Jump to content
XPEnology Community

ttsume

Rookie
  • Posts

    7
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ttsume's Achievements

Newbie

Newbie (1/7)

0

Reputation

  1. unfortunately no, it was not possible to win work on the 30th series, I tried it on r630\730, I also tried it on r620, it was installed immediately without any manipulations, so I had to switch to the platform with supermicro +hba card, everything immediately worked perfectly...
  2. I checked both versions, and neither was installed. The installation begins and the moment of transfer of the pat file to install it cannot load completely, I did via a web browser chrome at the time of transfer in the lower left corner is always read as 0%(send status of the file upload), but the meter is in the center of the screen says that the installation continues up to 95% and hangs.... I think the problem lies in the support for controller perc H730, or the problem is that this server configuration the two socket and the system just can't work with this chipset(C610/X99 )
  3. IG-88 please tell me where to get the latest versions extra3615/3617???
  4. I will describe my server in more detail 2x Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz 3x Samsung SSD 860 PERC H730 Mini RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller QLogic 577xx/578xx 10 Gb Ethernet BCM57840 What I've already tried: bootloader 1.03b install DSM_DS3615xs_23739.pat does not work bootloader 1.03b install DSM_DS3615xs_24922.pat does not work bootloader 1.03b install DSM_DS3617xs_23739.pat does not work bootloader 1.03b install DSM_DS3617xs_24922.pat does not work I also tried adding extra3615_v0.5_test does not work
  5. I used bootloader 1.03 and 1.02 (3615 and 3617) I also tried to load the file with extra.lzma drivers But the result is a hang at the time of installation .pat or does not see the network
  6. It is not possible to put xpenology on this server, every other time it dont sees the network when starting the loader, or it freezes at the moment of loading .pat and its installations inside there are such network cards: QLogic 577 xx/578xx 10 GB Ethernet BCM57840 BRCM 10G/Ge 2+2P 57800-t rNDC PERC H730 Mini in mode HBA I tried both 3615 and 3617.....who knows how to do it tell me pls pls pls)))
  7. There were following problems when using ISCSI 1) Connection of ISCSI of a target happens rather long time from 1 to 5 min. 2) When copying big files everything is normal, but if to copy on iscsi a disk files of the small volume (kb) that copying can reach for hours 3) Also when copying small files sometimes there is a lag then only disconnection from a target helps If who knows the solution of this problem I will be very grateful... The storage is brought together on the supermicro server with network optical interfaces therefore connection of iscsi happens on 10G to the interface
×
×
  • Create New...