Jump to content
XPEnology Community

jhanusortho

Rookie
  • Posts

    7
  • Joined

  • Last visited

jhanusortho's Achievements

Newbie

Newbie (1/7)

0

Reputation

  1. Bon problème résolu. Apres changement du disque 1 et reconstruction complète rien n'a changé Je me suis connecte en telnet puis j'ai kill tous les services syno (syno_poweroff_task), puis j'ai lancé un fsck.ext4 qui a pris environ 1 heure et m'a repéré plein d'erreurs qu'il a corrigé. Un reboot et c'est reparti comme avant. Merci de vous être penché sur le problème Une bonne soirée / journée
  2. Merci pour ce retour en fait en collant le résultat des commandes je me suis dit en moi même qu'effectivement le disque 1 et 3 présentaient quelques légers soucis J'ai anticipe le changement du disque 1 et actuellement le raid est en reconstruction donc j'attend la fin pour voir et si jamais je changerai le disque 3 Les données importantes sont déjà sauvegardées sur le 2eme NAS, seules restent des choses que je peux retrouver sur internet (en galérant un peu mais rien d'insurmontable) Je tiens au jus pour la suite
  3. merci encore pour les retour @nicoueron le reparer est justement grisé @JacquesF resultat de la commande : for DISK in /dev/sd[a-z] ; do echo $DISK ; smartctl -d sat -i -A $DISK ; done /dev/sda smartctl 6.5 (build date Mar 12 2020) [x86_64-linux-3.10.105] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD20EZRX-00D8PB0 Serial Number: WD-WCC4M3524678 LU WWN Device Id: 5 0014ee 2b4fe24af Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jun 4 11:55:05 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 4 3 Spin_Up_Time 0x0027 178 170 021 Pre-fail Always - 4100 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2215 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 6 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 028 028 000 Old_age Always - 52985 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 224 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 206 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2755 194 Temperature_Celsius 0x0022 115 106 000 Old_age Always - 32 196 Reallocated_Event_Count 0x0032 194 194 000 Old_age Always - 6 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 /dev/sdb smartctl 6.5 (build date Mar 12 2020) [x86_64-linux-3.10.105] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Red Device Model: WDC WD20EFRX-68EUZN0 Serial Number: WD-WCC4M0574076 LU WWN Device Id: 5 0014ee 209551ee6 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jun 4 11:55:05 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 178 171 021 Pre-fail Always - 4083 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5183 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 011 011 000 Old_age Always - 65579 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 281 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 224 193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 5015 194 Temperature_Celsius 0x0022 114 108 000 Old_age Always - 33 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 /dev/sdc smartctl 6.5 (build date Mar 12 2020) [x86_64-linux-3.10.105] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD20EARX-22PASB0 Serial Number: WD-WCAZAA869609 LU WWN Device Id: 5 0014ee 2065b6333 Firmware Version: 51.0AB51 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jun 4 11:55:05 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 22 3 Spin_Up_Time 0x0027 178 168 021 Pre-fail Always - 6091 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5570 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 1 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 73842 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 596 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 237 193 Load_Cycle_Count 0x0032 119 119 000 Old_age Always - 243268 194 Temperature_Celsius 0x0022 116 092 000 Old_age Always - 34 196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 2 /dev/sdd smartctl 6.5 (build date Mar 12 2020) [x86_64-linux-3.10.105] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Green Device Model: WDC WD20EARX-00PASB0 Serial Number: WD-WMAZA9181259 LU WWN Device Id: 5 0014ee 206f26c6b Firmware Version: 51.0AB51 User Capacity: 2,000,397,852,160 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jun 4 11:55:05 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 1 3 Spin_Up_Time 0x0027 174 162 021 Pre-fail Always - 6258 4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5362 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 001 001 000 Old_age Always - 75624 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 464 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 399 193 Load_Cycle_Count 0x0032 182 182 000 Old_age Always - 54315 194 Temperature_Celsius 0x0022 116 108 000 Old_age Always - 34 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 /dev/sde smartctl 6.5 (build date Mar 12 2020) [x86_64-linux-3.10.105] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD20EZRZ-00Z5HB0 Serial Number: WD-WCC4M7ESS885 LU WWN Device Id: 5 0014ee 20d65c350 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jun 4 11:55:05 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 176 169 021 Pre-fail Always - 4175 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 94 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15383 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 94 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 84 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 483 194 Temperature_Celsius 0x0022 112 109 000 Old_age Always - 35 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 /dev/sdf smartctl 6.5 (build date Mar 12 2020) [x86_64-linux-3.10.105] (local build) Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Western Digital Blue Device Model: WDC WD20EZRZ-00Z5HB0 Serial Number: WD-WCC4M1FZ5DCE LU WWN Device Id: 5 0014ee 20cafe594 Firmware Version: 80.00A80 User Capacity: 2,000,398,934,016 bytes [2.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Fri Jun 4 11:55:05 2021 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 172 168 021 Pre-fail Always - 4366 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 213 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 039 039 000 Old_age Always - 44537 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 213 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 198 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 704 194 Temperature_Celsius 0x0022 111 106 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0
