Here2rock Posted March 28, 2015 Share #351 Posted March 28, 2015 30€ http://www.technikaffe.de/cpu_vergleich-intel_celeron_j1900-327-vs-intel_pentium_j2900-326 Very nice Gary, but seriously is there other difference. Also but kind of case are people using? is 4GB RAM enough? What is the best power supply to use with one of these with 4 hard drives? Link to comment Share on other sites More sharing options...
Here2rock Posted March 28, 2015 Share #352 Posted March 28, 2015 Very nice Gary, but seriously are there other differences. Also what kind of case are people using with one of these boards? is 4GB RAM enough? What is the best power supply to use with one of these with 4 hard drives? Link to comment Share on other sites More sharing options...
Roman Posted March 28, 2015 Share #353 Posted March 28, 2015 Hello I apologize in advance for my English. I have on the Asrock Q1900-ITX DC image XPEnoboot DS3615xs_5.1-5022.1. This image only supports DUAL CORE procesor ? Motherboard has QUARD-CORE. Synology sees only 2 core. Thank you answers Link to comment Share on other sites More sharing options...
pwvandeursen Posted March 29, 2015 Share #354 Posted March 29, 2015 Very nice Gary, but seriously are there other differences. Also what kind of case are people using with one of these boards? is 4GB RAM enough? What is the best power supply to use with one of these with 4 hard drives? I hav. 4gb op board. Running smooth incl full transcoding for plex. Power with 4 hdd is 90 watt laptop charcher Link to comment Share on other sites More sharing options...
pwvandeursen Posted March 29, 2015 Share #355 Posted March 29, 2015 Very nice Gary, but seriously are there other differences. Also what kind of case are people using with one of these boards? is 4GB RAM enough? What is the best power supply to use with one of these with 4 hard drives? I hav. 4gb op board. Running smooth incl full transcoding for plex. Power with 4 hdd is 90 watt laptop charcher Link to comment Share on other sites More sharing options...
Here2rock Posted March 29, 2015 Share #356 Posted March 29, 2015 90 watts laptop charcher???? Link to comment Share on other sites More sharing options...
pwvandeursen Posted March 29, 2015 Share #357 Posted March 29, 2015 90 watts laptop charcher???? eeeuuuh. yes. 19volt, 4.5 amp. just any normal dell or HP charger will suffice Link to comment Share on other sites More sharing options...
Schnapps Posted March 29, 2015 Share #358 Posted March 29, 2015 4HDDs and 1-2 wents will not consume more than 40W/hour. And I had it all measured. Link to comment Share on other sites More sharing options...
Schnapps Posted March 29, 2015 Share #359 Posted March 29, 2015 HelloI apologize in advance for my English. I have on the Asrock Q1900-ITX DC image XPEnoboot DS3615xs_5.1-5022.1. This image only supports DUAL CORE procesor ? Motherboard has QUARD-CORE. Synology sees only 2 core. Thank you answers The processor (Intel i3) is hardcoded in the DSM. If you use a hypervisor and add to the DSM VM only 1 core, DSM will still show you it sees i3 dual-core Cheer-up. It's working fine. Link to comment Share on other sites More sharing options...
Schnapps Posted March 29, 2015 Share #360 Posted March 29, 2015 30€ http://www.technikaffe.de/cpu_vergleich-intel_celeron_j1900-327-vs-intel_pentium_j2900-326 Very nice Gary, but seriously is there other difference. Also but kind of case are people using? is 4GB RAM enough? What is the best power supply to use with one of these with 4 hard drives? 2GB is more than enough! I have 1GB allocated to my DSM VM and look at the stats: Link to comment Share on other sites More sharing options...
Schnapps Posted March 29, 2015 Share #361 Posted March 29, 2015 Uh, you mean shr1 not raid5, right? no i do mean raid 5. I have 4 identical drives. Never digged in to what was better raid or shr... Sent from my iPhone using Tapatalk SHR is Synology's custom RAID. SHR-1 is equal to RAID5. SHR has the ability to use different size disks and expand to later added disks Link to comment Share on other sites More sharing options...
robermix Posted March 29, 2015 Share #362 Posted March 29, 2015 Why i should use the VM and not the hardware solution ? Can Hyper-V be used on windows 8.1 ? Link to comment Share on other sites More sharing options...
