Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby paranco » 09 Feb 2017 18:52

Thank Polanskiman, and all other users
With your help I was able to update my Asrock motherboard C2250D4i to DSM 6.2 update 8

Thanks again...
paranco
 
Posts: 6
Joined: 10 Oct 2016 13:17

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby jack78 » 09 Feb 2017 21:08

jaithn wrote:Hello everybody,
thank a lot for the tutorial. It worked!

One question though, DSM Info shows as a Prozessor "INTEL Core i3-4130 with 2 Prozessors à 3.4 GHz". But I have installed an i5-7500 with 4 Processors à 3.4 GHz. Is this only a mistake in the info-screen or do I need to do something to adjust this?

Thanks,
Jaithn


This is normal.
Speed is real, but procesor model is wrong, on every Xpenology.
HP Microserver Gen8 - i3-3220T, 4GB RAM, 4x3TB WD RED - DSM 6.0.2-8451 Update 8
HP Microserver G7 N40L - for test (or for sale) - DSM 6.0.2-8451 Update 8
jack78
 
Posts: 14
Joined: 04 Sep 2013 19:20

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby H_U_L_K » 09 Feb 2017 21:42

After migration from 5.2 to DSM 6.0.2-8451 update 8, quantity of RAM shows 8 gb, but instaled only 4.
I think it's similar to the situation with the processor, and the performance is not affected.
I have intel atom 2*1,6 ghz cores.
H_U_L_K
 
Posts: 10
Joined: 05 Feb 2017 21:43

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby dotslash » 10 Feb 2017 20:18

Hello world. I have a DSM 5.2-5644 upd 5 on HP Micro Server Gen8 with 1610 Celeron upgraded to DSM 6.0.2 8451 upd5 by jun's loader.

Question:
Can upgrade to DSM 6.0.2 8451 upd9 by control panel?

thanks

ooooookkkkay

Polanskiman wrote:
To everyone:
I recommend not to update to update 9. Some people are experiencing issues. A hard reboot may fix the problem in some instances but this does not seem to fix the issue for everyone, so stay on update 8 until further notice. Tutorial has been updated accordingly.
dotslash
 
Posts: 26
Joined: 24 Jan 2016 17:15

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby jack78 » 10 Feb 2017 21:16

You can, but i don't recomend. Use update8 in manual update from 1 post.
HP Microserver Gen8 - i3-3220T, 4GB RAM, 4x3TB WD RED - DSM 6.0.2-8451 Update 8
HP Microserver G7 N40L - for test (or for sale) - DSM 6.0.2-8451 Update 8
jack78
 
Posts: 14
Joined: 04 Sep 2013 19:20

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby spyrule » 12 Feb 2017 23:53

Does anybody know of the drivers for the Mellanox ConnectX2 cards are included in this build ?
spyrule
 
Posts: 52
Joined: 07 Oct 2013 04:24

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby mervincm » 13 Feb 2017 01:34

I suspect there may be driver issues with the three types of 10G cards I own.

OEM of Intel SFP+
-shows up but will neither accept a static IP nor a DHCP address, instead defaulting to a 169.x.x.x
-Firmware up to date
-Intel 82599 chipset (not listed specifically but it is seen and part of intel bundle so I "hoped" it would work)
-work OK in XPenology 5.2

IBM OEM 42C1792
-Broadcomm NetXtreme 2 (bnx2x) (listed and should work)
-firmware bnx2x-e1-7.0.29.0,
maybe firmware is not in correct locations (in 5.x it was copy bnx2x-e1-7.0.29.0.fw into /lib/firmware/bnx2x)
-shows up accept a static IP, good Write performance (400-800 MB/sec) terrible Read Performance (1-2 MB/Sec)
-Broadcomm BCM57710
-work OK in XPenology 5.2

Mellanox ConnectX-2 1 Port SFP+
-firmware=unknown
-not listed, not expected to work.
-not seen on boot, stops boot progression in fact.
-works OK in Windows test
mervincm
 
Posts: 61
Joined: 14 Jun 2014 06:04

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby orzyl » 13 Feb 2017 15:12

To which version can I upgrade my HP N40L (now i have 5.1, but can upgrade to 5.2 5644.5), to have phpvirtualbox working ?
Is it safe to upgrade? I need phpvirtualbox and working ACL on encrypted folders.
Please - if anybody knows, don't leave this post not replied. ;)
orzyl
 
Posts: 11
Joined: 11 Feb 2016 23:07

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby fonix232 » 13 Feb 2017 20:13

Are there any news about update 9? It isn't really specified what issues it is causing, and I can't see much about related topics either.
HP EliteBook 8530W - not a powerhouse, but serves my movies.
fonix232
 
Posts: 207
Joined: 10 May 2013 14:24

Re: Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader)

Postby billat29 » 13 Feb 2017 21:40

fonix232 wrote:Are there any news about update 9? It isn't really specified what issues it is causing, and I can't see much about related topics either.

It's been running on my N54L (disclaimer: There's a HP NC360T card in it) for at least 10 days. So far without me noticing any problems.
Hardware: N54L; 6GB ECC RAM; HP NC360T NIC; 3x4TB HDD
XPEnology: jun 1.01 loader; DSM 6.0.2-8451 update 9
billat29
 
Posts: 98
Joined: 25 May 2014 20:17

PreviousNext

Return to XPEnology General discussion



cron

x