livearyan Posted October 28, 2016 Share #776 Posted October 28, 2016 I have a GA-H170N-WIFI but only 1 LAN is working. Intel I219V chip and the other one controlled by an Intel I211AT chip. in DSM network shown I have 2 LAN. but actually 1 is not working. Anything I can troubleshoot here? Same here ! Only one works. If i use the mac of the realtek lan, the realtek works. If i use the mac of the intel lan, the intel work. They work only as one, not both of them work. I have to set mac1=MAC, when i set mac2=MAC (this isn't working). my grub: ------ serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='1' set fallback='0' insmod part_msdos insmod part_gpt set locale_dir=$prefix/locale set lang=en_US menuentry 'Synology DS3615xs' --class os { insmod fat linux $img/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 vid=0x0781 pid=0x5580 console=ttyS0,115200n8 sn=C8LWN00821 mac1=408D5CFFDEDA mac2=408D5CFFDEDG withefi elevator=your_magic_elevator quiet set img=$prefix/../image/DS3615xs initrd $img/ramdisk.lzma } ------ Quote Link to comment Share on other sites More sharing options...
Rikk Posted October 28, 2016 Share #777 Posted October 28, 2016 Thank to all passionate who participates in this performance ! ... 2) With this version of ramdisk (DS3615xs), is it possible to use "Virtual DSM" feature ? .. Rikk You need btfrs for Virtual DSM... I suppose you're using ext4 because you have migrated your volume from DSM 5.2, so you have to backup, format and restore data back. Ciao ema Thank you for this clarification. Rikk Quote Link to comment Share on other sites More sharing options...
Rikk Posted October 28, 2016 Share #778 Posted October 28, 2016 Thank to all passionate who participates in this performance ! ... 2) With this version of ramdisk (DS3615xs), is it possible to use "Virtual DSM" feature ? .. Rikk You need btfrs for Virtual DSM... I suppose you're using ext4 because you have migrated your volume from DSM 5.2, so you have to backup, format and restore data back. Ciao ema Thank you for this clarification. Rikk Quote Link to comment Share on other sites More sharing options...
Arcao Posted October 28, 2016 Share #779 Posted October 28, 2016 I am using GA-H170N-WIFI, I manually extract the file to individual folder but doesn't seem the power button is working. My error. The S30acpid.sh has to be in /usr/local/etc/rc.d/ otherwise the acpid daemon is not started on boot. Just type this under root user: mv /usr/syno/etc/rc.sysv/S30acpid.sh /usr/local/etc/rc.d/S30acpid.sh Or download updated power-off.tar.gz. Then restart your nas or start acpid daemon with: /usr/local/etc/rc.d/S30acpid.sh start Quote Link to comment Share on other sites More sharing options...
lazygatto Posted October 28, 2016 Share #780 Posted October 28, 2016 Good day, everyone Could you please help me or show in which direction i should investigate? =) I has the following problem. Trying to install DSM 6.0.2-8451 into Proxmox VM. I got jun-baremetal-uefi-arcao-v2.img, convert it into qcow2 disk. (Thanks to Arcao ) Connect it into VM, setted as UEFI boot. Xpenology booted Ok. But when I try to install DSM_DS3615xs_8451.pat I always totting error 13 - "Failed to install the file. The file is probably corrupted. (13)". Here is my grub.cfg # cat ~/xpe/grub/grub.cfg serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='5' set fallback='0' insmod part_msdos insmod part_gpt set locale_dir=$prefix/locale set lang=en_US menuentry 'Synology DS3615xs' --class os { insmod fat set img=$prefix/../image/DS3615xs linux $img/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 rmmod=ata_piix console=ttyS0,115200n8 sn=B2LWN08140 mac1=001132FFB5A0 withefi elevator=your_magic_elevator quiet initrd $img/ramdisk.lzma } I read that error 13 related to wrong vid/pid, but I don't really know which of them I have to use. Because VM booting from IDE. Here is VM config file # cat /etc/pve/qemu-server/111.conf bios: ovmf bootdisk: ide0 cores: 1 efidisk0: local:111/vm-111-disk-3.qcow2,size=128K ide0: local:111/vm-111-xp-uefi.qcow2 memory: 512 net0: e1000=00:11:32:FF:B5:A0,bridge=vmbr0 numa: 0 ostype: l26 sata0: local:111/vm-111-disk-2.qcow2,size=320G scsihw: virtio-scsi-pci smbios1: uuid=9d85a89b-043d-4bf8-9c9d-9955c1add4e0 sockets: 1 Would be very appreciated for any help Quote Link to comment Share on other sites More sharing options...
