She

hello i run XPEnoboot 5.2-5565.2 on a HP microserver N54L with 3 drives. First problem is that i can't found xpenology with Synology Assistance. Then every time i start up xpenology, it looses the settings for Windows File Service & Mac File Service and i re-enable them every time.. i get the "-" which means "error", instead of the checked mark. I'm thinking to update the xpenoboot with the following steps which is found here http://xpenology.com/forum/viewtopic.php?p=42163#p42163 (thanks goes to andywhit) i also found that i get a FAILED when xpenoboot boots.. and also the following Partition layout is NOT Diskstation style. NOT EXECUTE /sbin/e2fsck should i try to update xpenoboot and DSM or its to risky to loose all my data? unfortunately i don't have all the space required to make a full back up, only partial. thanks

thanks again! from what i understand.. first i need to update the XPEnology boot and then the DSM.. cheers

thanks! but i already have DSM 5.2-5565 Update 2... or the above steps for the update 2, goes to update the XPEnoboot? right now i boot from XPEnoboot 5.2-5565.2-d6e5157.

hello i have an HP n54l with XPEnoboot 5.2-5565.2 with DSM 5.2-5565 Update 2.. every time i boot, it gets me to the DSM UPDATE screen because there is the new update (5.2-5592 Update 3 and now 5.2-5592 Update 4) although i have disable the task manager to search for updates.. which is the right way to update from DSM 5.2-5565 Update 2 to 5.2-5592 Update 4? through Control panel > Update & restore > DSM update? Manual DSM update? Update now button? some other method? also every time i boot the server, the Windows File Service & Mac File Service are disabled and i every time i need to go to Control Panel > Info Center > Services to re unable them.. is this a well known bug?

yes i know that. so if i shut down my n54l and unplug the usb stick, plug it to my pc and copy/paste all the contents to another usb stick would i have a back up of the original bootloader usb stick? thanks

so we can make another boot usb anytime with any version of nanoboot? or we need the exact same version, that we had, when we first installed xpenology? thanks

hello! i run xpenology on my HP n54l. i would like to know what will happen if the boot usb stick dies... how we create an exact copy of the boot usb stick? am i worrying too much thanks

The new seagate 8TB drives (archive series) is it supported with the new 5.1 XPEnology; They aren't in the compatibility list of hard drives on the synology site. what about hp microserver n54L with these SEAGATE 8tb drives and XPEnology? Will it work? Thanks

Thanks! Intel based motherboards (the asus Maximus costs as one hp n54l) are expensive and if I go these route, I prefer to buy a 4bay synology from the j series, or a hp n54l, cause I don't need the extra power.. I would like to built something that doesn't cost more than an hp microserver n54l..

Thanks!!! Do you know that will work with XPEnology? What about usb3 and wake on LAN? Does it have an embedded graphic card or I must buy a CPU with embedded gpu? Sorry for the lame questions.

micriserver motherboards rocks, for a big nas, but I have a small case (node 304) and I search for something with 6-8 Sata below 80€/90$.

i didn't find any of the above motherboards available. the fractal design node 304 http://www.fractal-design.com/home/prod ... -304-black supports mini-ITX (170 x 170 mm) and the bigger mini-DTX (203 x 170 mm or 8 x 6,7 inches) could you please recommend me some motherboards that supports: 1) xpenology usb3 and wake on Lan (optional) 2) with 6 or more SATA and 1 eSATA (optional) 3) mini-ITX or mini-DTX (203 x 170 mm or 8 x 6,7 inches) 4) doesn't cost a fortune.. supports cheap cpu and not an i3, i5 etc thanks

i have a fractal design node 304 http://www.fractal-design.com/home/product/cases/node-series/node-304-black that supports mini-ITX (170 x 170 mm) and the bigger mini-DTX (203 x 170 mm or 8 x 6,7 inches) could you please recommend me some motherboards that supports 1) xpenology usb3 and wake on Lan (optional) 2) with 6 or more SATA and 1 eSATA (optional) 3) mini-ITX or mini-DTX (203 x 170 mm or 8 x 6,7 inches) 4) doesn't cost a fortune.. supports cheap cpu and not an i3, i5 etc thanks

thanks for the answer

Yes, is possible. I got a HP Gen 8 microserver upgraded with a XEON processor and 16 Gb ram ... And have a hyper V environment with DSM 5.0 running. Is it possible to have six drives on a Gen8 case like n54l on the ODD space? does have 6 Sata connection?