI to be supported in the hardware list. Being a low cost built, i am gonna stuck with 6 ports sata, 4 from the card, 2 from motherboard. Thanks. Sent from my SM-N910G using Tapatalk Quote Link to comment Share on other sites More sharing options...
mahojazz Posted April 30, 2017 Author Share #5 Posted April 30, 2017 Found a LSI SAS2008- 8i. Support 8 sata. Gonna get it. Sent from my SM-N910G using Tapatalk Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.