ruffpl

I bought for test camera from Temu ( something like this ). It only got number, qr code, microsd slot, reset hole and no ethernet port. I can get it to work with dedicated app on phone-iCam365 app and camera is shown as CloudCam. I can rotate it it has all functions etc but I want it to work with DSM. By my router I got IP address of it and I add it to Surveillance Station (I tried it for first time)- camera at full hd, H265 codec and it only works by RTSP protocol. I can see by camera when video is shown in thumbnail (with couple seconds delay) but when I try to open it in full window I got error- Can not connect with WebSocket. Any idea how to get it work? Does Surveillance Station got options of rotating camera, sending/receiving audio, night vision, etc? Is there some better option to use it f.ex with Docker and some container (I would like to get more cameras for my home)

I ma running DSM7 as virtual machine on Proxmox. Is there some way for Xpenology to power off without errors when I stop virtual machine?

Is there some modification that can be made to use usb dvbt2 tuner on DSM7? Apparently there is no usb driver support but maybe there is some way to pass it? I am runing on Proxmox and would like to use it in DSM VM but there is no way for me to make it work in Docker container or direct by spk (Tvheadend)

Hello. I am doing first test moving from Redpill and DS918 to ARPL. I got couple questions. I am testing DS3622 with LSI 9200-8i IT mode in Proxmox. I wrote SataPortMap=118 DiskIdxMap=100A00 and my 5 hdds connected to controller are as I wanted number from 3 to 7. Virtual sata drive shows up as number 11. Any idea to get it as number 1 (and 2 as Loader)? I got intel 8500T cpu- is it possible to get transcoding if it is not DS with Celeron J cpu (with f.ex synocodectool-patch), or I need to try with DS920?

Got 918+ working on Proxmox. SAS card with 5x6TB disks is working/ SHR1 from DSM6 was imported with data on it, but I will wipe all drives anyway to have them optimized. I need to check all serials of drives and cables to have them in correct orders/ for now I managed to get it like 1 slot- VM sata 32GB, the rest start from 3 slot and I have no idea how to get them to start from 2 slot. Ps. Does Adding 2 ssds as read/write cache is usefull for home use or it will only cause extra problems?

Ps. I managed to get SAS card to work but in DSM i have disk7 as virtual drive 20GB and 4 ( from 5 attached) disks as disk 13,14,15,16. Tomorrow I will try to finish it/ I need to read what has to be changed.

From my experience You can flash all of those cards with LSI 9211 IT mode: lsi 9211 8i Fujitsu 9211 Dell Perc H200 IBM ServeRAID M1015 Intel RS2WC080 Dell Perc H310

Hi. From yesterday I am trying in Proxmox to get it work as 918+ virtual machine. I had the same PERC card flashed with LSI IT firmware and it was working well on DSM6 with 5 drives in SHR (no important data on it). In previous DSM I just needed to add line " set sata_args='SataPortMap=1 DiskIdxMap=1000' " in grub.cfg and then just pass it to Xpenology VM. Got my 918+ with quad GbE card but SAS card is another problem. Could You guide me what drivers, etc should I add to make it work ( I didnt tried to build my own redpill on usb/docker yet, I am just testing image downloaded from internet)

So I tried today and quad card is working well- got one static connection + one bond made from quad card. Now time for the rest

Hi. Today I tried to switch from DSM6 to DSM7 on Proxmox. After couple tries I got running 918+ on Proxmox but I will finish it some other day because I will be out of home. I have question - how can I add quad GbE card and SAS controller that was working on DSM6? Do I need to create my own boot image with redpill-tool-chain (never tried that) or I can just add netiff num, sata args, sataportmap, etc in grub.cfg like it was in DSM6?

I got Hauppauge Win TV Solo HD DVBT2 tv tuner and can not get it to work in Xpenology (DS918+) when I pass-trough it in Proxmox. What should I do to get DS Video recognize it? Do I need some extra drivers in synoboot or upload it to some DSM system folder to get it work?

Thanks I will try today. Do i need root access or just add socket/serial port?

I have quad GbE pcie card and I want to use it with DS918. All 4 ports are connected to switch with created bond (LACP) connection. When I add second mac with count 2 into grub.cfg they both appear in DSM. If I do the same with 4 mac adresses and change count to 4, DSM still shows only 2 connections. Is it possible to have 4 ports active in DS918?

I am trying to get my quad NIC card working to create bond. I had add 4 mac adresses in grub.cfg as: set mac1=...................F18 set mac2=...................F19 set mac3=...................F1A set mac4=...................F1B I had added 4 pci devices (4 ports) to the VM and it is working - LAN 1 - virtual, LAN2- one of the added ports / also works when I remove virtual -then I have 2 ports that are passed-trough to the VM. Problem is that in DSM it only shows LAN 1 and LAN 2. Is there a way to get LAN 3 and LAN 4 to show up in DSM? I had also tried to create maxlanport=4 eth0_mtu="1500" eth1_mtu="1500" eth2_mtu="1500" eth3_mtu="1500" in /etc.defaults/synoconfig.conf and /etc/synoconfig.conf but none of it help. Can I get some help how to make it work?

Is there a way to get 1GbE quad port card working with DS918 (I would like to bond 4 ports in it). I had edit grub.cfg with 4 mac adresses (instead of original 2), passed 4 pci devices by Proxmox to Xpenology but in DSM/network/network interfaces, there is only LAN1 (virtual intel E1000) and LAN2 (one port from quad card). When I delete Virtual intel card there is also only 2 LAN ports (both from passed card). Is there some way to edit it so DSM will see all 4 ports or it is not possible/ some limit of ds918?