Jump to content
XPEnology Community

nighthawk

Member
  • Posts

    39
  • Joined

  • Last visited

nighthawk's Achievements

Junior Member

Junior Member (2/7)

0

Reputation

  1. nighthawk

    4.3

    Чистят тут спам периодически, но нужно надежное решение.
  2. Это почти оригинальный DSM с дровами для установки в ВМ и пары сетевых карт+возможность брать оригинальный pat файл. Когда собирал - рассчитывал только на работу в qemu
  3. Если с тулчейном под 4.2 у вас тот-же результат, то можно посмотреть сюда: sourceforge.net/projects/dsgpl/files/toolkit/ Или посмотреть нужные хедеры в архивах исходников.
  4. Судя по вашим данным, у вас тулчейн для версии 4.1. Тулчейны под 4.2 можно взять тут: sourceforge.net/projects/dsgpl/files/DSM%204.2%20Tool%20Chains/
  5. I have successfully launched xpenology under libvirt + qemu. Installation images and an example config for libvirt is here: https://drive.google.com/folderview?id=0B5tpWhEINjUOR0t6X2V4UjNkcXc&usp=sharing My configuration: hp microserver n40l Debian jessie libvir 0.9.12 QEMU 1.1.2 These images contain the following changes: kernel modules: e1000.ko, r8168.ko, virtio_balloon.ko, virtio_blk.ko, virtio.ko, virtio_net.ko, virtio_pci.ko, virtio_ring.ko note for virtio_blk.ko - this module does not works as expected, autoloading disabled. For revision 3211 you may use original pat file from synology.
  6. Нужно настроить это в bios. А ещё лучше - заиметь ИБП.
  7. Например тут: ukdl.synology.com/download/ds/DSAssistant/Assistant_win.php Или тут: ukdl.synology.com/download/ds/DSAssistant/Assistant_linux.php
  8. Чипы silicon image показывают хорошую производительность при междисковом обмене, хотя на debian я такого не наблюдал. У меня заводится без пересборки ядра, но с модулями на сетевой адаптер и sata контроллер на такой конфигуряции: мамка - gigabyte ga-gc-230d память - 2 гб ddr2 crucial контроллер - sil3114c
  9. Hello again! all new kernels from me is here: https://drive.google.com/folderview?id= ... aring#list today's update for those who have broken pptp server https://docs.google.com/file/d/0B5tpWhE ... sp=sharing - modules https://docs.google.com/file/d/0B5tpWhE ... sp=sharing - usb flash image
  10. First you need to find on page 9 of this topic, my post with a link to the image of the usb drive and a link to the post with the image of DSM (.pat file) Then you need to write the image to a USB flash drive using dd. Next you need to modify the file named vender on a flash drive to set the mac-address of your server. Then boot from usb, install DSM as usual. Additionally you may write modules from https://docs.google.com/file/d/0B5tpWhE ... sp=sharing to your DSM (/lib/modules) No, I did not build this module, as I do not have a controller for testing. You may build new kernel by yourself from my github repo, just enable CONFIG_MEGARAID_SAS in kernel config for your controller. Of course, if you know this procedure. You may try to build qemu.
  11. On my n40l (with patched bios) i have all 5 internal drives. 5'th hdd contains DSM with "trash" partition, other 4 drives contains all usefull files.
  12. https://docs.google.com/file/d/0B5tpWhE ... sp=sharing Now usb devices are displayed as esata
  13. Your flash drive seem to be overwritten during installation, so you need to write synoboot image to your flash drive again.
  14. Hello again! https://docs.google.com/file/d/0B5tpWhE ... sp=sharing - synoboot image, that curently running on my hardware .pat files can be taken from here: viewtopic.php?f=2&t=555 There is same bugs with usb-hid, like in previous build (dsm 4.1), so usb ups support stil broken .
  15. patched sources: https://github.com/nighthawk149/xpenology-4.2-kernel
×
×
  • Create New...