  4. Bonjour, Merci pour les retours Alors déjà j'ai dit n'importe quoi c'est un NL40 et pas un NL 54, j'ai confondu avec l'autre Ensuite : - 6 disque sata 2To - 1 volume en SHR - DSM 6.2.3 update 3 - loader 1.03b - Pour les commandes : cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [raidF1] md2 : active raid5 sda5[7] sde5[6] sdf5[5] sdd5[4] sdc5[3] sdb5[1] 9743898240 blocks super 1.2 level 5, 64k chunk, algorithm 2 [6/6] [UUUUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] sde2[4] sdf2[5] 2097088 blocks [12/6] [UUUUUU______] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] sde1[4] sdf1[5] 2490176 blocks [12/6] [UUUUUU______] unused devices: <none> lvm pvscan PV /dev/md2 VG vg1000 lvm2 [9.07 TiB / 0 free] Total: 1 [9.07 TiB] / in use: 1 [9.07 TiB] / in no VG: 0 [0 ] lvm vgscan Reading all physical volumes. This may take a while... Found volume group "vg1000" using metadata type lvm2 lvm vgdisplay --- Volume group --- VG Name vg1000 System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 8 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 1 Act PV 1 VG Size 9.07 TiB PE Size 4.00 MiB Total PE 2378881 Alloc PE / Size 2378881 / 9.07 TiB Free PE / Size 0 / 0 VG UUID PbeLsh-KkiZ-7pvB-BhDv-RXaP-p4Xs-RFtKgS mdadm --detail /dev/md* /dev/md0: Version : 0.90 Creation Time : Fri Jun 4 07:23:49 2021 Raid Level : raid1 Array Size : 2490176 (2.37 GiB 2.55 GB) Used Dev Size : 2490176 (2.37 GiB 2.55 GB) Raid Devices : 12 Total Devices : 6 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Fri Jun 4 10:49:29 2021 State : clean, degraded Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 UUID : 7c8a7077:30c291d5:3017a5a8:c86610be Events : 0.1895 Number Major Minor RaidDevice State 0 8 1 0 active sync /dev/sda1 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 8 49 3 active sync /dev/sdd1 4 8 65 4 active sync /dev/sde1 5 8 81 5 active sync /dev/sdf1 - 0 0 6 removed - 0 0 7 removed - 0 0 8 removed - 0 0 9 removed - 0 0 10 removed - 0 0 11 removed /dev/md1: Version : 0.90 Creation Time : Fri Jun 4 07:23:52 2021 Raid Level : raid1 Array Size : 2097088 (2047.94 MiB 2147.42 MB) Used Dev Size : 2097088 (2047.94 MiB 2147.42 MB) Raid Devices : 12 Total Devices : 6 Preferred Minor : 1 Persistence : Superblock is persistent Update Time : Fri Jun 4 07:55:34 2021 State : clean, degraded Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 UUID : f040bb88:397f39e8:3017a5a8:c86610be Events : 0.14 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 18 1 active sync /dev/sdb2 2 8 34 2 active sync /dev/sdc2 3 8 50 3 active sync /dev/sdd2 4 8 66 4 active sync /dev/sde2 5 8 82 5 active sync /dev/sdf2 - 0 0 6 removed - 0 0 7 removed - 0 0 8 removed - 0 0 9 removed - 0 0 10 removed - 0 0 11 removed /dev/md2: Version : 1.2 Creation Time : Thu Nov 21 07:42:47 2013 Raid Level : raid5 Array Size : 9743898240 (9292.51 GiB 9977.75 GB) Used Dev Size : 1948779648 (1858.50 GiB 1995.55 GB) Raid Devices : 6 Total Devices : 6 Persistence : Superblock is persistent Update Time : Fri Jun 4 07:55:45 2021 State : clean Active Devices : 6 Working Devices : 6 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 64K Name : DiskStation:2 UUID : 2690d820:c7d5af3d:805aceaf:c4cae3f2 Events : 4821225 Number Major Minor RaidDevice State 7 8 5 0 active sync /dev/sda5 1 8 21 1 active sync /dev/sdb5 3 8 37 2 active sync /dev/sdc5 4 8 53 3 active sync /dev/sdd5 5 8 85 4 active sync /dev/sdf5 6 8 69 5 active sync /dev/sde5 Merci encore de vous pencher sur mon probleme
  5. Bonjour/soir à tous. Voila mon gros souci, j'ai un XPEnology sous NL54 sans virtu qui fonctionne depuis des années sans aucun soucis Utilisation en stockage de fichiers et du plex Il a décidé aujourd'hui de m'afficher mon volume 1 en panne alors que tous mes disques apparaissent comme sains. N'ayant pas la place de récupérer les gros fichiers stockés dessus afin de supprimer le volume, j'aimerai savoir s'il existe une autre solution/piste. Mon volume est du SHR en ext4 Je peux me connecter dessus en SSH ainsi que sur les partages SMB mais uniquement en lecture seule. J'ai déjà tenté une reinstall DSM qui va jusqu'au bout mais sans résultat Help me please @ bientot
  6. Bonjour a tous. Je me suis monté un petit NAS avec du matériel de recup Une carte mère prise dans un vieux Acer disposant de 6 ports sata L'installation DSM6 se fait sans problème mais par contre je ne me retrouve qu'avec 4 disque dur sur les 5 branchés j'ai vu qu'il fallait modifier des paramètres dans synoinfo (internalport et esataport) mais je nage et je ne sais quoi mettre Y aurait il qq pour m'aiguiller. Par avance merci
  7. Bonjour à tous, Je vous expose mon problème: je dispose d'un NL40 sous DSM 5.2-5565 Update 2 avec un serveur plex d'installé Avec lui absolument aucun problème pour lire les films dessus que ce soit par directement par ma tv (qui inclue un client plex) ou par le navigateur tout est fluide J'ai monté a coté un 2nd xpeno sous DSM 6.0.2-8451 Par contre de son coté impossible de lire de manière fluide. il tourne sous un phenom 8400 Apres moultes recherches le problème semblerait venir de la puissance de la machine "serveur" Il faudrait apparemment un passmark d'au moins 2000 afin de faire tourner plex correctement La ou je ne comprend pas le NL40 équipé d'un turion neo 2 K625 a un passmark de 973 alors que mon phenom est à 1658 Quelqu'un aurait il une idée ou je passe a coté de qq chose? merci d'avance
×
×
  • Create New...