LeaderGL Posted April 1, 2015 Share #363 Posted April 1, 2015 I installed the 64 bit versions (ds3615xs); XPEnoboot_DS3615xs_5.1-5022.3 and all works fine except for USB ports...i don't see any flash storage attached... do you have some suggestions? Link to comment Share on other sites More sharing options...
robermix Posted April 1, 2015 Share #364 Posted April 1, 2015 I installed the 64 bit versions (ds3615xs); XPEnoboot_DS3615xs_5.1-5022.3 and all works fine except for USB ports...i don't see any flash storage attached... do you have some suggestions? Try this: viewtopic.php?p=25069#p25069 Link to comment Share on other sites More sharing options...
LeaderGL Posted April 3, 2015 Share #365 Posted April 3, 2015 thank you, it work right Link to comment Share on other sites More sharing options...
Schnapps Posted April 4, 2015 Share #366 Posted April 4, 2015 Why i should use the VM and not the hardware solution ? Can Hyper-V be used on windows 8.1 ? -Why? You can run multiple VMs at once, on a low-powered machine. -Yes Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
freddyemmer Posted April 7, 2015 Share #367 Posted April 7, 2015 does anyone of you run baremetal with Intel speedstep enabled? The moment I Enable speedstep the NAS gets unresponsive when throwing large portions of data towards it. Link to comment Share on other sites More sharing options...
Jurai Posted April 7, 2015 Share #368 Posted April 7, 2015 Forgive me if already answered, just started looking into using Xpenology to upgrade to a higher capacity level than my current 2 disk synology nas, the Q1900/Q1900DC seem very enticing due to their low power consumption, however I'm ultimately hoping to go to a 6 disk configuration to maximize available space while retaining redundancy as well. Is there a pci-e add-in card that will facilitate allowing Xpenology to utilize 6 disks in a RAID configuration w/o conflict, or will you pretty much be limited to 4 disks using this board considering that the mobo also has only limited sata power outs (DC ver)? Thanks for any advice Link to comment Share on other sites More sharing options...
rolandb5 Posted April 10, 2015 Share #369 Posted April 10, 2015 Forgive me if already answered, just started looking into using Xpenology to upgrade to a higher capacity level than my current 2 disk synology nas, the Q1900/Q1900DC seem very enticing due to their low power consumption, however I'm ultimately hoping to go to a 6 disk configuration to maximize available space while retaining redundancy as well. Is there a pci-e add-in card that will facilitate allowing Xpenology to utilize 6 disks in a RAID configuration w/o conflict, or will you pretty much be limited to 4 disks using this board considering that the mobo also has only limited sata power outs (DC ver)? Thanks for any advice I got exactly the same question; Planning to build a Xpenology machine, based on all your good recommendations here. - Can the Q1900itx-DC also work with 2 extra HDDs with a mini PCI-e expansion card? Does that also work power wise from connection perspective? -Can the DC version power the board and 6 HDDs from Watt point of view? - I'm very much interested in the Coolermaster 120. It can deal with 3 3,5inch Hdds and has an 5,5 inch expension bay. Could I buy brackets to place 2 other 3,5 inch HDDs in the PSU gap (since that will not be used by a PSU, due to DC version and external supply)? Link to comment Share on other sites More sharing options...
