epicurean Posted January 18, 2017 Share #976 Posted January 18, 2017 Does anyone still have a link to infiniband drivers that work with xpenology 5.2, and how to get round to installing it? much thanks Link to comment Share on other sites More sharing options...
macrod Posted January 19, 2017 Share #977 Posted January 19, 2017 could someone compile this driver for me please? Lan1: Intel 82567V the assistant doesnt find a nas on the network after i created the boot image im trying to do a baremetal install following Tutorial: Install/Migrate DSM 5.2 to 6.0 (Jun's loader) Link to comment Share on other sites More sharing options...
Jason69 Posted January 28, 2017 Share #978 Posted January 28, 2017 Could you please add support for intel i211, Marvell 88SE9215 in DSM 6 loader? Yes, please add the support for the Intel i211 and Marvell 88SE9215. Thanks !! Link to comment Share on other sites More sharing options...
5u4573 Posted January 29, 2017 Share #979 Posted January 29, 2017 Hello, could you add the driver for a sas HP SMART ARRAY P400 controller with LSISAS1078 chip? Since the forum nawe18 partner in Spanish does not work that card with two SAS disks that it has. Enviado desde mi SM-G900M mediante Tapatalk Link to comment Share on other sites More sharing options...
komarto Posted January 29, 2017 Share #980 Posted January 29, 2017 Could you please add support for intel i211, Marvell 88SE9215 in DSM 6 loader? Yes, please add the support for the Intel i211 and Marvell 88SE9215. Thanks !! 88SE9215 is already supported I am using it on DSM 6. see my signature below. Link to comment Share on other sites More sharing options...
GizmoPower Posted February 2, 2017 Share #981 Posted February 2, 2017 Please include this: Intel® 82575EB Gigabit Ethernet Controller http://ark.intel.com/products/50281/Int ... Controller Link to comment Share on other sites More sharing options...
Sultantiran Posted February 2, 2017 Share #982 Posted February 2, 2017 Hi! Could you please add support for intel i211 in DSM 6 loader? https://downloadcenter.intel.com/produc ... 211-Series Link to comment Share on other sites More sharing options...
rockwilder Posted February 3, 2017 Share #983 Posted February 3, 2017 ¿Could you include pata_atiixp? I try to compile by myself but i have not been success. Thanks. Link to comment Share on other sites More sharing options...
snakefox666 Posted February 3, 2017 Share #984 Posted February 3, 2017 Hello All, could someone help me to integrate "Usb 1.1 ohci-hcd driver" on my N40L ? (jun's release). I was waiting for the new quicknick release that should integrate it but I was thinking to try it myself I'm pretty happy with the Jun's release, only missing my USB UPS due to this driver not integrated. Link to comment Share on other sites More sharing options...
billat29 Posted February 4, 2017 Share #985 Posted February 4, 2017 Hello All,could someone help me to integrate "Usb 1.1 ohci-hcd driver" on my N40L ? (jun's release). I was waiting for the new quicknick release that should integrate it but I was thinking to try it myself I'm pretty happy with the Jun's release, only missing my USB UPS due to this driver not integrated. I was waiting for the much discussed quicknik release hoping for the same driver to get my USB printer working on my N54L, and then I found a USB 2.0 hub in my box of computer bits. I plugged it in (unpowered) and it all worked. Link to comment Share on other sites More sharing options...
dial911 Posted February 13, 2017 Share #986 Posted February 13, 2017 Also please integrate Realtek RTL8111GRthanks in advance Another vote for Realtek RTL8111GR nic driver especially for new DSM6.0.2 loader. Thanks. +1 more for Realtek RTL8111GR driver being integrated so I can continue to use my ASRock N3150-ITX mobo. I assume 6.0.2 will NOT work on with my on board NIC after reading this: "Polanskiman wrote: * Note: r8169 from Trantor archive doesn't work with my on-board Realtek RTL8111GR. So I kept the existing which is also much bigger." viewtopic.php?f=2&t=22100&start=280&hilit=Realtek+RTL8111GR THANK YOU!! Link to comment Share on other sites More sharing options...
Trantor Posted February 18, 2017 Author Share #987 Posted February 18, 2017 Also please integrate Realtek RTL8111GRthanks in advance Another vote for Realtek RTL8111GR nic driver especially for new DSM6.0.2 loader. Thanks. +1 more for Realtek RTL8111GR driver being integrated so I can continue to use my ASRock N3150-ITX mobo. I assume 6.0.2 will NOT work on with my on board NIC after reading this: "Polanskiman wrote: * Note: r8169 from Trantor archive doesn't work with my on-board Realtek RTL8111GR. So I kept the existing which is also much bigger." viewtopic.php?f=2&t=22100&start=280&hilit=Realtek+RTL8111GR THANK YOU!! Does anyone with "problematic" Realtek RTL8111GR have tried latest XPEnoboot 5.2 release ? If some of you have working 5.2 release with 8111GR nic can you please give more details about it (lspci, loaded drivers..) Link to comment Share on other sites More sharing options...
bolise Posted February 19, 2017 Share #988 Posted February 19, 2017 I installed XPEnology in my laptop but XPEnology don't supported the Ethernet Driver. I want to support the Ethernet driver Ethernet Driver Spec is Agere Systems ET-131x PCI-E Gigabit Ethernet I Found the linux driver of ET-131x : https://drive.google.com/open?id=0B3JS2 ... HJseGNaNUk please add old Ethernet Driver thanks Link to comment Share on other sites More sharing options...
