Jump to content
XPEnology Community

martva

Member
  • Posts

    55
  • Joined

  • Last visited

  • Days Won

    1

martva last won the day on August 8 2017

martva had the most liked content!

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

martva's Achievements

Regular Member

Regular Member (3/7)

2

Reputation

  1. martva

    DSM 6.2 Loader

    Thank you very much! This is what I see in dmesg: Where eth0 is the PRO/1000 card. And eth1 is my onboard. [874639.684089] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [874639.925890] tg3 0000:03:00.0 eth1: Link is up at 1000 Mbps, full duplex [874639.925890] tg3 0000:03:00.0 eth1: Flow control is off for TX and off for RX So in theory I should be able to upgrade, with the exception of loosing the onboard card.
  2. martva

    DSM 6.2 Loader

    I'm trying to wrap my head around this loader. I'm using the following setup: - DSM version prior update: DSM 6.1.7-15284 UPDATE2 - Loader version and model: JUN'S LOADER v1.03b - DS3615xs - Using custom extra.lzma: NO - Installation type: BAREMETAL - HP Microserver N54L - Additional comments: I have an extra nic installed: Intel Pro 1000 PT PCI Express Gigabit NIC Now according to the start post, it says the system will panic when running DSM 6.2.1+ is not having a e1000e NIC. I've also read that this ONLY APPLIES to an ESXi setup. So I can savely assume that the when upgrading the newer 6.2 DSM I will not run into any problems with the intel pro nic? And is this still valid: Builtin card will work with 1.03b loader and DSM 6.2. It WILL NOT work with DSM 6.2.1 and 6.2.2 Is it also possible to do a cross-upgrade from ds3615xs to ds918+? Or is a clean install adviced here. Thank you in advance.
  3. Difference between my setup is I use the sataport=4 options. The rest is the same. Been running stable since the update came out.
  4. Did you get it working? I'm really curious!
  5. Been running stable from last Thursday. Services I'm running: VPN (openvpn), Hyperbackup, webserver. mariadb
  6. Updated to 6.1.3U4 witout problems. Reboot is required.
  7. No. I used a MAC address from a vaild synology system and generated a new mac/sn pair: google if you want know how this is done. I just edited the grub.conf to hold the new information. So no flashing the networkcard on my side. Since my nas is always on, I've never used WOL. Hope it will for you.
  8. So here's what I'm going to do: Preparing - Create usb bootloader, using the standard Jun 1.0.2b synoboot.img. (DONE) - Edit vid, pid to fit my usbdrive (DONE) - Edit mac, serial (taken from current bootloader, which I generated from a real mac adres of synology) (DONE) - Edit sataportmap to sataportmap=4 (DONE) - Download DSM version DSM DS3615xs_15152.pat ( ± 222MB in Size ) (DONE) Booting: - Turn off N54L - Remove Current usbdrive - Place new usbdrive - Boot into Bios - Turn OFF C1E into BIOS - Boot from usb drive with default grub option - find.synology.com - Choose Migrate during installation - Choose DSM version Pat file listed above. - Coffee and wait - And enjoy the freshly installed new version of DSM. Pleaz correct me if I'm wrong
  9. And didi also use the force install option I read in the threads? As well as booting with the system with the first option (so not selecting the AMD boot Option)?
  10. martva

    DSM 6.1.x Loader

    Due to different reports on succesfull updates to UPdate 7 I wanted to share my experience. - N54L /4GB/ 4* 3TB disks (in SHR raid 5) - Jun 1.01 loader - Started from Version: 6.0.2-8451 Update 6 - Used the standard GUI option to update to Update 7 - Using SHR in my setup Update went succesfull.
  11. I have a N54L as well, with four HDD's. My update went flawlessly. I did however (just to be save) appended the SATAportmap option in the config file.
  12. martva

    DSM 6.1.x Loader

    -=SUCCES: BAREMETAL N54L/4HDD/4G=- Followed the instructions here: http://xpenology.com/forum/viewtopic.php?f=2&t=22100 Changes: Changed the vid= using my own USB VID Changed the pid= using my own USB PID Changed the sn= using my own generated SN Changed the mac1= using my own generated MAC address Changed set timeout='1' to set timeout='10' Changed set default='0' to set default='3' For default AMD bootoption appended SataPortMap=4 After boot I went to find.synology.com Updated from 5.2.5592 to 6.0.2.8451 After reboot I lost my static ip settings. I needed to set this manual again. I updated to Update 5 without any problems. I also saw Synology finally released Source code for branche 8451. https://sourceforge.net/projects/dsgpl/files/Synology%20NAS%20GPL%20Source/8451branch/bromolow-source/
  13. Are you connecting with HTTPS? It seems that the chromecast refuses unsigned certificates by default.
  14. martva

    DSM 6.1.x Loader

    Did you perform an upgrade of DSM5.2 or did you do a clean install?
×
×
  • Create New...