rolandb5 Posted April 10, 2015 Share #370 Posted April 10, 2015 Forgive me if already answered, just started looking into using Xpenology to upgrade to a higher capacity level than my current 2 disk synology nas, the Q1900/Q1900DC seem very enticing due to their low power consumption, however I'm ultimately hoping to go to a 6 disk configuration to maximize available space while retaining redundancy as well. Is there a pci-e add-in card that will facilitate allowing Xpenology to utilize 6 disks in a RAID configuration w/o conflict, or will you pretty much be limited to 4 disks using this board considering that the mobo also has only limited sata power outs (DC ver)? Thanks for any advice I got exactly the same question; Planning to build a Xpenology machine, based on all your good recommendations here. - Can the Q1900itx-DC also work with 2 extra HDDs with a mini PCI-e expansion card? Does that also work power wise from connection perspective? -Can the DC version power the board and 6 HDDs from Watt point of view? - I'm very much interested in the Coolermaster 120. It can deal with 3 3,5inch Hdds and has an 5,5 inch expension bay. Could I buy brackets to place 2 other 3,5 inch HDDs in the PSU gap (since that will not be used by a PSU, due to DC version and external supply)? Link to comment Share on other sites More sharing options...
robermix Posted April 11, 2015 Share #371 Posted April 11, 2015 I have an issue. Bios 1.40. Serial and Parallel ports disabled. Intel USB 3.0 and Legacy Support Enable. XPEnoboot on bare metal, DSM 5.1-5022 Update 4. Pen Drive connected to an USB 2.0 port: it works. Hard Disk USB 2TB 3.5" with external power supply, connected to an USB 2.0 port: it works. Pen Drive connected to an USB 3.0 port: it works. Hard Disk USB 2TB 3.5" with external power supply, connected to an USB 3.0 port: it dosn't work. Link to comment Share on other sites More sharing options...
MaZeeT Posted April 12, 2015 Share #372 Posted April 12, 2015 I salvaged a 4-lane PCI-E raid-card at my work, which I have tryed in my bare-metal setup with the Q1900-ITX motherboard... I where able to use all 4 sata ports on the motherboard AND the 4 sata ports on the raid card for a total of 8 working sata ports... I only had to mod the 1-lane PCI-E slot, by opening the end with a drill.. pics of the motherboard with the installed raidcard : https://dl.dropboxusercontent.com/u/151 ... d4sata.jpg pics of the modded PCI-E slot : https://dl.dropboxusercontent.com/u/151 ... aneMod.jpg Link to comment Share on other sites More sharing options...
GrayDeath Posted April 13, 2015 Share #373 Posted April 13, 2015 I salvaged a 4-lane PCI-E raid-card at my work, which I have tryed in my bare-metal setup with the Q1900-ITX motherboard...I where able to use all 4 sata ports on the motherboard AND the 4 sata ports on the raid card for a total of 8 working sata ports... I only had to mod the 1-lane PCI-E slot, by opening the end with a drill.. pics of the motherboard with the installed raidcard : https://dl.dropboxusercontent.com/u/151 ... d4sata.jpg pics of the modded PCI-E slot : https://dl.dropboxusercontent.com/u/151 ... aneMod.jpg Very nice !!! Thanks for your experience! im unsing this card http://www.amazon.co.uk/Syba-SATA-Controller-Profile-Brackets/dp/B00AZ9T3OU Link to comment Share on other sites More sharing options...
clutchcable Posted April 13, 2015 Share #374 Posted April 13, 2015 Hi guys, Yesterday I got a new asrock q1900 itx it's got 2gb ram and a 500gb hard drive installed. Installed dsm 5.1 update 4 all went well. Left it on overnight to see if it's stable and upon login in I say lots of improper shutdowns in the notifications window. it seems it happens every 24 mins give or take, I checked hi inaction and that is set at 20 mins. I just stayed on the looking around and it remained on, I set hi inaction to 10 mins logged out logged in 15 mins later and it had reported improper shutdown. Any pointers, One other thing I noticed was the bios clock is a hour behind and won't accept the correct time upon reboots. Link to comment Share on other sites More sharing options...
argate7 Posted April 13, 2015 Share #375 Posted April 13, 2015 Hi, Is there any possibility to create a custom sh or any available package to control the fan speed?? I've got spectre pro pwm but I cannot use them in my mobo. So I would like to create a custom sh to control fans. Is there any way to do that?? Link to comment Share on other sites More sharing options...
Recommended Posts