Hello Peter!
Updated to 69057, but the power button not working anymore (was working with 64570).
The loader building process showing this, but still not working :(. Can you check it please?
Thank you in advice!
Someone managed to get acpid extension working with ds3622xsp-7.2.0-64570 ?
https://raw.githubusercontent.com/pocopico/rp-ext/master/redpill-acpid/rpext-index.json
And what i need to use for that to get it working? Or with SasIdxMap=0 should the HDD's appear at the correct position?
LSI 9211-8i in IT mode + onboard controller disabled.
Thanks and sorry if i post in the wrong section :).
ML10 v2 E3-1270 v3 + Mellanox ConnectX + LSI 9211-8i IT mode (Perc H200), bare metal. All working fine. Clean install - Ok. Upgrade from 6.1 to 6.2 - Ok. Sent from my ONEPLUS 6 using Tapatalk
Try this then: sudo -i, admin password, and then "vi /etc.defaults/synoinfo.conf, then type your administrator password. Press i, make your modifications, then esc. After that type :w! then :q!."
Connect with SSH into your box, and type sudo vi /etc.defaults/synoinfo.conf, then type your administrator password. Press i, make your modifications, then esc. After that type :w! then :q!.
Nothing fancy. Did the stick. Modified the PID/VID, mac, serial and did the migration. All setting and files remains. QC is working also. Gen8 microserver.
Sent from my Oppo R5s
Confirmed that HP ML10 v2 is working baremetal. Img from page 10, updated with img from the first post, edited with the proper VID/PID and making changes for no improper shutdown message.
Sent from my Oppo R5s