Hello.
I've changed netif_num=1 in menu_nano.lst file.
I've tryed two times with and without mac1 parameter.
Nothings happen. WOL status N/D at last.
I have edited both
/etc.defaults/synoinfo.conf and /etc/synoinfo.conf
files, with these settings :
eth0_wol_options="g"
wol_enabled_options=""
MAC address the system is recognising with ssh command dmesg | grep "eth" is the same I've setted
DiskStation> dmesg | grep "eth"
[ 3.449861] b44: Unknown symbol phy_ethtool_sset (err 0)
[ 3.449993] b44: Unknown symbol phy_ethtool_gset (err 0)
[ 3.482366] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc9000007e000, f0:50:59:2f:d4:1c, XID 0c000880 IRQ 74
[ 3.482370] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 11.855726] usbcore: registered new interface driver ethub
[ 13.186736] r8169 0000:02:00.0: eth0: link down
[ 13.186770] r8169 0000:02:00.0: eth0: link down
[ 13.187411] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.768504] r8169 0000:02:00.0: eth0: link up
[ 14.769184] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 25.650069] [b]eth0: no IPv6 routers present[/b]
1) Last row is an error?!?
2) Sorry but I don't understand "Be aware that wake on lan doesn't like to transverse wireless networks.( if your trying to wake the box from a phone etc)"
Thanks