Jump to content
XPEnology Community

Stoker

Rookie
  • Posts

    3
  • Joined

  • Last visited

Stoker's Achievements

Newbie

Newbie (1/7)

0

Reputation

  1. OK, but I have only one Controller with 4 Ports in my T20, and it does't help if I set it to "4". In the past "422" never was a Problem. I thougt so too, but I tryed every Port with every HDD now. Since I have no Raid configured it should be possible to disconnect 3 of the Harddrives and try all four ports with the remaining one, is that right?
  2. Hello, has someone out there a clue how to fix that?
  3. Hi guys, I'm using XPENology 6.02 with Juns Loader for a few months on ma DELL T20 with four Harddrives on the onboard SATA Controller without any Problems. Three days ago I disconnected all Drives to do a Firmwareupdate on one of the drives (but I didn't do the Update after all). So I Connected all the drives again and wanted to start the Server, but it didn't work. The Boot screen is showing the same screen as before, but I cant connect to the web Interface and the DS Finder doesn't find the Diskstation. Furthermore the DS doesn't connect to my Router. I booted to the config Menu of the Diskstation and now the DS gets a IP via DHCP and I can connect to the Web Interface, there is written, that there are failures with the HDDs on SATA Port 5 and 6 and that the SATA Ports has been disabled. The strange thing is, that the T20 doesn't have a SATA Port 5 and 6, it only has 4 SATA Ports. In the config file of Juns Loader I configured the SATA ports as "422", but that never was a problem. I don't now what to do right now, does someone has a clue whats the Problem? Please help me
×
×
  • Create New...