Hitcher99 Posted October 28, 2016 Share #781 Posted October 28, 2016 Hi guys, any news about hyper-v support? Quote Link to comment Share on other sites More sharing options...
quicknick Posted October 29, 2016 Share #782 Posted October 29, 2016 Good day, everyone Could you please help me or show in which direction i should investigate? =) I has the following problem. Trying to install DSM 6.0.2-8451 into Proxmox VM. I got jun-baremetal-uefi-arcao-v2.img, convert it into qcow2 disk. (Thanks to Arcao ) Connect it into VM, setted as UEFI boot. Xpenology booted Ok. But when I try to install DSM_DS3615xs_8451.pat I always totting error 13 - "Failed to install the file. The file is probably corrupted. (13)". Here is my grub.cfg # cat ~/xpe/grub/grub.cfg serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='5' set fallback='0' insmod part_msdos insmod part_gpt set locale_dir=$prefix/locale set lang=en_US menuentry 'Synology DS3615xs' --class os { insmod fat set img=$prefix/../image/DS3615xs linux $img/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 syno_hw_version=DS3615xs vender_format_version=2 vid=0x0EA0 pid=0x2168 loglevel=0 vga=0x305 rmmod=ata_piix console=ttyS0,115200n8 sn=B2LWN08140 mac1=001132FFB5A0 withefi elevator=your_magic_elevator quiet initrd $img/ramdisk.lzma } I read that error 13 related to wrong vid/pid, but I don't really know which of them I have to use. Because VM booting from IDE. Here is VM config file # cat /etc/pve/qemu-server/111.conf bios: ovmf bootdisk: ide0 cores: 1 efidisk0: local:111/vm-111-disk-3.qcow2,size=128K ide0: local:111/vm-111-xp-uefi.qcow2 memory: 512 net0: e1000=00:11:32:FF:B5:A0,bridge=vmbr0 numa: 0 ostype: l26 sata0: local:111/vm-111-disk-2.qcow2,size=320G scsihw: virtio-scsi-pci smbios1: uuid=9d85a89b-043d-4bf8-9c9d-9955c1add4e0 sockets: 1 Would be very appreciated for any help You want to use the bios/uefi.img and add new disk in kvm as usb drive. Then set your vid/pid to your usb. To find your usb info run the following: cat /proc/bus/usb/devices To make it easier cat /proc/bus/usb/devices |grep -e "^$" -e "Vendor" -e "Manufacturer" -e "Product" -e "usb-storage" | grep -vE 'hci|HCI|3.10' Sent from my SM-N920T using Tapatalk Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 29, 2016 Share #783 Posted October 29, 2016 (edited) I've created a tutorial for baremetal migration from dsm 5.2 to dsm 6.0 in English so this thread can re-focus on development matters. Hope it helps. viewtopic.php?f=2&t=22100 Change mac1=0011322CA785 to mac1=[your mac address] You can also add mac2=[our mac2 address] if you have a 2nd NIC. i have try to add mac2=MYMAC and doesn't work It works only with one lan card, not both of them. any ideas ? Not knowing what your hardware is, it is difficult to help. MB manufacturers don't always use the same NICs on the motherboard. My MB for example has 2 NICs, one being from Intel on LAN1 and the other one from Atheros on LAN2. Edited October 29, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 29, 2016 Share #784 Posted October 29, 2016 (edited) I have a GA-H170N-WIFI but only 1 LAN is working. Intel I219V chip and the other one controlled by an Intel I211AT chip. in DSM network shown I have 2 LAN. but actually 1 is not working. Anything I can troubleshoot here? I have a GA-H170N-WIFI but only 1 LAN is working. Intel I219V chip and the other one controlled by an Intel I211AT chip. in DSM network shown I have 2 LAN. but actually 1 is not working. Anything I can troubleshoot here? Same here ! Only one works. If i use the mac of the realtek lan, the realtek works. If i use the mac of the intel lan, the intel work. They work only as one, not both of them work. I have to set mac1=MAC, when i set mac2=MAC (this isn't working). Not really sure what the problem is but I though that both NICs on that MB were intel chips. Have you tried a bios reset? Make sure you haven't set your router with fixed IPs with different mac addressed that you are using in the grub or it my might create some conflict. Just guessing so don't quote me on this! Edited October 29, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
Polanskiman Posted October 29, 2016 Share #785 Posted October 29, 2016 (edited) Supporting AMD CPUs require complete kernel recompilation. Kernel sources for DSM 6.0.2-8451 Update 2 is not available, only DSM 6 beta 7274. Thanks , that's what I suspected. Jun has patched the kernel with AMD support. This is for the brave people >>> viewtopic.php?f=2&t=20216#p72624 Edited October 29, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
kahooli Posted October 29, 2016 Share #786 Posted October 29, 2016 Supporting AMD CPUs require complete kernel recompilation. Kernel sources for DSM 6.0.2-8451 Update 2 is not available, only DSM 6 beta 7274. Thanks , that's what I suspected. Jun has recompiled with AMD support. This is for the brave people >>> viewtopic.php?f=2&t=20216#p72624 Ooooh! I'll try it Quote Link to comment Share on other sites More sharing options...
