Jump to content
XPEnology Community

Virtual DSM Manager - Impossible to enable


worms

Recommended Posts

Hi guys,

 

I have a working Microserver G8 with DSM 6.0.2 u9

Last day I have try to activate and setup Virtual DSM Manager but I can't arrive at the end of first setup.

 

It ask to me to manage network connection and create a cluster (I have 2 ethernet connection with both static ip).

When I say "yes" he said that "can't create..." (I don't remember the message).

 

Anyone are using this system to virtualize anythings?

Thanks in advance.

Link to comment
Share on other sites

Thanks a lot for helping me, sorry for my bad english.

 

I'll try with image :grin:

 

Network config

xQXHkrWm.png

 

Step1

CLZpVdYm.png

 

Step2 - Volume selection

TMK8384m.png

 

Step3 - LAN selection

1xf69aSm.png

 

Step3.1 - First warning

24ZF4Vzm.png

 

Step3.2 - The ERROR

k16jQiAm.png

 

If I select the second NIC I'll get the same error.

Both NIC are connected to the same router, with 2 different IP (like u can see)

What can be?

 

I need to have 2 working Synology?

Link to comment
Share on other sites

2017-03-20T10:51:48+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_check_status[28880]: ccc/service.cpp:892 Failed to write /tmp/ccc/cache.etcd.state.json

2017-03-20T10:51:55+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/host.cpp:1492 Start to create cluster

2017-03-20T10:51:55+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/host.cpp:1295 Start check before host init

2017-03-20T10:51:55+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: extent_pool_rodsp_key_get.c:16 open(/config/rodsys/local_key, O_RDONLY) failed, err=No such file or directory

2017-03-20T10:51:55+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/host.cpp:127 GetLocalStorageKey(): SYNOExtentPoolRODKeyGet(0x7ffe682441e0, 13) failed, err=Failed to open file

2017-03-20T10:51:55+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/host.cpp:1313 Failed to get storage key

2017-03-20T10:51:55+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/host.cpp:1638 Rollback create cluster

2017-03-20T10:51:55+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/service.cpp:246 service pkg-synohostcmdd ...[1]

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/service.cpp:246 service pkg-synohostcommd ...[1]

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/service.cpp:246 service pkg-synocccd ...[1]

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/service.cpp:246 service pkg-libvirtd ...[1]

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/service.cpp:246 service pkg-etcd_hyper ...[1]

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/service.cpp:246 service pkg-etcd ...[1]

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: core/utils.cpp:390 Failed to get register_ovs_by_ccc[0x0900 file_get_key_value.c:29]

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: core/utils.cpp:390 Failed to get register_ovs_by_ccc[0x2000 file_get_key_value.c:81]

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: ccc/host.cpp:1391 OVS is not enabled by virtualization, skip unregister

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create_SYNO.CCC.Cluster_1_create[29036]: Cluster/cluster.cpp:231 Failed to create cluster, [401]

2017-03-20T10:51:56+02:00 ITData synoscgi_SYNO.Virtualization.Cluster_1_create[29036]: Cluster/Cluster.cpp:56 Bad response [{"error":{"code":401},"httpd_restart":false,"success":false}]/ request [{"addr":"172.16.16.1","api":"SYNO.CCC.Cluster","method":"create","version":1,"volume_paths":["/volume5"]}]

2017-03-20T10:54:56+02:00 ITData kernel: [ 294.790449] hpilo 0000:01:00.2: Closing, but controller still active

 

 

ovs_eth0 Link encap:Ethernet HWaddr 00:11:32:D8:09:76

inet addr:192.168.1.240 Bcast:192.168.1.255 Mask:255.255.255.0

ovs_eth1 Link encap:Ethernet HWaddr 00:11:32:FF:AD:E8

inet addr:172.16.16.1 Bcast:172.16.16.255 Mask:255.255.255.0

 

 

I have the same error.

Same with Open vSwitch on or off.

 

Using XPEnology bootloader for DSM 6.0.2-8451.5.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...