timgjr Posted February 21, 2017 Share #1 Posted February 21, 2017 Anyone check to see if Jun Loader works with 6.1 yet? Also, didn't Synology say they were publishing Source finally upon release of 6.1? Quote Link to comment Share on other sites More sharing options...
niedi74 Posted February 21, 2017 Share #2 Posted February 21, 2017 https://global.download.synology.com/do ... _15047.pat Gesendet von meinem SM-G900F mit Tapatalk Quote Link to comment Share on other sites More sharing options...
sze Posted February 21, 2017 Share #3 Posted February 21, 2017 Check it with my fresh install environment (ESXi 6.5) but it doesn't work. Get always Error [7] at the serial. It find an older version and try to recover. Recover runs for ever. Need to change disk and install a 6.0.2 over. That works fine. Quote Link to comment Share on other sites More sharing options...
niedi74 Posted February 21, 2017 Share #4 Posted February 21, 2017 Oh, what a pity ;( Gesendet von meinem SM-P605 mit Tapatalk Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted February 22, 2017 Share #5 Posted February 22, 2017 It wont work. Jun's loader is based on DSM 6.0.2 Beta branch 7274. The code has certainly changed with 6.1. Quote Link to comment Share on other sites More sharing options...
jokerigno Posted February 28, 2017 Share #6 Posted February 28, 2017 Thank you for your feedbacks. We will wait then. Quote Link to comment Share on other sites More sharing options...
dynax Posted February 28, 2017 Share #7 Posted February 28, 2017 If you use ESXi 5.5 (or newer) 1) Use this loader (jun's) https://mega.nz/#!5koz0ZjZ!SLWdLCD2db22 ... m-aJQ4w2gI 2) Add a HDD 3) Then download the 6.1 pat file (DSM_DS3615xs_15047.pat) and install that That is a clean install. If you want to upgrade from your previous DSM. then skip step (2). Reboot and you are done. Quote Link to comment Share on other sites More sharing options...
CrazyFin Posted March 8, 2017 Share #8 Posted March 8, 2017 I am using Jun's loader v1.02a for DSM 6.1 on my baremetal setup and it is working nice indeed. Had some trouble with 2 of my 8 disks being seen as eSata disks until I figured out to mod the internalportcfg-setting in /etc/synoinfo.conf and /etc.defaults/synoinfo.conf (See my thread http://xpenology.com/forum/viewtopic.php?f=2&t=30258 on how I solved it.) Working really nice now! I also took the step and added 3x3TB SATA disks to 3 of the motherboard internal SATA connectors, changed internalportcfg setting: from binary 0011 1111 1100 0000 = 0x3fc0 (i.e. zeroes on the 6 first positions since I do not have any disks connected to the mobo Asus P7F-X sata ports) to binary 0011 1111 1111 1000 = 0x3ff8 (i.e. zeroes now on the 3 first positions only since I have 3 SATA disks connected and the other 8 are connected to my LSI-controller) Rebooted the system and when I started to greate a separate disk group of the 3 new disks added I could not choose SHR as the raid type but some searching here on the forum quickly enlightened me that I needed to comment out / delete support_raid_group = "yes" then add support_syno_hybrid_raid = "yes" in /etc.defaults/synoinfo.conf and /etc/synoinfo.conf and reboot and voilaaaa! My 2nd disk group is now also up and running in SHR mode with BTRFS-filesystem. Cool! Quote Link to comment Share on other sites More sharing options...
alientm Posted March 21, 2017 Share #9 Posted March 21, 2017 If you use ESXi 5.5 (or newer) 1) Use this loader (jun's) https://mega.nz/#!5koz0ZjZ!SLWdLCD2db22 ... m-aJQ4w2gI My ESXi 5.5 can not see the file DSM_6.1-disk1.vmdk when i try to add HDD (Use an Existing Virtual Disk), any suggestion ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.