Jump to content
XPEnology Community

cabldevil

Member
  • Posts

    20
  • Joined

  • Last visited

cabldevil's Achievements

Junior Member

Junior Member (2/7)

0

Reputation

  1. I Was able to get it working just fine also. The issue is what Peter said.
  2. if something changes, please reply to this post I have to go unraid until this issue has a development...............Sad......... CD
  3. Interesting. SO 918+ w/model and serial passing to DSM 7.1?
  4. @phone guy Thank you.. I know we talked on this topic before .... Its a shame because the LSI SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] (rev 03) is the card to have for other distros. It has on chip per 4 ports 8 total. Is that not an ahci card when in IT mode? Either way I dont want to get in a situation where I lose 30 tb of media. I need to check plex in docker with some mod to let transcoding pass on as 3622. I am using that with my old hp54 to test. Works well. I need to dig deeper in the forums as you stated. But changing cards that would allow serial/model number to pass to the 918+ is the easier answer I will check IG-88s posts on this. TY PG
  5. Is the idea of a HBA IT mode using 918+ just dead in the water with the issues it has saving serial/model numbers? As that is our only transcoding option? I am ready to jump ship but I will cry the entire way. TY CD
  6. Same boat as you. Interested in the answer you your last question.
  7. Thank you all. I have all the plex data backed up to 2 Truenas Servers. Is there any chance that the 918 will get real smart data with a driver update or is a dead end? If there is a chance I like to be involved in the development thread. TY CD
  8. Thank you Peter Suh. M.2 is not that important to me or this plex server if it will jeopardize the raid 5 btrfs. As I see it in the chart quicksync transcoding is not an option on any other platform except DS918+ I use 8 hdds. 4 8tb 2 10tb and 2 14tb. On the H200. Logically I am out of options unless you can enlighten me with an alternative. Other than Truenas Scale (drives are a mix). or Unraid (poor performance IMO) Thank you again. CD
  9. ok the motherboard is a Asus Z170-A. let me know your thoughts. ty CD
  10. Yes Because of QuckSync and Plex. I will send Asus motherboard info when i arrive home. Thank you again for sticking with me. CD i was able to get dsm 7 installed. I tried to put all my sata in hot swap mode - no luck. I just turned off my motherboards sata and it worked just fine. Not sure why but it did. I would like to get my nvme drive working for cache. I will need to test that. I will pull that log when i do a new usb to test nvme with sata on. When I to override satamap and put the ports to 14 it failed and said anything over 9 does not work at this time.. Is that true? ty CD
  11. i was able to get dsm 7 installed. I tried to put all my sata in hot swap mode - no luck. I just turned off my motherboards sata and it worked just fine. Not sure why but it did. I would like to get my nvme drive working for cache. I will need to test that. I will pull that log when i do a new usb to test nvme with sata on. When I to override satamap and put the ports to 14 it failed and said anything over 9 does not work at this time.. Is that true? ty CD
  12. My last build last night posted this: [#] Filling-in newly downloaded recipe for extension pocopico.mpt3sas platform ds918p_42661 [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/releases/mpt3sas-4.4.180plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds918p_42661/mpt3sas-4.4.180plus.tgz ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds918p_42661/mpt3sas-4.4.180plus.tgz file... [OK] [#] Unpacking files from /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds918p_42661/mpt3sas-4.4.180plus.tgz to /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds918p_42661/... [OK] [#] Downloading remote file https://raw.githubusercontent.com/pocopico/rp-ext/master/mpt3sas/src/check-mpt3sas.sh to /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds918p_42661/check-mpt3sas.sh ######################################################################### 100.0% [#] Verifying /home/tc/redpill-load/custom/extensions/pocopico.mpt3sas/ds918p_42661/check-mpt3sas.sh file... [OK] [#] Successfully processed recipe for extension pocopico.mpt3sas platform ds918p_42661 [#] Downloading remote file https://github.com/RedPill-TTG/redpill-boot-wait/raw/master/recipes/universal.json to /home/tc/redpill-load/custom/extensions/_ext_new_rcp.tmp_json Working in bios now then a new build
  13. Can Confirm the build seen, downloaded and loaded the mpt3sas. I am going to make sure all my MB ports are set to hotswap and turn of NVME and do a fresh build as it only takes a few minutes. Thank you for sticking with the thread I will post the build log later tonight. tyty CD
  14. Thank you. worked fine in 6.1. I will check get hub for a better driver.
×
×
  • Create New...