Jump to content
XPEnology Community

janostasik

Member
  • Posts

    15
  • Joined

  • Last visited

janostasik's Achievements

Newbie

Newbie (1/7)

0

Reputation

  1. Hi, I've run the upgrade smoothly. Previously I was running on DSM 6.0. I've just prepared the USB stick with Alpha loader, change it with old one, boot up the server and it worked like a charm. Only issue I've had was, when I've downloaded .img file and tried to modify it, system tells me file is corrupt. So then, I've took WIN32DiskImager, burned .img as it was on USB and than modified grub.cfg file with correct SN, vid and pid and mac addresses///
  2. Can you elaborate it? What kind of permissions? For whom and where? On previous build 6.02 I've just installed MariaDB via package manager, run it and use it...no additional setup, config etc....
  3. Hi Guys, I've successfully upgraded my bare metal Microserver Gen8 with new Jun's Loader 1.02alpha. Upgrade was smooth and pretty straight forward without any issues. I am running on it around one week and I am experiencing no issues at all comparing to 6.02. I didn't tried BTRFS yet...but not this I want do discuss... I found out an issue with one package...MariaDB...after DSM upgrade, I've upgraded package MariaDB to the most recent version 5.5.53-0073 Upgrade of package went smooth but It cannot start the service. I am not able to start it manually. Just a message Failed to run package service....damn...log is empty in package manager...when I logged into DSM via SSH, /var/log/messages tells me this: 2017-03-08T17:50:16+01:00 js-nas-01 synoddsmd_SYNO.License_1_check_sync[16864]: get_license_json.cpp:23 Failed to get license from database 2017-03-08T17:50:16+01:00 js-nas-01 synoddsmd_SYNO.License_1_check_sync[16864]: get_license_info.cpp:11 Failed to get license from database 2017-03-08T17:50:16+01:00 js-nas-01 synoddsmd_SYNO.License_1_check_sync[16864]: check_sync.cpp:36 Failed to get license info 2017-03-08T17:56:41+01:00 js-nas-01 synoscgi_SYNO.Core.Package.Control_1_start[5502]: resource_api.cpp:163 Acquire syslog-config for MariaDB when 0x0008 (done) 2017-03-08T17:56:41+01:00 js-nas-01 appindex: index_mgr.cpp:170 (5627, 0) Add: /var/packages/MariaDB/target/ui/index.conf [err: No such file or directory] 2017-03-08T17:56:43+01:00 js-nas-01 [252329.928743] init: pkgctl-MariaDB pre-start process (5611) terminated with status 1 2017-03-08T17:56:43+01:00 js-nas-01 synoscgi_SYNO.Core.Package.Control_1_start[5502]: servicecfg_internal_lib.c:187 Failed to start job [pkgctl-MariaDB][0xD900 privilege.cpp:60] 2017-03-08T17:56:44+01:00 js-nas-01 synoscgi_SYNO.Core.Package.Control_1_start[5502]: service_initjob_action.c:27 InitJobStart failed, [0xD900 privilege.cpp:60] 2017-03-08T17:56:44+01:00 js-nas-01 synoscgi_SYNO.Core.Package.Control_1_start[5502]: pkgstartstop.cpp:273 Failed to start pkgctl-MariaDB (err=-1) [0xD900 privilege.cpp:60] 2017-03-08T17:56:44+01:00 js-nas-01 synoscgi_SYNO.Core.Package.Control_1_start[5502]: resource_api.cpp:231 Release syslog-config for MariaDB when 0x0010 (done) ...what a hell is: 1. Failed to get license from database - WTF??? 2. /var/packages/MariaDB/target/ui/index.conf [err: No such file or directory] - where this directory is there and exists WTF2 Please any advice is appreciated....
  4. Hi guys, may I ask you for an advice which setting you have enabled in BIOS under sata controller option? I've got enabled embedded raid controller, everything is working fine, but in iLO i can see disks connected to standard IDE controller. Its is OK in regards of speed? Don't I need to switch bios setting for SATA AHCI controller? Thank you so much.... PS: On second microserver where I am running esxi just as lab, I've enabled SATA ahci controller and iLO and esxi sees it as Cougar 6port SATA controller so thats I am not sure what happen with juns loader when I change this setting to SATA ahci controller.... PS2: I am running on Juns loader
  5. Hi Guys, may I ask you for a lil help. I am really noob on this field. I'd like to have additional SATA controller card for 2xSATA for my HP Microserver Gen8. I know there is an ODD position for SSD but I want to have 2 additional SSDs and use them as write cache. Can you recommend me product which will fit into microserver and will work with Jun's loader I am currently running on? Thank you so much.
  6. Guys, can you share, if anyone got, .PAT file DSM update 6 or 7 or 8? I need to reinstall it and dont want to use latest update 9 which is causing the troubles.... Thank you...
  7. Guys, finally I am running on Juns loader, dsm update 4. Is it safe to do in dsm automatic upgrade to update 7? Thank you.
  8. Yesterday I did upgrade with Juns loader, it worked like a charm...only thing...SATA driver for Marvel SE9172 is not included/supported....guys can you somehow check if this change on release 2.3? I really 'd like to use additional sata ports controlled by SE9172 Thank you.
  9. Guys, can anyone confirm if version 2.2 works with SATA controller C236? Considering to buy ASrock C236WSI MOBO with dual gigabit, 8x SATA3 and slot for intel xeon....
  10. 2. Marvell storage is built into OEM kernel. Unfortunatly partially only ... as SAS/e-Sata Marvell with port multiplier (FIS) is not implemented into OEM ... Still only FreeNAS as fully supporting (for NAS emulation, as Ubuntu etc. implement well the standard FIS port multiplier protocol) Thats what I afraid of....also on 5.2 build my two marvel ports are disabled because they causing an issues to xpen...i'd like to really use them but apparently I need to start thinking of new MOBO....
  11. Hi Quicknick...i dont want to be a pain in the a..i have a two questions: 1. How long should we wait for upgrade procedure?? Approximately....days, weeks, months?? Or we just have to use juns boot loader and do the upgrade. Not sure if i should wait or start screwing my own stuff :) btw...very very thx for your great work 2. Will be SATA controller Marvell SE9172 supported? I'd like to avoid buying new MOBO :) BIG THX MAN...YOU ROCKS...and Merry Christmas
  12. HI, can you confirm that everything is running properly? Which PAT file you use for manual upgrade..or automatic upgrade to latest DSM?
  13. Guys, any of you tried Xpenology on ASRock 970 Extreme3 R2.0? First of all, after boot to prompt usb keyboard hangs but drives are acting very weird and randomly put different errors...any advice on ATX board with AM3+ socket compatible with XPen? Thank you.
  14. Guys, is this helpful or its a bullshit?? https://sourceforge.net/projects/dsgpl/ ... rce=navbar there is toolchain and toolkit for DSM6.0
×
×
  • Create New...