Jump to content
XPEnology Community

ema

Member
  • Posts

    54
  • Joined

  • Last visited

  • Days Won

    2

ema last won the day on August 23 2017

ema had the most liked content!

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

ema's Achievements

Regular Member

Regular Member (3/7)

5

Reputation

  1. I can confirm it works for me too (HW transcoding is ok w real sn & mac). I used a minipc (minisforum GK41 / J4125 / 8Gb / 1tb SSD / dual realtek nic) Thanks to all!
  2. ema

    DSM 6.1.x Loader

    For a better result I will make the following change: - add a sata controller and connect hdd 1 (xpe.vmdk) to it on port sata0:0 - move hdd2 (xpe_1.vmdk) to scsi controller 0 port 0 and remove scsi controller 1 In this way you will see in DSM only data disk and not the boot disk with state "not initialised" Ciao ema
  3. I agree with @hpk Microserver gen8 gt1610t baremetal fan 12-15% ciao ema
  4. I installed it on esxi 6.5 just for testing... here there's not /dev/dri/card0 Ciao ema Execute the command: lsmod ash-4.3# lsmod | grep card ash-4.3# ash-4.3# lsmod Module Size Used by cifs 246536 2 udf 81376 0 isofs 32127 0 loop 17423 0 iscsi_target_mod 220762 1 target_core_ep 48756 2 target_core_file 29955 1 target_core_iblock 14240 1 target_core_mod 366535 13 target_core_iblock,iscsi_target_mod,target_core_ep,target_core_file syno_extent_pool 1290661 0 rodsp_ep 75623 2 syno_extent_pool,target_core_file hid_generic 1113 0 usbhid 25479 0 hid 82660 2 hid_generic,usbhid usblp 10474 0 uhci_hcd 22739 0 ehci_pci 3560 0 ehci_hcd 40220 1 ehci_pci braswell_synobios 46518 0 ax88179_178a 12076 0 usbnet 17845 1 ax88179_178a ixgbe 152067 0 vmxnet3 38149 0 e1000 100595 0 sfc 156347 0 jme 34553 0 ipg 15901 0 libphy 18253 0 mii 3763 4 ipg,jme,usbnet,ax88179_178a btrfs 869897 1 i915 896981 0 drm_kms_helper 77262 1 i915 cfbfillrect 3738 1 i915 cfbcopyarea 3246 1 i915 cfbimgblt 2159 1 i915 output 1612 0 drm 245894 2 i915,drm_kms_helper fb 32636 3 drm,i915,drm_kms_helper fbdev 758 1 fb intel_agp 10704 1 intel_gtt 12088 2 i915,intel_agp agpgart 26307 3 drm,intel_agp,intel_gtt video 10824 1 i915 backlight 3888 2 i915,video button 4440 1 i915 synoacl_vfs 17118 1 zlib_deflate 20828 1 btrfs hfsplus 93058 0 md4 4129 0 hmac 2689 2 libcrc32c 898 0 mdio 3229 2 sfc,ixgbe compat 4521 0 igb 177156 0 i2c_algo_bit 5120 2 sfc,i915 e1000e 170873 0 fuse 76906 0 vfat 10335 0 fat 50639 1 vfat crc32c_intel 13793 2 aesni_intel 43613 0 glue_helper 4057 1 aesni_intel lrw 3269 1 aesni_intel gf128mul 5466 1 lrw ablk_helper 1676 1 aesni_intel arc4 1832 0 cryptd 6956 2 aesni_intel,ablk_helper ecryptfs 79238 1 btrfs sha512_generic 5064 0 sha256_generic 10452 1 sha1_generic 2390 0 ecb 1841 0 aes_x86_64 7295 1 aesni_intel authenc 6236 0 des_generic 16483 0 ansi_cprng 3732 0 cts 3992 0 md5 2689 2 cbc 2504 0 cpufreq_powersave 918 0 cpufreq_performance 922 0 mperf 1067 0 processor 26076 0 thermal_sys 17969 2 video,processor cpufreq_stats 2849 0 freq_table 2372 1 cpufreq_stats dm_snapshot 26122 0 crc_itu_t 1259 1 udf crc_ccitt 1259 0 quota_v2 3711 0 quota_tree 7770 1 quota_v2 psnap 1709 0 p8022 971 0 llc 3489 2 p8022,psnap sit 14674 0 tunnel4 2053 1 sit ip_tunnel 11448 1 sit ipv6 304625 58 sit,rodsp_ep zram 8073 2 sg 25201 0 megaraid_sas 75118 0 megaraid 40306 0 megaraid_mbox 29219 0 megaraid_mm 7808 1 megaraid_mbox vmw_pvscsi 15623 0 BusLogic 21633 0 usb_storage 47901 0 etxhci_hcd 85866 0 xhci_hcd 85788 0 ohci_hcd 21192 0 usbcore 176526 13 etxhci_hcd,usblp,uhci_hcd,usb_storage,ohci_hcd,ehci_hcd,ehci_pci,usbhid,usbnet,ax88179_178a,xhci_hcd usb_common 1544 1 usbcore el000 17168 0 Ciao ema
  5. I installed it on esxi 6.5 just for testing... here there's not /dev/dri/card0 Ciao ema
  6. ema

