Jump to content
XPEnology Community

androtech

Rookie
  • Posts

    4
  • Joined

  • Last visited

androtech's Achievements

Newbie

Newbie (1/7)

0

Reputation

  1. DSM says that my system partition is crashed and I should backup and reinstall everything The only disk of the volume md0 that seems to work is /dev/sdj1; I've 2 spares disks but sysnc does not start probably because the status of the disk /dev/sdj1 is [E] (error) How can solve this issue without reinstall everything? ash-4.3# mdadm -D /dev/md0 /dev/md0: Version : 0.90 Creation Time : Wed Jun 15 13:58:01 2016 Raid Level : raid1 Array Size : 2490176 (2.37 GiB 2.55 GB) Used Dev Size : 2490176 (2.37 GiB 2.55 GB) Raid Devices : 12 Total Devices : 3 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Fri Jan 20 09:40:08 2017 State : clean, degraded Active Devices : 1 Working Devices : 3 Failed Devices : 0 Spare Devices : 2 UUID : bd8c8583:63c691fc:3017a5a8:c86610be Events : 0.1926824 Number Major Minor RaidDevice State 0 0 0 0 removed 1 0 0 1 removed 2 0 0 2 removed 3 0 0 3 removed 4 0 0 4 removed 5 0 0 5 removed 6 0 0 6 removed 7 0 0 7 removed 8 8 145 8 active sync /dev/sdj1 9 0 0 9 removed 10 0 0 10 removed 11 0 0 11 removed 12 8 129 - spare /dev/sdi1 13 8 161 - spare /dev/sdk1 ash-4.3# cat /proc/mdstat Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] md2 : active linear sdb3[0] sdf3[4] sde3[3] sdd3[2] sdc3[1] 500177920 blocks super 1.2 64k rounding [5/5] [uUUUU] md1 : active raid1 sda2[0] sdb2[1] sdc2[4] sdd2[3] sde2[2] sdf2[5] sdg2[6] sdh2[10] sdi2[9] sdj2[8] sdk2[7] 2097088 blocks [12/11] [uUUUUUUUUUU_] md0 : active raid1 sdi1[12](S) sdj1[8](E) sdk1[13](S) 2490176 blocks [12/1] [________E___] unused devices:
  2. I'm using the vm "DSM 6 (11 No SS)" on vmware 12 workstation. Everything works fine execept the network card; it works only in NAT. If I configure it in BRIDGE it does not work. Has someone tried this configuration?
  3. I tried a lot of time to install DSM6 on vmware or virtualbox whithout any good result. After I installed the .pat the system does not boot. Please, can someone write briefly steps to install DSM?
  4. There is nothing more to see. It is not stuck. Just go to find.synology.com and configure via browser on another machine. It cant find it, also when i scan my network for devices it doesnt show Up. I rebooted with original boot.vmdk too and I stucked in the same way. It does not boot properly.
×
×
  • Create New...