Vasilisk Posted June 13, 2016 Share #1 Posted June 13, 2016 I'm using DSM 5.0 DS214Play which contains only one network card. I bought one more and i see it by "dmesg" (drivers OK), but i see only one "LAN" in web interface. How i can add NIC manualy in DSM? Link to comment Share on other sites More sharing options...
AllGamer Posted June 13, 2016 Share #2 Posted June 13, 2016 yup, i found the same issue as well when I was playing with the DS214play version. you should be able to edit the synoconfig file to add another card in there. if your machine can run 64 bit you might be better off running the XPEnoboot 5.2 for DS3615xs, that by default supports 4 NIC Link to comment Share on other sites More sharing options...
Vasilisk Posted June 13, 2016 Author Share #3 Posted June 13, 2016 Ok. which string i must add or update in synoinfo.conf i see only eth0_wol_options="d" - Wake on lan parameter. Link to comment Share on other sites More sharing options...
AllGamer Posted June 13, 2016 Share #4 Posted June 13, 2016 i think the best thing to do is to compare side by side the synoinfo.conf of both DS214play vs. DS3615xs Even I don't know for sure, but that's what I'll be doing if I was trying to find out. Link to comment Share on other sites More sharing options...
Vasilisk Posted August 25, 2016 Author Share #5 Posted August 25, 2016 I found the answer by myself. add|change synoinfo.conf ===> MAXLAN = "3" add|change syslinux.cfg ===> netif_num=3 Link to comment Share on other sites More sharing options...
Recommended Posts