livearyan Posted October 29, 2016 Share #787 Posted October 29, 2016 I've created a tutorial for baremetal migration from dsm 5.2 to dsm 6.0 in English so this thread can re-focus on development matters. Hope it helps. viewtopic.php?f=2&t=22100 Change mac1=0011322CA785 to mac1=[your mac address] You can also add mac2=[our mac2 address] if you have a 2nd NIC. i have try to add mac2=MYMAC and doesn't work It works only with one lan card, not both of them. any ideas ? Not knowing what your hardware is, it is difficult to help. MB manufacturers don't always use the same NICs on the motherboard. My MB for example has 2 NICS, one being and Intel chip on LAN1 and the other an Atheros chip on LAN2. I have the gigabye h97 wifi rev1.1 Motherboard http://www.gigabyte.com/products/produc ... id=5253#sp with: Intel® GbE LAN chip (10/100/1000 Mbit)(LAN1) Realtek® GbE LAN chip (10/100/1000 Mbit)(LAN2) Polanskiman, can you post your grub.cfg configuration please ? Quote Link to comment Share on other sites More sharing options...
xtiang7c0 Posted October 29, 2016 Share #788 Posted October 29, 2016 (edited) Tadaaaaaaaaa. Working on a AMD E350 board (http://www.asrock.com/mb/amd/e350m1/), even with migrating the one HDD I used with it. Only changed the PID and VID from the USB stick that I used in the grub.cfg. I have transfer rates of 10 MB/s, even though the drive does 85 MB/s and the board has an Gbit LAN port. DSM shows the Gbit LAN port as well. I will reset the harddrive and see if there is a change. Great work, jun! edit: memo to myself: turn on the second Gbit switch, so you don´t have the wifi speed in your network from your laptop in the docking station. speeds (read/write): no encrypted folder 105MB/105MB encrypted folder 40MB/37MB So I think it would have worked with the migrated system as well. The harddrive seems to be faster as I thought. Update to 6.0.2-8451 Update 2 worked as well. Thanks again! Edited October 29, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
kahooli Posted October 29, 2016 Share #789 Posted October 29, 2016 (edited) Jun has recompiled with AMD support. This is for the brave people >>> viewtopic.php?f=2&t=20216#p72624 Ooooh! I'll try it What I've done on my HP N40L Gen7 Microserver...From Arcao's Mega folder linked from THIS POST, I used the dsm6.0.2-8451.2/v2/jun-baremetal-hybrid-uefibios-arcao-v2.zip file to flash a USB flash drive with the Win32 Disk Imager tool deleted the file zImage located on the USB drive under USB:\image\DS3615xs copied bzImage from THIS POST (for AMD systems) to same folder (USB:\image\DS3615xs) & renamed to zImage Used Flash Drive Information Extractor to get USB flash drive's VID & PID Updated grub.cfg (updated sn, mac1, vid & pid, and added SataPortMap & mac2. Of course they aren't all x's )serial --port=0x3F8 --speed=115200 terminal_input serial console terminal_output serial console set default='0' set timeout='1' set fallback='0' menuentry 'Synology DS3615xs' --class os { insmod fat linux /image/DS3615xs/zImage root=/dev/md0 syno_hdd_powerup_seq=0 netif_num=1 HddHotplug=0 SataPortMap=4 syno_hw_version=DS3615xs vender_format_version=2 vid=0x05DC pid=0xA761 console=ttyS0,115200n8 sn=xxxxxxxxxx mac1=xxxxxxxxxxxx mac2=xxxxxxxxxxxx withefi elevator=your_magic_elevator quiet initrd /image/DS3615xs/ramdisk.lzma } Installed USB to internal USB port on System Board and booted server Migrated to latest DSM 6 (6.0.2-8451) Waited for database update to complete (see Notifications panel for confirmation when this is done) Updated to DSM 6.0.2-8451 Update 2 So far so good Thanks to both Arcao & jun! Edited October 29, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
ronin Posted October 29, 2016 Share #790 Posted October 29, 2016 Great job Arcao & jun!! Excellent. Got DSM 6 update 2 running on HP N54L AMD Turion II. Sooooo happy!. Migration went well, updated all packages flawlessly with one exception for my docker images. Everything running smoothly. Such a great job!! Much appreciated. Keep this community going guys! Quote Link to comment Share on other sites More sharing options...
