andyrav

HI Without reading i upgraded from 6.1 to 6.2-23739 using 1.03b DS3615xs on a HP NL54 Now when i start DISKSTATION none of my services have started, i can access the GUI. if i start a service 2 minutes later it has stopped. I can see see all my data (few) Is there a easy way to downgrade back to 6.1? can i just select reinstall and use 6.1 pat file? many thanks

Hi Does anyone have any info on how to Migrate/Upgrade from 6.0.x to 6.1.x which ever option i select on boot ie reinstall does not give me the migration screen in find.synology.com the diskstation just boots as normal. any ideas? cheers

Hi Running jun's loader v1.1 with DMS 6.0.2-8451 Update 4 everything is working, but the whole system is so so slow. To get to the gui take 20 seconds same again to login, basically everything you click or access is slow. System is not doing any diskcheck etc, CPU @ 25% RAM 35% Running on HP NL45 with 4GB RAM. any ideas?

Slow as in take about 20 seconds to display GUI screen when enter IP of diskstation and about same again to login. Server shows not doing any drive maintenance, cpu only running around 25% RAM 35% any ideas?

Hi I have installed version 6.0.4 onto my HP NL54 4GB Ram Baremetal has anyone noticed they whole system been slow? Was fine with DMS 5.2 Cheers

Hi I am currently on DSM 5.2-5644 Update 5 running on a HP NL54. Does anyone have any instrunction how to upgrade to DMS 6? Is it just the case of writing synoboot.img from the DS3615xs 6.0.2 Jun's Mod V1.01.zip to USB and rebooting, then doing the same as before select install/upgrade, then migration from within Synology Assistant? many thanks

Hi After some help, My Volume1 as a status of NORMAL but it is still saying NUMBER OF DISK FAILED = 1 and DEGRADED. if i Try and swap out the disk that has ERRORS with Smart ABNORMAL when i get NUMBER OF DISK FAILED = 2 and can not repair it. Once i installed the removed disk again it the Volume is NORMAL running DSM 5.2-5644 Update 5 any ideas? cheers

I have connect a USB wifi dongle which was not detected when i go into DMS. any know the command to find out what drivers are needed? cheers andy

Hi i would like to start by VPN connection at a set time via cron and stop at a set time. Does anyone know the command to start/stop the VPN client I am running DMS 5 cheers andy

Got web and photo working. from the GUI Created a new group called 'http' with read/write on web folder restarted web services reinstalled Photo Station. All working... No setting/photos lost in the gallery

Got it working. from the GUI Created a new group called 'http' with read/write on web folder restarted web services reinstalled Photo Station. All working... No setting/photos lost in the gallery sweet

Upgraded to DMS5 all data still there and it looks to be fixing the raid issue. Like to web service and photo station wont run any ideas

dont know how that has happened. do you think it is going to be best to start again? guess this way i could use DMS5

DiskStation> lvm pvdisplay --- Physical volume --- PV Name /dev/md2 VG Name vg1000 PV Size 685.11 GB / not usable 1.19 MB Allocatable yes (but full) PE Size (KByte) 4096 Total PE 175388 Free PE 0 Allocated PE 175388 PV UUID FzLv7t-DA16-xeBu-HoKr-Ye0S-2i1F-9mSCxv --- Physical volume --- PV Name /dev/md3 VG Name vg1000 PV Size 3.41 TB / not usable 1.00 MB Allocatable yes (but full) PE Size (KByte) 4096 Total PE 894236 Free PE 0 Allocated PE 894236 PV UUID NLJAYw-rf6e-eUHi-z9Xw-xmLI-hzi0-PmuOLK --- Physical volume --- PV Name /dev/md4 VG Name vg1000 PV Size 465.74 GB / not usable 448.00 KB Allocatable yes (but full) PE Size (KByte) 4096 Total PE 119230 Free PE 0 Allocated PE 119230 PV UUID YzXNLl-m1YV-v400-3w3p-eS5o-ZX00-BfyWPT DiskStation> lvm vgdisplay --- Volume group --- VG Name vg1000 System ID Format lvm2 Metadata Areas 3 Metadata Sequence No 11 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 1 Max PV 0 Cur PV 3 Act PV 3 VG Size 4.54 TB PE Size 4.00 MB Total PE 1188854 Alloc PE / Size 1188854 / 4.54 TB Free PE / Size 0 / 0 VG UUID oLPI1t-z20M-RUm0-rQ5K-OrUB-0w85-5yjEgB

cheers login as: root root@192.168.0.4's password: BusyBox v1.16.1 (2014-02-11 20:19:16 CST) built-in shell (ash) Enter 'help' for a list of built-in commands. DiskStation> cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md4 : active raid1 sda7[0] sdc7[1] 488366784 blocks super 1.2 [2/2] [uU] md3 : active raid5 sdd6[4] sdb6[0] sdc6[3] sda6[1] 3662792256 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md2 : active raid5 sda5[0] sdc5[4] sdd5[5] sdb5[1] 718391040 blocks super 1.2 level 5, 64k chunk, algorithm 2 [4/4] [uUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[2] sdd2[3] 2097088 blocks [12/4] [uUUU________] md0 : active raid1 sda1[0] sdb1[1] sdc1[2] sdd1[3] 2490176 blocks [12/4] [uUUU________] unused devices: DiskStation> df -h Filesystem Size Used Available Use% Mounted on /dev/md0 2.3G 674.6M 1.6G 29% / /dev/md0 2.3G 674.6M 1.6G 29% /proc/bus/pci /tmp 1.9G 972.0K 1.9G 0% /tmp /dev/sdw1 15.2M 10.0M 4.4M 70% /volumeUSB1/usbshare /dev/sdv1 931.5G 752.4G 179.2G 81% /volumeUSB2/usbshare /dev/sdu 1.4T 955.6G 441.7G 68% /volumeUSB3/usbshare /var 2.3G 674.6M 1.6G 29% /usr/local/zarafa-licensed/var /dev/vg1000/lv 4.5T 3.1T 1.4T 69% /volume1 DiskStation> lvdisplay --- Logical volume --- LV Name /dev/vg1000/lv VG Name vg1000 LV UUID ySDjQz-e5FC-02Oo-tvE6-RaM8-gX98-JAR2GV LV Write Access read/write LV Status available # open 1 LV Size 4.54 TB Current LE 1188854 Segments 5 Allocation inherit Read ahead sectors auto - currently set to 4096 Block device 253:0 DiskStation>