Taran2ul Posted February 25, 2017 Share #989 Posted February 25, 2017 Why is not allowed to request WiFi drivers? And may all the same who are either unable to find / gather drivers for Intel® Dual Band Wireless-AC 7265 wifi card (DSM 6.0.2, Intel NUC 5I5RYH) PS I'm new. Please be lenient. Link to comment Share on other sites More sharing options...
Leo K Posted February 26, 2017 Share #990 Posted February 26, 2017 (edited) Hello Any one can help me to compyle a firmware module to mygica t230 If you are on xpenology 5.2 you can try this https://mega.nz/#!tkVSGb5L!-8mwXbakXnlK ... U0xLyxJrJo but YMMV. I had the tuner working fine in 5.1 but in 5.2 I can't even scan channels properly, I get a lot of PAT timeout errors. Something changed between kernels that is giving me trouble, If I could I would downgrade to DSM 5.1 just for this. I don't need to say that I'm pretty interested in 6.0 in hope it would remedy issue with media driver. Btw. if you are on 5.1 try this https://mega.nz/#!htNwgZLK!oKFESUWZQ9af ... p5Ws25Gxac, this one has dvbv5tools included to switch tuner to DVB-C mode so you might need to change (comment out) few lines in script to disable it. For 5.2 I've made separate package for dvb5tools https://mega.nz/#!Es9DhJIC!qG8LWkcwL0xi ... CqJKrGo7XY and added w_scan too. First of all, hello everyone! this is my first post... Hi there seba, I'm wondering if you have managed to make it work with xpenology 5.2...?¿? I had MyGica t230 and used your package but without success... before downgrading to 5.1 I would like to know if you finally have it working. On the other hand I have also a WinTV dualHD model 1596, can anyone help me to make it work? I really don't have too much experience with linux systems. Thank you! Edited February 28, 2017 by Guest Link to comment Share on other sites More sharing options...
fb_luc Posted February 28, 2017 Share #991 Posted February 28, 2017 Dear, Could you add a drive for Dell PERC 6/I Integrated Adapter? DELL PERC Chip Related LSI RAID/HBA PERC5/i, PERC5/e, Intel IOP333 I/O Processor + PERC5/i Integrated Internal LSISAS1068 MegaRAID SAS 8408E/8480E PERC 6/I LSISAS1078 RAID on Chip (ROC) MegaRAID SAS 8888ELP SAS6/ir LSISAS1068E LSI SAS 1068E SAS5i & SAS5E LSISAS1068 LSI SAS 1068 PERC H200 LSISAS2008 LSI SAS 9211-8i PERC H700/800 LSISAS2108 RAID-on-Chip (ROC) MegaRAID SAS 9260-8i/MegaRAID SAS 9260DE-8i PERC H710P LSISAS2208(ROC) MegaRAID SAS 9265-8i thank you so much. I also need the DELL RAID driver for Jun's Loader. If somebody have this driver please tell me I need a driver for PERC H700 Controller Thanks Link to comment Share on other sites More sharing options...
G109 Posted March 2, 2017 Share #992 Posted March 2, 2017 Same request for a H200 and H200 flashed to LSI 9211-8i . Thanks for all your work guys Link to comment Share on other sites More sharing options...
epiceni Posted March 9, 2017 Share #993 Posted March 9, 2017 Driver CPU Xeon x3470 Please ? Link to comment Share on other sites More sharing options...
gn28 Posted March 11, 2017 Share #994 Posted March 11, 2017 Can anyone please help me identify which drivers are needed (SATA drivers most likely) so I can run Xpenology on my QNAP TVS-473 ? Thanks in advance! Link to comment Share on other sites More sharing options...
choux77165 Posted March 13, 2017 Share #995 Posted March 13, 2017 Request for driver for dell precision t3600 ISCI: Intel C600 Series Chipset controller SAS works very well with XPEnology-DSM-6.0.2-8451.5-quicknick-boot-v2.2.img Sorry for my English but I'm french Link to comment Share on other sites More sharing options...
ordimans Posted March 13, 2017 Share #996 Posted March 13, 2017 Hello All,could someone help me to integrate "Usb 1.1 ohci-hcd driver" on my N40L ? (jun's release). I was waiting for the new quicknick release that should integrate it but I was thinking to try it myself I'm pretty happy with the Jun's release, only missing my USB UPS due to this driver not integrated. Same here for UPS device. I am not sure if the same method work on DSM 6.0. It was used with DSM 4.2 : viewtopic.php?p=4292#p4292 What do you think ? I think to add myself driver because i need that Link to comment Share on other sites More sharing options...
HBEN Posted March 22, 2017 Share #997 Posted March 22, 2017 Realtek Audio Driver for me! Link to comment Share on other sites More sharing options...
dimkov74 Posted March 27, 2017 Share #998 Posted March 27, 2017 The HARDWARE SUPPORTED SHEET shows CCISS: Smart Array E200i But it does not work on 6.1, can I enable this driver. Link to comment Share on other sites More sharing options...
Polanskiman Posted March 28, 2017 Share #999 Posted March 28, 2017 The HARDWARE SUPPORTED SHEET shows CCISS: Smart Array E200iBut it does not work on 6.1, can I enable this driver. This drivers list is for DSM 5.2 not for 6.1. Link to comment Share on other sites More sharing options...
OoERASERoO Posted March 28, 2017 Share #1000 Posted March 28, 2017 (edited) I need SCSI ---- Intel C600 Series Chipset SAS plz version: DSM 6.1 or 5.2 is ok Edited April 1, 2017 by Guest Link to comment Share on other sites More sharing options...
Recommended Posts