ema Posted October 29, 2016 Share #791 Posted October 29, 2016 Wow! Great job! Thanks Arcao & Jun! Working like a charm on my n36l updated from DSM 5.2 Ciao ema Quote Link to comment Share on other sites More sharing options...
loeufdur Posted October 29, 2016 Share #792 Posted October 29, 2016 Hi everybody Does it work with raid areca card? Thanks Quote Link to comment Share on other sites More sharing options...
Arcao Posted October 29, 2016 Share #793 Posted October 29, 2016 (edited) Hi guys, Here is prepared image with included AMD zImage: https://mega.nz/#!WVlWRKiR!ZYATz-ZuaoSF14I_V7tTkd1m0tAK04xs1IwsfAG2Afc (Amd img Hybrid UEFI/BIOS) Image prepared with OSFMount. Edited October 29, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
lolo9419 Posted October 29, 2016 Share #794 Posted October 29, 2016 Hello everyone, First of all, thanks to everyone trying to make this new dsm work, excellent job! Now, i have a Dell PERC H200 flashed to a LSI 9211-8i, it was working perfectly on DSM 5.2 but on this one as long as the card is plugged, nothing boot, i get the "Booting Kernel" screen but never find the NAS on the network, without it, no problem, everything goes smoothly.I'm using the arcao V2 image. If anyone knows a easy fix, let me know Thanks Quote Link to comment Share on other sites More sharing options...
dynax Posted October 29, 2016 Share #795 Posted October 29, 2016 Hello everyone, First of all, thanks to everyone trying to make this new dsm work, excellent job! Now, i have a Dell PERC H200 flashed to a LSI 9211-8i, it was working perfectly on DSM 5.2 but on this one as long as the card is plugged, nothing boot, i get the "Booting Kernel" screen but never find the NAS on the network, without it, no problem, everything goes smoothly.I'm using the arcao V2 image. If anyone knows a easy fix, let me know Thanks I am very sure there won't be a fix for this one until the proper source code is released. Quote Link to comment Share on other sites More sharing options...
CtrlAltDel Posted October 29, 2016 Share #796 Posted October 29, 2016 Big thanks to Jun and Arcao for making it happen! Gen7 N40L success using Arcao's new img linked above. There goes my weekend. Quote Link to comment Share on other sites More sharing options...
tim427 Posted October 29, 2016 Share #797 Posted October 29, 2016 (edited) For all KVM users, i did the following; downloaded the latest 'jun img'-file mounted with read-write permissions edited the 'grub.cfg'-file with an valid MAC-SN (used the same from my DSM 5.5 installation) and the VID+PID (vid=0x46f4 pid=0x0001) changed my virtual MAC-address (same as 'grub.cfg' via "virsh edit vm_name") booted via text-console used the browser to start the installation used the official 'DSM_DS3615xs_8451.pat' file created btrfs without problems updated to '6.0.2-8451 Update 2' Good luck! Edited October 29, 2016 by Guest Quote Link to comment Share on other sites More sharing options...
donmimo Posted October 29, 2016 Share #798 Posted October 29, 2016 Are you able to use virtio network card in your kvm vm? Quote Link to comment Share on other sites More sharing options...
macleaned Posted October 29, 2016 Share #799 Posted October 29, 2016 Hello! I tried a new install DSM 6 in my HP Gen8. I used Arcao latest image V2. 1. Make bootable usb. 2. Edite grub.cfg with valid VID+PID and gen8 mac address, with original serial. 3. Boot 4. I found the nas with web assistant. 5. I tried install and i received the 13 error message. The Vid and PID is OK. Somebody has an idea what's the problem? Quote Link to comment Share on other sites More sharing options...
tim427 Posted October 29, 2016 Share #800 Posted October 29, 2016 I used e1000 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.