    DSM 6.1.x Loader

    +1 ciao ema
  7. Hi guys... Here's a version working on DSM 6.1 amsHelper >> no change, it's the same hpilo.ko >> recompiled for DSM 6.1 https://mega.nz/#!R8dUhDJb!dyYEVSsrWSohPfU5O7Uxo-GisuMKZPZbG4HbeiIeHk0 Ciao ema
  8. ema

    DSM 6.1.x Loader

    Do you have any info on getting that to work? I tried it the other day and failed, so assumed it wasn't supported by XPE. Reboot your gen8 and enter bios (F9). If I remeber well you must disable BIOS serial console, because if you don't do it, when you launch VSP you will see gen8's bios console... Select "BIOS serial console & EMS" >> "BIOS Serial console port" and disable it. Now go to "System Options" >> "Serial Port Options" >> "Virtual Serial Port" >> I have enabled "COM1;IRQ4;3F8h-3FFh" Now exit Bios utility and reboot. Be sure to enable SSH access in iLO (Adrministration >> Access Setting) Now open an SSH session to ilo ip unknown:~ ema$ ssh 10.0.0.100 ema@10.0.0.100's password: User:ema logged-in to ILOXXXXXXXXXX.local(10.0.0.100 / XXXX::XXXX:XXXX:XXXX:XXXX) iLO Advanced 2.50 at Sep 23 2016 Server Name: gen8.lan Server Power: On >hpiLO-> ...and at ilo prompt you must launch VSP. Now restart DSM and you can see serial output and prompt login... >hpiLO-> VSP Virtual Serial Port Active: COM1 Starting virtual serial port. Press 'ESC (' to return to the CLI Session. gen8 login: PS sometimes I can't write anything via serial console, but I don't know why... EDIT ok, I figured it out... you must press return during post to activate serial console... Ciao ema
  9. ema

    DSM 6.1.x Loader

    HP Gen8 with integrated dual nic Upgrade is working but no network after reboot... I connect to my Gen8 with iLO VSP (iLO Virtual Serial Port) and I found that there are 2 file missing from /lib/modules after upgrade: libphy.ko and tg3.ko I have found these two files under /lib/modules/update so I copied them under /lib/modules (don't forget to chmod 644 them) and reboot... now network is working again. I think, as Jun's said, there's something related to update script to fix... but, as other said, clean install work. Ciao ema
  10. Io ho utilizzato 2 x 6tb wd red su un n36l... per cui penso che funzionino senza problemi anche sul tuo... ciao ema
  11. ash-4.3# ps ax | grep amsHelper 14287 ? S 0:42 /sbin/amsHelper -I0 -M1 5 14 16 18 23 99 ash-4.3# lsmod | grep hpilo hpilo 6734 2 image share Ciao ema
  12. Hi! I just updated my test gen8 to update 7 to check what you said, but I can confirm that everything works as with previous versions. So check in previous post what's the correct way to use the driver (hpilo.ko) and the bin (amsHelper). ciao ema
  13. Hi quicknick, awesome work!!! There's any chance to see a DS916 version with hardware acceleration for video's transcoding? Ciao ema
  14. ema

    DSM 6.1.x Loader

    Working AMS and iLO driver for dsm 6 are here http://xpenology.com/forum/viewtopic.php?f=2&t=7640&start=10#p78810 Ciao ema
×
×
  • Create New...